Question about 2003 Dodge Caravan

1 Answer

How to change a map light bulb on a 2003 dodge caravan

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Go to this web page:

It has pics and step by step instructions!

Posted on Oct 31, 2010


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 47 Answers

SOURCE: the map light in our 2002 dodge caravan burned out

If it's like mine, the clear lens "rocks" on two pins to turn the light on and off. Two integrated clips on the white lens attach to the pins.

On the outboard side of the rocker switch/lens is a small slot for a screwdriver slot. You can see it if you use a really bright flashlight (LED or Surefire style.) CAREFULLY slip a blade in there and pry the lens off the pins that it rocks on. There is a pin on each side, and the lens has a clip on each side.

There is a plastic positioning "tongue" on the forward part of the lens that slides out as you ease the lens out of position. So don't just yank that critter out.

The guys at Auto Zone said the goofy bulb under there is propriety to Chrysler, so you'll have to get a new one from a dealer, apparently.

Mine was just scorched a bit, and turning it slightly had it working again. Then I carefully put the lens back in.

I would post a pic that would make this entirely self-explanatory, but they won't let me. Bulb is #578 and i got it at advance auto parts for $4. auto zone doesn't stock it

Posted on Sep 22, 2009

Testimonial: "I will try it and hopfull get some light!!thank you!!"

  • 412 Answers

SOURCE: Changing Headlight bulb

remove the two 8mm screws on top of rad support and remove headlamp assembly..unplug connector and unlock bulb holder

Posted on May 30, 2009

  • 1986 Answers

SOURCE: changing the headlight bulb in 2003 dodge grand

1) open the hood.
2) Carefully remove the three screws holding the headlight assembly in place.
3) Carefully slide the headlight assembly out. At this point you can replace the headlight bulb, turn signal bulb, or the entire headlight assembly. To replace the headlight bulb turn the collar holding the bulb in counter clockwise. Pull the bulb out of the headlight assembly. Replace the bulb. Insert the bulb into the headlight assembly insert the collar and turn clockwise until it locks. (Do not touchglass with your fingers or it will cause the bulbs to catastrophically fail - clean with alcohol pad if you touch the glass)
4) Carefully insert the headlight assembly back into place.
5) Replace the three screws removed in step 2 being careful not to over tighten.

Posted on Oct 30, 2009

  • 11896 Answers

SOURCE: Replacement of map/reading light bulb 2006 Dodge

Pop the cover off with flat-head screwdriver, then pull the bulb straight out and push new one in.

Posted on May 19, 2010

Testimonial: "Hey, thanks. It was just that never doing that operation, I wasn't sure where the tabs were and was afraid it might crack the lens. Your solution was right on. Took about 1 minute and saved what Quick Lube place was charging to do the replacement plus the cost of the bulbs! Thanks again."

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the map sensor on a 2003 dodge caravan

There should be a 3/8" rubber hose attached to a nipple somewhere on the intake manifold, find that hose follow it back, it attaches to the MAP sensor.

Aug 29, 2014 | 2003 Dodge Caravan

1 Answer

2003 dodge caravan. Driverside park lamp and tail light don't work. Turn signals work. Brake light works.

replace bulb, park and tail is same bulb, if bulb is good just clean re install, you will actually see if the filament is broken or burned

Mar 16, 2014 | 2003 Dodge Caravan

2 Answers

Replacement of map/reading light bulb 2006 Dodge Grand Caravan

Pop the cover off with flat-head screwdriver, then pull the bulb straight out and push new one in.

May 19, 2010 | 2006 Dodge Grand Caravan

1 Answer


change the map sensor than and clear the code and see if it will come back

Apr 21, 2010 | 2003 Chrysler PT Cruiser

1 Answer

Driver side brake light won't work. Bulbs are new. 2003 Grand Caravan

possible the bulb socket is bad and not makeing connection or ground.check the fuses for blown fuse controlling the right side brake light. use a testing light to test the socket and fuses.

Mar 29, 2010 | 2003 Dodge Grand Caravan AWD

1 Answer

How do i change a headlight bulb on dodge caravan

unplug the wiring, unscrew the outter housing counterclockwise, remove bulb

Feb 04, 2010 | 2003 Dodge Caravan

1 Answer

Changing Headlight bulb

remove the two 8mm screws on top of rad support and remove headlamp assembly..unplug connector and unlock bulb holder

May 28, 2009 | 2003 Dodge Caravan

1 Answer

Left Brake light out.

Check in fuse/relay box under hood on driver side for fuse blown. Map is on underside of cover.

Apr 27, 2009 | 1999 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

516 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides