Question about 2001 Chevrolet Blazer

1 Answer

My 2003 Chevy S10 blazers check engine light has been on for about 2 years. I brought it to a mechanic who said that it was a pipe leaking and that I did not need to worry about it. Recently though will driving on the highway my car will make a jerking motion and then the engine light will flash at me until I slow down to about 45 mph. Any idea what this could mean?

Posted by on

  • caitlyn_flip Oct 18, 2010

    I honestly don't even know what the catalytic converter is or what it would sound like rittileing or when it would do that.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,428 Answers

YOUR MECHANIC WAS WRONG EXHUST SYSTEM PROBLEMS ARE VAREY BAD DOSE YOUR CATALYTIC CONVERTER MAKE A RITTILEING SOUND IF SO ITS NO GOOD AND WILL CLOG THESE VEHICLES NEED TO MAINTAIN BACK PRESSURE IN EXHUSET SYSTEM TO MAKE ENGINE SYSTEMS FUNCITION CORRECTLY YOU SHOULD HAVE CHECKED BY ANOTHER MECHANIC BEFORE ITS TO LATE AFTER 2 YEARS THERE IS MORE WRONG WITH IT GOOD LUCK

Posted on Oct 14, 2010

  • caitlyn_flip Oct 18, 2010

    I honestly don't know what a catalytic converter is or what a rittileing sound would sound like or when it would do it.

  • JOHN LAPIER Oct 18, 2010

    I WISH I COULD SEE IT I COULD TELL YOU A LOT MORE THE BEST THING YOU CAN DO IS TAKE IT TO AN AUTO PARTS STORE A LOT OF THEM WILL HOOK IT UP TO ASCANNER FOR FREE YOU NEED TO KNOW WHAT THE CODE OR CODES ARE IF THE MIL LIGHT IS ON ACODE SET IT OFF TRY ADVENCED AUTO I KNOW THEY WILL DO THIS

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 Chevy blazer with a 4.3 vortec motor it has a small leaking head gasket how long can I drive it until I have the money to fix it.


Troubleshooting a Blown Head Gasket (GM 4.3L, 5.0L, 5.7L)

troubleshootmyvehicle.com > GM > 4.3L, 5.0L, 5.7L
Mar 28, 2011 - There are so many ways to test for a blown head gasket on your 4.3L, 5.0L, 5.7L GM van (or mini-van, pick up, SUV) that it can get confusing.

Chevy Blazer Coolant Leak (Intake Manifold) - YouTube

? 4:33
https://www.youtube.com/watch?v=SC4VXdt5wiE
Oct 9, 2013 - Uploaded by eyetotheworld
I have localized a coolant leak on my 2003 Chevy Blazer to thegasket of the intake ... Turns out that this is common among this particular engine both in the v6 & v8 sizes. ... The guy has been generous to detail his projects. ... 98 S10 Vortec V6 4.3 IntakeGasket Replacement Part 1 of 5 - Duration: 18:17. by ...

Chevy 4.3l v6 oil leak issue 2001 Xtreme Blazer - YouTube

? 6:11
https://www.youtube.com/watch?v=Y8Ogd5voIYs
Nov 12, 2011 - Uploaded by smiatacz
This darn little engine just keeps going. ... I have a 2003 chevy blazer and the oil cooler line from the oil filter to ... I have a 95 Chevy s10 v6 vortec 2wd that is slightly dripping oil out of agasket ... I'm having same problem 2001 Chevy Blazer 4x4 (not xtreme) not sure if those same bolts are missing on mine.

Dec 28, 2015 | Cars & Trucks

2 Answers

How can I get a free chilton repair manuel for a 2002 Chevy S10 Blazer


Chilton and Haynes books are never free. You may get lucky and find a used one for a decent price. Your best bet may be to go online at "alldatadiy.com". This will cost about $30 a year but it is very vehicle specific. You input the year,make ,model, engine and transmission and they provide detailed repair instructions complete with diagrams.

Sep 14, 2014 | 2002 Chevrolet Blazer

1 Answer

On my 93 chevy s10 4x4 blazer, my instrument panel worked before new motor was put in, after having the new engine put in, my fuel gauge, oil pressure, voltmeter, rpm, and my temp gauge all quit worki


Look for a missing ground strap from the engine to the body or frame. Remember the engine sits on rubber mounts so that ground strap is essential.

Feb 21, 2014 | Cars & Trucks

2 Answers

My chevy s10 blazer will idle good but once i start to drive it begin to sputter real bad


Is the check engine light on ?
Have you checked the fuel pressure yet ?

Dec 07, 2012 | Cars & Trucks

1 Answer

Chevy s10 1989 revs high and low and high and low. also stalls when driving


Could be lots of things. Start with vacuum leaks,stuck egr valve,throttle position sensor etc. Is there any check engine light on?

Jun 09, 2010 | 1989 Chevrolet S-10 Blazer

2 Answers

89 chevy s10 blazer puff smoke out tailpipe when 1st started


A puff of smoke when you start up indicates worn valve seals.That's why all your work didn't fix the problem and it doesn't show a code. It's a pain in the --- job that requires some specialized tools so I guess it depends on how bad it bugs you,if oyu want to fix it.

Jul 13, 2009 | 1989 Chevrolet S-10 Blazer

1 Answer

Bent A-Arm on a 1991 Chevy S10 Blazer...repair$???


I would guess $500 - $1500 to do this job depending on how much damage was done when the arm was bent.

"SMALL OIL AND TRANSMISSION LEAK AND THE RADIATOR LEAKS OUT SLOWLY." -- the radiator leak could get bad enough to require repair.

I think $400 obo is an okay price, can't get much lower for a vehicle that will get you to the store and back.

May 27, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

Check Engine Light On - 2003 Chevy Blazer


hi the engine check is letting u know that a component on your engine has failed the computer stores this information is stored in the computer memory u need to go to a garage and say u want the fault codes checked they have a scanner to do this it could be a faulty part or just a bad connection hope it helps your mechanic should know this he must be a bush mechanic good luc mate

Dec 20, 2008 | 2003 Chevrolet Blazer

1 Answer

Chevy 2003 bumper extension


Sorry, i searched all over the web.. didn't found a thing... but try to go to a mechanic shop and buy a manual

Jun 20, 2008 | 2003 Chevrolet Blazer

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...