Question about 2006 Pontiac G6

Open Question

Where is the bcm on the 2007 pontiac g6 - 2006 Pontiac G6

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Changing blinker on 2007 Pontiac G6

It's a monster pain to get to them, but it's doable. Once you empty the trunk, you'll see 4 black knobs - approx 1.5 inches in diameter. You'll need to remove all of these (they just unscrew, but they are plastic, so be careful not to strip the threading) in order to access the rear light assembly.

They're in there snug, but once you find the appropriate sized socket (I wish I could recall well enough to tell you what size, b/c I remember that it WAS an odd size), you'll have to remove all 3 bolts and then push the whole assembly out from inside the trunk.

Once the assembly is out, you will see the rear of the sockets, which simply push and turn to get the lamps out of. As long as you have everything open, I suggest changing ALL of the lamps (brake, tail, and turn signal) on BOTH sides, since the lamp life for all of these is about the same and it's such a pain to get to them in the first place.



Posted on Apr 13, 2009

emissionwiz
  • 75814 Answers

SOURCE: transmission fluid for 2007 pontiac G6 GT

This car does not have a auto trans dipstick, the level can only be checked by the dealer, this is a growing trend that started with most German cars, the filter is inside the trans pan and only needs changing every 60,000 miles.

Posted on Jan 06, 2009

  • 114 Answers

SOURCE: 2007 Pontiac G6 winter tires

Yes you need sensors in any wheel you put on...what is a locket?

Posted on Sep 14, 2009

omaromid
  • 332 Answers

SOURCE: How to clean O2 sensor on a 2007 Pontiac G6?

O2 sensor are located before and after Catalytic Converter ( exhaust system of your car). If you car's engine is 4 cyl you have 2 O2 sensors and if you car's engine is 6 cyl then you have 4 O2 sensors ( for each bank, 2 for left bank and 2 for right bank). Hope it helps and comment if you need more advice. Please don't forget to rate the answer it helps with my ratings, thanks!

Posted on Apr 28, 2010

  • 1 Answer

SOURCE: coolant temp sensor location for 2007 pontiac g6

where is the thermal coolant sensor located on a 2007 g7 4 cylinder

Posted on Sep 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove bcm in 2007 pontiac g6?


Why ? If you replace the BCM it will need to be programmed . Dealer !!
This vehicle's body control module (BCM) has a bussed electrical center integrated into the housing. Body control relays and fuses are installed directly on the BCM, which simplifies wiring and junction blocks on the vehicle. The body control system consists of the BCM and its associated controls. Battery positive voltage is provided to the BCM from IBCM BATT 1 fuse and the IBCM BATT 2 fuse in the underhood fuse block. The module grounds are wired to ground G201, G203 and G305. The BCM is wired to the GMLAN High speed serial data buss, and the GMLAN Low speed serial data buss, as well as discrete input and output terminals to control the functions of the vehicle's body .
Trying to save you some agravation an wasted time an money . For a do it yourselfer , this is nothing you should be messing with ! You don't have the training to be messing with the BCM .
A new body control module (BCM) must be programmed with the proper regular production option (RPO) configurations. The BCM stores the information regarding the vehicle options and if the BCM is not properly configured with the correct RPO codes the BCM will not control all of the features properly. The Tech 2 software will automatically prompt you with the various RPOs available for the vehicle. Ensure that the following conditions exist in order to prepare for BCM programming:
This entire procedure has been reviewed before starting
The battery is fully charged.
A CANdi module is installed between the vehicle and the scan tool.
The ignition switch is in the ON position.
The data link connector (DLC) is accessible.
All disconnected modules and devices are reconnected before programming.

Oct 23, 2016 | 2007 Pontiac G6

1 Answer

I need to know where I can download a 2007 Pontiac g6 owners manual......


Pontiac Vehicle Owner's Manuals ' Pontiac

www.pontiac.com/owners/owner_resources/manuals.html
PontiacFind owner's manuals for past Pontiac models, including the G8, G6, Solstice, Torrent and Vibe.

[PDF]2007 Pontiac G6 Owners Manual - GM Extended Warranty

www.vadengmpp.com/owners-manual/pontiac/2007-Pontiac-G6.pdf
PONTIAC, the PONTIAC Emblem, and the name. G6 are registered trademarks of General. Motors Corporation. This manual includes the latest information at the.

Nov 29, 2015 | Pontiac Cars & Trucks

1 Answer

2007 pontiac g6 transmission fluid specs


On a 4 Cyl 2007 Pontiac G6, the transmission uses Dexron VI.

Jun 11, 2014 | 2007 Pontiac G6

1 Answer

Hello I need help locating the fuse/relay for my power windows on my 2006 Pontiac G6. My windows are stuck in the down position.


The 2007 Pontiac G6 engine compartment fuse block is located on the driver's side of the engine compartment, near the battery. The wiring circuits in Pontiac G6 are protected from short circuits by a combination of fuses, circuit breakers and fusible links. This greatly reduces the chance of damage caused by electrical problems. Below diagram and table shows 2007 Pontiac G6 Engine Compartment Fuse Panel, Relay and the Circuit Protected.
pontiac-g6-engine-compartment-fuse-panel_thumb.png The fuse is in location 50

Nov 25, 2010 | 2006 Pontiac G6

1 Answer

2007 G6 no start. turn key on nothing happens not even a click. pulling code U0141. BCM. How do I fix it?


Please see my tip at http://www.fixya.com/cars/r6222268-engine_doesnt_crank_turn_over . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Oct 02, 2010 | 2006 Pontiac G6

1 Answer

I have a 2007 pontiac g6, 4 door. i changed the


Check the wiring on the headlight. You may have a damaged wire or bad ground.

Dec 30, 2009 | 2007 Pontiac G6 GT Convertible

1 Answer

2007 Pontiac G6 winter tires


Yes you need sensors in any wheel you put on...what is a locket?

Oct 21, 2008 | 2007 Pontiac G6 GT Convertible

Not finding what you are looking for?
2006 Pontiac G6 Logo

Related Topics:

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...