Question about Toyota Corolla

Open Question

What's the size of a spindle nut on a 05 Toyota Corolla?

Posted by on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 285 Answers

SOURCE: 1994 K1500 brake rotor replacement

if you replace the rotor you shouldnt have to take the spindle nut off,if you are talkin about the lug nuts then they are 7/8" standard or 22mm metric,and the torque on those are 140 ft lbs.the rotor might just be rusted on,a good whack with a hammer after the caliper and caliper bracket have been removed should get it loose for you,hope this helps

Posted on Sep 09, 2009

  • 2976 Answers

SOURCE: tyre for 2007 Toyota Corolla

The "Best" size, is what the factory installs originally. The car is engineered to work a specific way. There are many other sizes that will fit, each has it's own reasons for being designed the way they are.

Posted on Oct 20, 2009

  • 185 Answers

SOURCE: what is the socket size for the drive axle nut in

30 mm

Posted on Oct 24, 2009

michigan man
  • 3533 Answers

SOURCE: what size spindle nut size on wheel bearing of

i do not know but call your local Ford or Mercury dealership and ask for the parts department and they be able to tell you the size it is

Posted on Dec 17, 2009

  • 14036 Answers

SOURCE: What is the rear spindle nut size on a 20004

most GM new cars has 35 mm.

Posted on Dec 22, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Remove rotor from 1989 Toyota Corolla

I have never seen a rotor that needs the axle nut removed do you have a picture and have you removed the caliper and caliper bracket it may be rusted enough to cause it to look that way

May 30, 2015 | 1989 Toyota Corolla 2 Door

1 Answer

My toyota corolla manifold nut is striipping,now the car is missing its idleling

If the stripped thread is on the inlet manifold, this can cause the miss fire.
You will need to fit a new thread called a helicoil or insert which will restore it to the same bolt size, there is not usually enough room to tap it out to the next size.
and you will need a new manifold gasket

Jun 10, 2011 | 1996 Toyota Corolla

1 Answer

Having trouble removing the front wheel. removed lug nuts, but don't know if or how to remove spindle nut

once the lug nuts are off the wheel should come off, if not bang on the tire with a heavy hammer it is stuck on the hub (RUST).

Aug 28, 2010 | 2006 Toyota Corolla

1 Answer

What is the nut size at the end of a cv joint of a 2004 toyota corolla s

I am assuming you are talking about the axle nut?

most are a 28mm

Aug 28, 2010 | 2004 Toyota Corolla

1 Answer

1992 Toyota Corolla CV Joint

You can pick up an entire re manufactured axle assembly at your local auto parts store. In order to replace the assembly you will need to disconnect the tie rod end and the ball joint. Remove the spindle nut. Push the axle stub out of the hub. Now with a suitable container under the axle to catch spilled fluid pry the axle from the transmission housing. Install is the reverse of removal. For more detailed instructions and diagrams go to vehicle repair guides.

Oct 29, 2009 | 1992 Toyota Corolla

1 Answer

How to take out and reinstall new axle on 1996 toyota corolla,

1. Jack up and support car on jack stand. Make sure to chock wheels and or lock the parking brake on.
2. Remove wheel
3. Remove cotter key, castle lock and nut at center of rotor that attaches the axle. - If you lack and impact gun to remove this - it is easier to loosen this nut with all of the wheels on the ground.
4. Remove outer tie rod from spindle, Tap out with hammer. Should not require much force.
5. Remove the single bolt from the lower ball joint and separate from spindle.
6. Pull axle out of spindle and remove from transmission. This may require you to drive this out with a hammer and punch ( I use a brass punch), make sure not to damage threads if you intend to reuse the axle.

To install reverse the procedure. Make sure to replace any cotter key removed with new ones during install.

Torque specs you need are

Ball Joint to Spindle = 91 ftlbs
Tie rod to spindle = 36 ftlbs
Drive axle hub nut = 166 ftlbs

May 06, 2009 | 1996 Toyota Corolla

2 Answers

Toyota corolla

Remove wheel, brake cliper, cliper mounting bracket, brake pads and rotor.
Remove tie rod end and strut from spindle,
Remove large drive axle nut from center of hub by removing cotter pin and nut cover
Remove the ball joints 2 nuts and 1 bolt
Pull assy. lose from drive axle.
Take complete Hub assy with new bearing to an automotive machine shop and have them disassemble hub and replace bearing.
Reverse steps to reinstall

Jun 30, 2008 | 1994 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides