Question about 2004 Toyota ECHO

Open Question

2004 Toyota Echo. On a smog check, P0441-P0442-and P0446 were detected. Could one problem be causing all three to malfunction? All are the Evaporative Emission Control System. An estimate to repair would be appreciated.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jpstuhr
  • 49 Answers

SOURCE: Troubleshooting code: P0442

Here ya go

6b631d6.jpg

Posted on Feb 11, 2009

Ad
freetek
  • 5568 Answers

SOURCE: Evaporative emission system - small leak/no BB flow condition

Although I recommend you buy a Haynes service manual for your Dodge, I think you will find the canister attached to the firewall or one of the fender wells. Most of them look a lot like an overgrown spam can and it will have two connections on it.

Posted on Mar 06, 2009

  • 12650 Answers

SOURCE: Evaporative Emission System codes

check ur gas cap for tight and proper seal that is the most common problem for the the evap codes if cap is good check fuel and vent lines for damage or leaks from gas cap under vehicle up to engine compartment

Posted on Oct 18, 2009

  • 7353 Answers

SOURCE: Code P0441 and P0446. What does it mean?

Both codes are with the EVAP SYSTEM, there are numerous items it could be. A repair shop that does Toyotas or the delaler would be the best to check it out for you. Its not anything that will leave you walking or disable the car.

Posted on Nov 13, 2009

  • 67 Answers

SOURCE: Hi, I got 3 codes:

Do a smoke test...

Posted on Mar 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have DTC Codes; P0441, P0442, and P0446 EVAP codes. Have had too many things replaced to name and still have codes. Originally, only had one code P0442, after the unsuccessful removal of severalevap


code p 0442 refers to evaporative emission(EVAP) system---small leak detected====causes--hose connections--intake leak--EVAP canister--EVAP canister purge valve
it also refers to --large leak detected====causes fuel cap loose, off---mechanical fault--hose connections---EVAP pressure sensor
code p 0441 refers to EVAP system--incorrect flow detected====causes hoses, intake leak-- EVAP canister purge valve
code p 0446 refers to EVAP system, vent control---circuit malfunction===causes--wiring---EVAP canister purge valve----ECM
if you can remember when the problem started ( after refueling) it may be that the cap is not fitted correctly
it could that in the fixing process , the wiring has not been correctly installed or the problem is the canister purge valve needs attention

Feb 06, 2017 | Cars & Trucks

1 Answer

How to fix whatever caused the codes P0441, P0442,P0446


Check and make sure your gas cap is screwed on tightly. Then, check the vacuum lines are attached correctly and not leaking. I would bet one of the hoses came off or you have a hole in one or more. The hoses split with age. Start with these, before changing sensors or solenoids.
http://www.obd-codes.com/p0446
http://www.obd-codes.com/p0441
http://www.obd-codes.com/p0442

Feb 21, 2016 | 2003 Lexus LS 430

1 Answer

Hello there,my 2001 echo is lighting up trouble codes p0440 p0441 p0446; how and where should i start?


code p0440 refers to evaporative emission (EVAP) system--malfunction=== causes --hose connections --intake leak--EVAP canister purge valve
code po441 refers to EVAP --incorrect flow detected==causes the same as for po440
code po446 refers to EVAP system vent control --circuit malfunction===causes --wiring---EVAP can purge valve--ECM
generally I would replace the purge valve as it is common to all codes

Feb 03, 2014 | Cars & Trucks

1 Answer

Toyota echo won't start code 440 441 446


Error Code: P0440
Fault Location:
Evaporative Emission (EVAP) System - Malfunction
Possible Cause:
Malfunction Indicator Lamp (MIL) active.
Soution:
Check Evaporative Emission (EVAP) System Sealing.
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve .
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve .

Error Code: P0441
Fault Location:
Evaporative Emission (EVAP) System - Incorrect Flow Detected
Possible Solutions:
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve .
Perform Output Test.
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve .
Check Evaporative Emission (EVAP) Canister.
Perform Basic Setting.
Check Pipes between Tank Breathing and Throttle Body.

Error Code: P0446
Fault Location:
Evaporative Emission (EVAP) System, Vent Control - Circuit Malfunction
Possible Cause:
Wiring harness.
Evaporative emission (EVAP) canister purge valve.
Engine control module (ECM).

Feb 25, 2013 | 2002 Toyota ECHO

1 Answer

Did not pass smog need help with error codes p0441,p0442,p0446


Some test should be about $25 and take about ten minutes once the car is up on the lift, after all it is just a diagnostic test to see if there any leaks. The car should be on the lift to check the EVAP piping all the way back to the tank. It is unlikely that the charcoal canister will need changing, they generally last longer than the car as they rarely wear out. The charcoal canister and the whole EVAP system merely absorbs fuel vapours rising of the fuel in the tank. When your engine is warmed up and doing more than 2,500 revs the EVAP purge and vent valves open to allow outside air to be drawn in through the canister to carry the small amount of trapped fuel vapour into the engine to be consumed as part of the normal fuel air mix. The computer normally commands the EVAP system to open and close the purge/vent valves check as part of an inbuilt leak detection protocol and has seen an anomaly, possibly the vent valve not closing properly. Once the nature of the leak is diagnosed it is matter of fixing it and it should not be an expensive or time consuming job. Take the car to other mechanics and get their opinion and guesstimates. Put it like this "would you smoke test my EVAP, fix the leak and clear the diagnostic trouble codes from my computer for $200 including taxes?" If the answer is no then ask how close they can get to this price.

Mar 01, 2017 | Lexus ES 300 Cars & Trucks

1 Answer

Code p0440 code p0441 code p0446on toy echo 2000 what is the diagnosis?


P0440 Evaporative Emission Control System Malfunction P0441 Evaporative Emission Control System Incorrect Purge Flow P0446 Evaporative Emission Control System Vent Control Circuit Malfunction
  • Remove and reinstall the gas cap, clear the code, and drive for a day and see if the codes come back.
  • Inspect the EVAP system for cuts/holes in tubes/hoses
  • Inspect for damaged or disconnected hoses around the Evap purge solenoid
  • Check and/or replace the sensor
  • Check and/or replace the purge valve
  • Have a professional use a smoke machine to detect leaks

Aug 19, 2011 | 2004 Toyota ECHO

1 Answer

Have codes P0441, P0442, and P0446. What could be the problem?


this obd2 trouble code table can help you understand the meaning of code.
and for p0441, you can try:
Repair damaged EVAP lines or canister.

Repair open or short in voltage feed circuit to Purge Solenoid.

Repair open in PCM purge command circuit.

Replace purge Solenoid.

Replace vacuum switch.

Repair restriction in Evap line or canister or soleniod.

Repair resistance in purge connector.

Replace PCM.

for p0442

Remove and reinstall the gas cap, clear the codes, and drive for a day and see if the codes come back.

Otherwise, replace the gas cap, or

Inspect the EVAP system for cuts/holes in tubes/hoses.

Aug 15, 2011 | 2003 Toyota ECHO

1 Answer

Have OBD codes P2A00, P0441, P0442, P0446 on my 2003 Highlander. Selling the car in a few months. Does this really need to be repaired before trade-in? Can I just erase the codes?


NOPE CANT ERASE CODES UNTIL THE PROBLEM IS FIXED OR THE SERVICE ENGINE LIGHT SOON WILL STAY ON. CODE PO441 - EVAPORATIVE EMISSION EVAP SYSTEM INCORRECT FLOW DETECTED.CHECK INTAKE VACUUM HOSE CONNECTIONS AT THE EVAP CANISTER PURGE VALVE.IF ALL IS GOOD.THE EVAP CANISTER PURGE VALVE COULD BE BAD. CODE PO 442 - EVAPORATIVE EMISSION EVAP SYSTEM SMALL LEAK DETECTED. EVAPORATIVE EMISSION SYSTEM LARGE LEAK DETECTED FUEL CAP LOOSE OR OFF MISSING. CODE PO 446 - EVAPORATIVE EMISSION EVAP SYSTEM VENT CONTROL CIRCUIT MALFUNCTION.

May 21, 2011 | Toyota Highlander Cars & Trucks

2 Answers

P0440, P0441, P0446


where is Evap Emission Control System Purge Flow fault

Jul 02, 2009 | 2000 Toyota Celica

1 Answer

2001 corolla chack engine light on.


P0440= Evap Control Sys Malfunction
P0441= Evap Control Sys Purge Flow Fault
P0446= Evap Control Sys Vent Ckt Malfunction

Mar 30, 2009 | 2001 Toyota Corolla

Not finding what you are looking for?
2004 Toyota ECHO Logo

Related Topics:

721 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...