Question about 2004 Ford Ranger

3 Answers

No brake lights in my 2004 ranger - 2004 Ford Ranger

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 195 Answers

Check bulbs, check fuse, if both checks good the suspect brake switch where the brake pedal is under the drivers side dash right behind the brake pedal. Replace.

Posted on Oct 11, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

The easy fix would be a bad break light switch.
The tough fix would be a bad wiring issue

Posted on Oct 11, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 8,516 Answers

Please see my tip at http://www.fixya.com/cars/r6053280-lights_out_lights_not_out_bulbs_ok . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Posted on Oct 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Ford Ranger - My break lights and directional signals are not working. My head and tail lights do work. Any advice on what I should check?


Most common is a bad signal light/multifunction switch failure. The brake lights are wired into the signal light circuit within the switch

Apr 09, 2016 | 2004 Ford Ranger

1 Answer

Brake lights do not work


Replace the bulb - filaments could be faulty.
check wiring on back side of the socket
check brake switch is supply power to lights when brake pedal depressed

Apr 04, 2015 | 2004 Ford Ranger

1 Answer

Grease in rear wheel hub


The rear brake cylinders are located inside the hub with the brake shoes on drum brakes...(common in 2004 Rangers on rear only) The brake cylinders are a "wear item" with seals...we used to rebuild the cylinder with new seals...best today to buy new brake cylinders to replace the leakey ones...You will need to bleed all 4 brake line/wheel connections after the replacement. Hope this helps.

Oct 14, 2013 | 2004 Ford Ranger

1 Answer

Break light came on and brakes became spongy


Your brake master cylinder could be low,if it goes too low,then air will get in and become spongy.

Nov 17, 2012 | 2004 Ford Ranger

1 Answer

When I squeeze down on the brake pedal (or let up on it for that matter) I get a low pitch sound like a squeeky bellows. My dealer says it is a faulty brake booster and that it is a very expensive fix. He...


Eventually the leak will become bad enough that it will either cause the check engine light to come on and/or cause Driveability problems. I would put it on the list of things to do and replace it when you can.

Aug 09, 2012 | 2004 Ford Ranger Super

1 Answer

2004 ford ranger when brakes applied makes sound like a pump running ABS and BRAKE indicator lights are on.


the sound u hear is the abs pump.for the lights to be on and hear the pump running, there is a problem, take it to shop before brakes fail completely

Dec 14, 2010 | 2004 Ford Ranger

1 Answer

2004 FORD RANGER BREAK LIGHT NOT WORKING


Either the bulbs are burnt (not likely) or the brake lite switch on the brake pedal needs to be adjusted or replaced.Before we go into opens in the circuit try these two ideas.

Apr 19, 2010 | 2004 Ford Ranger

1 Answer

Brake drum


2004 ranger has 2 different size drums 9" and 10" (the difference is actually less than an inch). It sounds as if you've got the wrong drums.

Sep 06, 2009 | 2004 Ford Ranger

1 Answer

2006 Ford Ranger. Rear passenger side tail light


Bad earth connection.Clean or replce wire.

Jun 18, 2009 | 2004 Ford Ranger

2 Answers

2004 Ford Ranger. My brake lights won't work.


Are your hazard lights and/or reverse lights working? I can't remember which ties in with your brake lights but one of them do.

Apr 02, 2009 | 2004 Ford Ranger

Not finding what you are looking for?
2004 Ford Ranger Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...