Question about 1995 Nissan Pickup

Open Question

I have a 1995 nissan pickup with a ka24e. I just put a new timing chain and timing chain guides in it put it all back together now there is no oil pressure. the oil pump seems to be working just fine. i pulled it out poured oil in it and turned the shaft and it pumped the oil out. next i pulled the oil pan to see if the pick up was pluged, i just found broken pieces of the plastic chain guide in the bottom of the oil pan. im not sure what to do next. If u can help me that would be much appreciated.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: timing chain guide

does any one know were to get the pitchers to change the timing chain for free on the internet

Posted on Nov 05, 2008

Ad
  • 599 Answers

SOURCE: Nissan KA24E rattle at start up

ah the venerable napz motor extra coil extra plugs and a weak oiling system check oil filter bypass for coked stuck return spring...how many miles on motor? if crank bearings are failing no oil can get to top (warm metal things swell and make it less noticable)

Posted on Jan 14, 2009

  • 43 Answers

SOURCE: Oil not circulating ? 1999 Nissan Altima DOHC,

Well, from the oil pump it goes into your oil filter so the lines going from the pump into the filter could be clogged. check that and see. Also on most imports I have found that they have to be primed after the oil pump has been replaced. Buy a oil pressure gauge and hook it up. Disconnect your fuel and spark delivery and then just crank over your motor to make sure you have good pressure. It takes up to 30 seconds to build on some cars. hope that helps.

Posted on Jul 21, 2009

  • 7353 Answers

SOURCE: My husband has two KA24E engines, and he asked my

the library may have what you need, but the best solution is to have a factory service manual for the vehicle you are working on. If he knows engines, these aren't any different. its self explanatory how it comes apart and back together. any machine shop will have any spec he needs. He will need specific measuring tools. if you are asking these kind of questions, its revealing that he does not have the tools to do that. He would be better off to take both engines to a machine shop and let them decide what is good or bad. There is nothing "free," you can either pay someone who knows what they are doing now, or later, small mistakes can be big bucks later.

Posted on Oct 13, 2009

  • 179 Answers

SOURCE: 1995 nissan pickup 4 cylinder timing chain - 256k miles

Most definetly yes. It should run you around 500 dollars. If you timing belt breaks it will destroy your valves and head.

Posted on Dec 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 97 nissan hardbody 2.4 ka24e eng with 258890miles on it got a new oil pump timing chain & head job the spring is red what color will increase the oil pressure


Nissan has fitted the spring to give the correct oil pressure to the crank and cam bearings, you can damage the white metal crank shaft bearings by increasing the oil pressure , fit the standard spring.

Aug 06, 2015 | Nissan Cars & Trucks

1 Answer

Why won't my 1996 nissan pickup start after changing the oil pump


Hi Bryan, I'm Al the owner of Big As Auto Repair

Bryan, If you changed the oil pump on your 1996 Nissan Pickup and it involved removing the timing chain then I would say you did not get the timing set back up correctly and hopefully you do not have the interference engine because if you do you possibly could have bent the valves in the head. This can be costly. Here's what I need to know. Did you remove the timing chain to do the oil pump? If you did send the engine size to my website below through "Contact Us" and I'll see if your engine is a interference engine. We may be able to work together and get you out of this mess. Have an awesome day Bryan! Auto Repair

Feb 16, 2015 | 1996 Nissan Pickup

1 Answer

I need to know how to line up all the timing marks on 97 Nissan pickup with 2.4l ka24e 12valve engine I'm doing a head job & putting new timing chain oil pump I have never done one before on this type of...


they are pretty much all the same line up your 2 camshaft marks with your crankshaft mark they should all facing the same direction ,if you look on ebay I will bet your problem is solved there , good luck

Sep 21, 2014 | Nissan Cars & Trucks

1 Answer

I want to know how to line up all of the timing marks on 2.4l Nissan truck with ka24e sovc vin code s how do I know when the cam & crank gears & chain is in time & how to line up the oil pump with the...


Ok on cams and on big engine crank they all have either dots or arrows alls u do is line up the small ones on cams ok but if u moved big crank then u must set crank back to dead top center and u do this but pulling out the number one spark plug and putting a screw drive in whole and tap lifter then game some one turn crack until u fill the lifter at the highest point then that's top dead centrr

Sep 21, 2014 | Cars & Trucks

1 Answer

Need to get a real vacuum diagram of a 1994 D21 KA24E engine, 5speed, with air and power steering


Have you looked on u tube some guys put up good videos on there . Or you could try and google a manual on line .

May 09, 2017 | Nissan Pickup Cars & Trucks

1 Answer

While replacing oil pan gasket, found a large amount of plastic pieces in the oil pan. now the engine is knocking.


The plastic pieces are your guide for your timing chain. This is a common problem on that year truck. I just replaced mine yesterday. Now today I get to mess with the distributor timing...how fun. I bought a ka24e timing chain kit from ebay $42.00 shipped. it comes with everything you need. An auto parts store wanted to charge me over $200.00 for the same type of kit. Well I'm sure this isn't really the news that you wanted to hear. Good luck, and I hope this helped.

Aug 20, 2011 | 1994 Nissan Pickup

2 Answers

I have a 94 Nissan pickup it has a 2.4 KA24E. I had to replce the timing chain and sprocket. I went by the book and it will not start.? I move the distributor back and forth and it try's to fire but wont....


What up? I got a 85 nissan 720 4x4 2.4, with Weber,never had a issue with my timing chain,got a remanufactured Jasper motor, now have 55,000 miles on it,truck has 343,000 on speedo,had it since 93.Here's a link on a repair guide for your timing chain. Repair Guides Engine Mechanical Timing Chain And Tensioner AutoZone com

Jul 03, 2017 | 1994 Nissan King Cab

2 Answers

Should you replace the timing chain in a 1995 2wd pickup and if so how often


timing chains in most cases never need be repalced for the life of the engine, timing belts on the other hand last about 60,000-100,000 miles.

Oct 16, 2009 | 1995 Nissan Pickup

Not finding what you are looking for?
1995 Nissan Pickup Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...