Question about Jeep Cherokee

1 Answer

Torque specs on 1994 jeep cherokee lardeo 4.o liter main barrings and rod barrings

Posted by on

  • Anonymous Mar 15, 2014

    all torque spec on 2000 jeep 4.0 rods mains heads

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Main bearings at 80 foot lbs. rod bearings at 30 foot pounds. Make sure you check clearances with plastigage before you button it up and light it. Anything out of clearance may require an over or undersized bearing. Also, on final install, use a swipe of pre-lube on bearing faces but make sure the inside of the rods and caps as well as the backside of the bearing shells are absolutely clean and dry.

Posted on Oct 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Main bearings


97 Jeep Cherokee 4WD 4.0L I6
Connecting Rod Bearing Cap Torque - 33 lbs.-ft. (final torque)

Jul 04, 2013 | Jeep Cars & Trucks

1 Answer

Can i change tie rod ends on my 1994 jeep grand cherokee 2 wd without jacking it up?


You can do the tie rod ends on the ground, not sure about the other parts. The stabilizer bar has pressure on it most of the time.

Jul 01, 2012 | 1994 Jeep Grand Cherokee

1 Answer

Torque specs for rod & main brgs for 1994 ford f150, 300 6 cyl fuel inj engine


Main Bearing Cap Torque:
Torque in 2 steps: Step 1: torque to 35 Ft/Lbs Step 2: torque to 70 Ft/Lbs

The Rod Bearing Cap Torque: 45 Foot pounds (Final torque)

Was this what you needed...let me know by your rating of me...thanks!

Sep 17, 2011 | 1994 Ford F150 Styleside Supercab

1 Answer

Lifter torque specs? 1994 5.2l grand cherokee 4x4. need to know how tight to torque them.


I think you mean the rocker arms. 21 Ft/Lbs. If your talking about the "yoke retainers" then they get torqued to 200 INCH lbs.

Jun 26, 2011 | 1994 Jeep Grand Cherokee

1 Answer

I need torque spects for a 98 4.0 jeep on rods and mains.


  1. Tighten all main bearing bolts to 108 Nm (80 ft. lbs.) torque.
  2. Install the main bearing cap brace. Tighten nuts to 47 Nm (35 ft. lbs.) .




Connecting Rod Nuts 33 ft.lb

Dec 06, 2010 | 1998 Jeep Grand Cherokee

1 Answer

How hard is it to replace the rear maine oil seal on a 1994 Jeep Grand Cherokee 5.2 liter V8 4 wheel drive


There is some work involve in replacing rear main seal, seal sit in the rear of the engine block, the transmission will have to be remove, and the fly wheel to get to the rear main seal.If you have never removed a engine or transmission, it might be best to pay and have some one do it for you.

Sep 08, 2010 | 1994 Jeep Grand Cherokee

1 Answer

Needing engine bolt torque specifications for a 2006 Ford Five Hundred with 3.0 liter engine. This will need to include rod and mains torque and torque rotation.


stage 1 tighten to 30 ft pounds
stage 2 tighten 90 degrees
stage 3 loosen one full turn
stage 4 tighten to 30 ft pounds
stage 5 tighten 90 degrees
stage 6 tighten 90 degrees
this is per mitchell on demand courtesy of ford specs on the lft and right head.
for some reason there are no torque specs on mitchell for connecting rods and mains.

Sep 15, 2009 | 2006 Ford Five Hundred

1 Answer

Need torque specs for 1.3 liter motor,connecting rod bearing and main bearings.


MAIN BEARING TORQUE IS 36 -41 FT LBS. ROD BEARING TORQUE IS 24 -26 FT LBS

Jul 07, 2009 | 1995 Suzuki Esteem

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...