Question about Chevrolet Blazer

Open Question

What is the front axle gear ratio on a 1988 k5 blazer

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 180 Answers

SOURCE: 1986 K5 Blazer front hub/axle problem

3 bolts from the back, axle nut and take the caliper off pretty easy.

Posted on Jan 21, 2009

jeffbvegas1
  • 520 Answers

SOURCE: how to install new races without a press? 1988 K5

These can be driven out with a long round punch and 4 lb sledge.Use punch that will bite nicely on the thin side of the race and strike in different spots to avoid cocking and hanging which requires harder strikes

Posted on Sep 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

85 k5 Chevy Blazer 4 wheel drive leaking oil by the Tires how do you replace the seals


If you are not an experienced mechanic, I would take it to a reputable shop. You have to completely dis-assemble the front steering knuckle to get to the seals, it is usually a good idea to replace your front axle u-joints while you are in there, and check on your upper and lower ball joints, as all of this has to come apart to get to your axle seals.

Jul 17, 2014 | Cars & Trucks

1 Answer

What is the rear wheel bearing gear ratio for a 2001 Chevy Blazer 4WD - 2 door?


I think you mean the rear end ratio. there is no gear ratio for the wheel bearing. If you look at the factory sticker on the drivers door, there will be an "axle code". write that down and then look here for the ratio.

http://www.drivetrain.com/parts_catalog/ring_and_pinions/what_gear_ratio_do_i_have_in_my_gm_or_chevrolet.html

Jan 05, 2011 | 2001 Chevrolet Blazer

1 Answer

I need to know the firing order on a 1988 k5 blazer 5.7 liter i mesed it up and cant figure it out


the firing order is stamped on the side of the intake manifold - usually around the throttle body.

Jan 27, 2010 | 1988 Chevrolet Blazer

1 Answer

Need front differential gear ratio? 99 Blazer, v6


3.42, 3.08 and 3.73 ratios were used.

You need to get under the vehicle and check the tag which has the diff ratio printed on it. The ratios front and back will be the same but look at both tags.

Sean


Dec 18, 2009 | 1999 Chevrolet Blazer

1 Answer

Have a 321 gear ratio bought another 321 gear ratio rear axle at yunk yard looks different it has spring in the cover where the gear are Will it work have a 5.2 engine


One axle may have an open differential and the other a locked. If they both have the same gear ratio and the housing is identical you shouldn't have any problems. If you had posi and the new one doesn't, then you'll obviously lose that but it won't effect anything else.

Oct 22, 2009 | 1988 Dodge Ramcharger

2 Answers

How to install new races without a press? 1988 K5 Blazer 4x4 front.


you use a large brass drift punch and a ball pen hammer, tap in with hammer to set, then drive home with brass drift punch, any sears store will have the brass punch, about $15.00

Sep 27, 2009 | 1988 Chevrolet Blazer

2 Answers

Where is the horn on a 1988 k5 blazer


horn is usually in fender at frt,u may have 1 in each fender.

Jun 30, 2009 | 1988 Chevrolet Blazer

1 Answer

I was just wondering if my 2001 chevy blazer has a rear lockin differental??


They were an option but you can find out by looking in your glove box's GM RPO Codes. It's the sicker on the inside of the glove box with numbers and letter.
Here are some listing on the gear ratio you may have,
U4: Rear Axle, 3.08 Ratio             U5: Rear Axle, 3.23 Ratio U6: Rear Axle, 3.42 Ratio 
If it is a GU the G stands for the rear Locking Differential.
Good luck and hope this helps.

May 04, 2009 | 2001 Chevrolet Blazer

1 Answer

1986 K5 Blazer front hub/axle problem


3 bolts from the back, axle nut and take the caliper off pretty easy.

Jan 20, 2009 | 1986 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...