Question about Honda Accord

Open Question

1995 honda accord vtec 2.2 engine diagram - Accord Honda Cars & Trucks

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 299 Answers

SOURCE: ERG valve located on a 2002 Honda Accord ex 3.0 vtec

Right beloww throttle body toward front of car

Posted on Jun 18, 2009

  • 22 Answers

SOURCE: honda civic vtec 1995 - 1998 engine wiring diagram

Go to your local library and ask the Librarian to get you on-line to the Automotive Repair Reference Center, and then to the EBSCO database...you will find all of your wiring diagrams there.

Posted on Oct 07, 2009

  • 14036 Answers

SOURCE: engine bends both intake valves even after a head

VALVE TIMING OFF. WRONG SIZE VALVE.WEAK VALVE SPRING NOT ALLOWING VALVE TO CLOSE ALL THE WAY.

Posted on Nov 09, 2009

  • 1757 Answers

SOURCE: belt routing diagrams for a 1995 honda civic

CLICK on the following LINK. It has all the Diagrams for your Belt that you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Thanks!

http://www.2carpros.com/car_repair_information/year/1995/make/honda/model/civic/1995_honda_civic_drive_belt_routing_diagram.htm

Posted on Feb 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the name of the wiring harness thats needed in a swap from non vtec to vtec


92-00 Honda Engine Swap Wiring Guide VTEC AND NON ...

honda-tech.com/.../92-00-honda-engine-swap-wiring-guide-vtec-non-vt...
Oct 8, 2011 - 92-00 Swap Wiring Guide for VTEC and Non-VTEC ... try to compile one thread that would try to answer pretty much 95% of all questions ... I wanted to do this because often times I end up posting the same thing to ... to ECU harness so using an EX/SI 92-95 engine harness will make VTEC plug and play.

97 accord non VTEC to VTEC ' HondaSwap

hondaswap.com > Model Specific > Accord
Jan 16, 2010 - 15 posts - ‎6 authors The distributors may be different on the vtec/non vtec. .... As was previously stated, allyou need to do is add wiring for VTEC. ... that connect to the ecu to the connectorsthat wire in your engine harness while the engine is out... f22b2 non vetec swap to f22b vtec need help asap
3 posts
Sep 22, 2012
96 accord head swap non vtec to vtec
10 posts
Jun 1, 2012
1990 USDM CRX Si D16A6 to ZC SOHC non-VTEC ...
20 posts
Mar 7, 2012
99 Accord non-vtec to vtec engine swap, need help
5 posts
Sep 27, 2011
More results from hondaswap.com

Nov 03, 2015 | Cars & Trucks

1 Answer

Me esta gastando demasiada gasolina mi honda accord 1995 vtec


1-filtro de aire tapado. 2-sistema de emisiones no funciona correctamente. 3-Falla en el sistema electrico que tiene que ver con el combustible. 4- presion de aire incorrecta en las llantas o noes el tamano de llanta recomendado para ese auto. buena suerte. sammyc47

Feb 24, 2011 | 1995 Honda Accord

2 Answers

On the distributor cap which is the number 1 cylinder


That would depend on which engine that you have in your Honda Accord.

There are three possibility's according to which engine you have, (2.2 liter, 2.2 liter VTEC, and a 2.7 liter V-6) here are all three diagrams, and I hope that they will be of any help to you.


2.2 liter;




8f6cec0.gif






2.2 liter VTEC



69d6c62.gif





2.7 liter V-6;


e0e6814.gif

May 14, 2010 | 1997 Honda Accord

1 Answer

Oil spec


1995 HONDA ACCORD 2.7L 6-cyl Engine Code C27A4 C27A1

Engine Oil Grade 1......API All TEMPS......5W-30
Manual Transmission,......SJ All TEMPS......10W-30, optional 10W-40
Automatic Transmission,MPZA......AF2

CAPACITIES:
Engine, with filter..........4.4 liters
Automatic Transmission, MPZA Initial Fill..........2.7 liters
Automatic Transmission, Total Fill
4 speed MPZA..........6 liters
Manual Transmission, ..........1.9 liters

1995 HONDA ACCORD 2.2L 4-cyl Engine Code F22B1 VTEC

Engine Oil Grade 1......API All TEMPS......5W-30
Manual Transmission,......SJ All TEMPS......10W-30, optional 10W-40
Automatic Transmission,A0YA......AF2

CAPACITIES:
Engine, with filter..........4.3 liters
Automatic Transmission, A0YA Initial Fill..........2.4 liters
Automatic Transmission, MP0A Initial Fill..........2.4 liters
Automatic Transmission, Total Fill
4 speed A0YA..........6 liters
4 speed MP0A..........6 liters
Manual Transmission, ..........1.9 liters

Jan 07, 2010 | 1995 Honda Accord

1 Answer

Deciding on buying 2 cars, a 94 accord LX w/ 170K, the engine is so quiet it seems to perfect (its at a dealership). The 95 EX with 122K is not as quiet, has a VTEC engine and is really only loud when I...


Well one easy answer for you. The VTEC enige is unbreakable and will rev higher than you think. When the VTEC kicks in you will get a bit more noise as the enige sucks more air but believe me as long as you keep ontop maintenance wise it will be the best buy.

Dec 15, 2009 | 1995 Honda Accord

1 Answer

Honda civic vtec 1995 - 1998 engine wiring diagram


Go to your local library and ask the Librarian to get you on-line to the Automotive Repair Reference Center, and then to the EBSCO database...you will find all of your wiring diagrams there.

Oct 07, 2009 | 1998 Honda Civic

1 Answer

I have 02 accord coupe and it says VTEC and automatic!! How do I know if the VTEC is connected!


ok lets break this down
Vtec= Variable Valve Timing and Lift Electronic Control

if you look on the the motor on the left side youll see 2 things the distributor and the vtec solenoid.. the vtec solenoidif the smaller of the 2 thats it m8 theres 2 wires running from it .. all vtec does is lift the cams on a high 3rd lobe :) rides in the middle of the 2 smaller cam's on a automatic it should pop around 5.200 rpms on a honda ecu thats not tuned.. also a exaust helps or a intake that produce a higher tone thats unmistakeable when vtec hits.. its a beautiful thing hit me up with any! honda stuff ive done swaps to my 92 prelude si 2.2l vtec and many more so i know a honda engine and wireing like theback of my hand

Aug 11, 2009 | 2002 Honda Accord

1 Answer

Connector for Speed Sensor on1996 Honda Accord Auto Trans.


If you are talking about just plugging into the speed sensor yes. A VTEC and NON-VTEC are one and the same.

Dec 13, 2008 | 1996 Honda Accord

2 Answers

Diagnostic codes


Please rate me solved...thanks!
DTC P1259: VTEC SYSTEM MALFUNCTION
1. Perform PCM reset procedure. See SELF-DIAGNOSTICS - INTRODUCTION article. Start engine
and run at 3000 RPM with no loads and transmission in Park or Neutral until radiator fan comes on. Road
test vehicle. Accelerate in 1st gear to an engine speed over 4000 RPM and hold that engine speed for at
least 2 seconds. If DTC P1259 is not indicated during first road test, repeat road test 2 more times. If DTC
P1259 is indicated, go to next step. If DTC P1259 is not indicated, problem is intermittent. System is
okay at this time. Check for poor connections or loose wires at VTEC solenoid valve connector and PCM.
See ENGINE PERFORMANCE WIRING DIAGRAMS article. Repair as necessary.
2. Turn ignition off. Disconnect VTEC pressure switch 2-pin connector. Check for continuity between
VTEC pressure switch terminals. If continuity exists, go to next step. If continuity does not exist, replace
VTEC pressure switch.
3. Turn ignition on. Measure voltage between ground and VTEC pressure switch harness connector terminal
No. 2 (Blue/Black wire). If about 12 volts exist, go to next step. If about 12 volts do not exist, check for
an open or short in Blue/Black wire between VTEC pressure switch and PCM 31-pin connector "C"
terminal No. 10. Repair as necessary. If wire is okay, substitute a known-good PCM and recheck. See
SUBSTITUTING PCM in SELF-DIAGNOSTICS - INTRODUCTION article. If symptom or problem
goes away, replace original PCM.
4. Measure voltage between VTEC pressure switch harness connector terminals. If battery voltage exists, go
to next step. If battery voltage does not exist, repair open in Brown/Black wire between VTEC pressure
switch and ground connector located on left side of engine, under throttle plate, between end of radiator
hose and cooling fan switch. See ENGINE PERFORMANCE WIRING DIAGRAMS article. If wire is
okay , substitute a known-good PCM and recheck. See SUBSTITUTING PCM in SELFDIAGNOSTICS
- INTRODUCTION article. If symptom or problem goes away, replace original PCM.
5. Turn ignition off. Disconnect VTEC solenoid valve connector. Measure resistance between ground and
VTEC solenoid valve connector. See ENGINE PERFORMANCE WIRING DIAGRAMS article. If
resistance is 14-30 ohms, go to next step. If resistance is not 14-30 ohms, replace VTEC solenoid valve.
6. Remove VTEC pressure switch and install Pressure Gauge Adaptor (07NAJ-P07010A) and A/T Low
Pressure Gauge (07406-0070300). Reinstall VTEC pressure switch into adaptor. Connect tachometer.
Start engine and with no loads and transmission in Park or Neutral until radiator fan comes on. Because
engine is running with no load, oil pressure must be checked within one minute. Check oil pressure at
engine speeds of 1000, 2000 and 3000 RPM. If oil pressure is less than 7 psi (48 kPa), go to next step. If
oil pressure is 7 psi (48 kPa) or more, check VTEC solenoid valve. See SYSTEM & COMPONENT
TESTING article.
7. Turn ignition off. Disconnect VTEC solenoid valve connector. Connect a fused jumper wire between
battery voltage and VTEC solenoid valve connector. Start engine and check oil pressure at 3000 RPM. If
oil pressure is more than 57 psi (393 kPa), go to next step. If oil pressure is 57 psi (393 kPa) or less,
check VTEC solenoid valve. See SYSTEM & COMPONENT TESTING article.
8. Ensure jumper wire is still connected to VTEC solenoid valve connector. Start engine and allow it to idle.
Set engine speed to more than 4000 RPM and measure voltage between ground and PCM 31-pin
connector "C" terminal No. 10 (Blue/Black wire). See ENGINE PERFORMANCE WIRING
DIAGRAMS article. If battery voltage exists, go to next step. If battery voltage does not exist, replace
VTEC pressure switch.
9. Turn ignition off and disconnect jumper wire. Check for continuity between VTEC solenoid valve
harness connector and PCM 25-pin connector "B" terminal No. 12 (Green/Yellow wire). See Fig. 2 . See
ENGINE PERFORMANCE WIRING DIAGRAMS article. If continuity exists, go to next step. If
continuity does not exist, repair open in Green/Yellow wire between VTEC solenoid valve connector and
PCM 25-pin connector "B" terminal No. 12.
10. Check for continuity between ground and VTEC solenoid valve connector. See ENGINE
PERFORMANCE WIRING DIAGRAMS article. If continuity exists, repair short in Green/Yellow
wire between VTEC solenoid valve connector and PCM 25-pin connector "B" terminal No. 12. If
continuity does not exist, substitute a known-good PCM and recheck. See SUBSTITUTING PCM in
SELF-DIAGNOSTICS - INTRODUCTION article. If symptom or problem goes away, replace original
PCM

Jun 21, 2008 | 1999 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

371 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...