Question about 2002 Mazda Protege

2 Answers

Code p0445 evap. emission control system leak,large

TITLE 57708563102 DI. BODY 4DOOR SEDAN

Posted by on

  • 3 more comments 
  • Anonymous May 04, 2009

    hi i have a bmw 318i 98 and i have the check engine light on for this codes p1140 p0440 p0445 i want to know if somebody can help me withs codes pls... i really need helps

  • Anonymous Mar 15, 2014

    mazda millienia 1999 2.5l evaporative emission system leak(large)

  • Anonymous Mar 15, 2014

    have large leak on 2000 S80 2.3 evap emission control system, where is it and how to fix

  • Anonymous Mar 15, 2014

    where is it located 0n 2000 volvo s80 2.3 evap emission control system

  • Anonymous Mar 25, 2014

    Emission Control Leak (Large)

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

That means you are driving whit the fuel cap loose or missing or you have a vapor leak on the vapor lines coming from the fuel tank to the engine, have your car inspect for leaks, but make sure to ask your mechanic if he has the smog machine to aply smog to the evaporative system that,s the easiest way to fin a leak,

Posted on May 31, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I HAVE FORD F 150 EGINE 4.6 L THE CODE P0455

Posted on Apr 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0445 on my 2003 hyundai tiburon Gt evap


This code's description is P0455 Evap Emission System- Large Leak. Usually ,arge leak means you drove or still driving your vehicle with loose or missing gas cap. Check your gas cap if it is tight. Even if that is the case , tightening it might not turn the check engine light off. So you have to erase the code with a scanner. If your gas cap is in place and tight then you probably have a leak in the emission system which includes numerous parts. So it should be inspected by a proffesional.

Apr 15, 2015 | Hyundai Cars & Trucks

2 Answers

How to repair engine code po442 2009 mazda 5?


Check the purge solenoid under the hood common problem in mazda 5 6 cx7.

Jul 11, 2014 | Mazda Cars & Trucks

2 Answers

Code says evaporator purge solenoid


Which code specifically? Do not assume you need a new solenoid. Our recommendation will depend on the specific code and some troubleshooting results. I usually recommend checking over all the EVAP vacuum lines and the gas cap too whenever there is a purge valve code. Check the vacuum lines at the cannister in the left rear bumper. I will paste info on the purge solenoid below.

P0440 Evaporative emission (EVAP) system - malfunction

Possible causes: Hose connection(s), intake leak, EVAP canister purge valve


P0441 Evaporative emission (EVAP) system - incorrect flow detected

Possible causes: Hose connection(s), intake leak, EVAP canister purge valve


P0442 Evaporative emission (EVAP) system - small leak detected

Possible causes: Hose connection(s), intake leak, EVAP canister, EVAP canister purge valve


P0443 Evaporative emission (EVAP) canister purge valve - circuit malfunction

Possible causes: Wiring, EVAP canister purge valve, ECM


P0444 Evaporative emission (EVAP) canister purge valve -open circuit

Possible causes: Wiring open circuit, EVAP canister purge valve, ECM


P0445 Evaporative emission (EVAP) canister purge valve -short circuit

Possible causes: Wiring short circuit, EVAP canister purge valve, ECM


P0450 Evaporative emission (EVAP) pressure sensor - circuit malfunction

Possible causes: Wiring, EVAP pressure sensor, ECM


P0455 Evaporative emission (EVAP) system - large leak detected

Possible causes: Hose connection(s), intake leak, EVAP canister, EVAP canister purge valve


P0456 Evaporative emission system - very small leak detected

Possible causes: Mechanical fault, hose connection(s), EVAP pressure "sensor


P0457 Evaporative emission system - leak detected (fuel cap loose/off)

Possible causes: Mechanical fault, hose connection(s), EVAP pressure sensor


P0458 Evaporative emission system, purge control valve -circuit low

Possible causes: Wiring short to earth, EVAP valve


P0459 Evaporative emission system, purge control valve -circuit high
Possible causes: Wiring short to positive, EVAP valve


Evaporative Emission Purge Solenoid

Description & Operation
The duty cycle EVAP canister purge solenoid (DCP) regulates the rate of vapor flow from the EVAP canister to the intake manifold. The Powertrain Control Module (PCM) operates the solenoid.
During the cold start warm-up period and the hot start time delay, the PCM does not energize the solenoid. When de-energized, no vapors are purged. The PCM de-energizes the solenoid during open loop operation.
The engine enters closed loop operation after it reaches a specified temperature and the time delay ends. During closed loop operation, the PCM cycles (energizes and de-energizes) the solenoid 5 or 10 times per second, depending upon operating conditions. The PCM varies the vapor flow rate by changing solenoid pulse width. Pulse width is the amount of time that the solenoid is energized. The PCM adjusts solenoid pulse width based on engine operating condition.
Removal & Installation
The duty cycle evaporative (EVAP) canister purge solenoid is located in the engine compartment near the brake master cylinder.

  1. Disconnect electrical connector at solenoid.
  2. Disconnect vacuum lines at solenoid.
  3. Lift solenoid slot from mounting bracket for Removal & Installation.

To Install:
  1. Position solenoid slot to mounting bracket.
  2. Connect vacuum lines to solenoid. Be sure vacuum lines are firmly connected and not leaking or damaged. If leaking, a Diagnostic Trouble Code (DTC) may be set with certain emission packages.
  3. Connect electrical connector to solenoid.
Purge solenoid location:

jturcotte_65.gif
EVAP cannister location:
jturcotte_66.gif

Nov 05, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Code, p0442 p0445


P0442 - Evaporative Emission Control System Leak Detected (small leak)

This indicates a fuel vapor leak in the EVAP control system. It means a very small leak has been detected. In fact, the leak can be from a hole as small as 0.04" in diameter. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.

Symptoms: You likely won't notice any drivability problems.

Causes: A code P0442 most likely means one or more of the following has happened:
* A loose or improperly affixed gas cap
* A non-conforming gas cap (i.e. not factory/original brand)
* A small leak/hole in a fuel vapor hose/tube
* Other small leak in EVAP system
* Faulty vent o-ring seal

Possible Solutions: with a P0442, the most common repair is to:
* Remove and reinstall the gas cap, clear the codes, and drive for a day and see if the codes come back.
* Otherwise, replace the gas cap, or
* Inspect the EVAP system for cuts/holes in tubes/hoses



P0445 - Evaporative Emission Control System Purge Control Valve Circuit Shorted.
Possible Solutions: with a P0445, the most common repair is to:
* Bad or loss contact wires
* Check harnesses, replace it


Hope helps (remember to rate this).

Nov 05, 2010 | 1999 Jeep Cherokee

2 Answers

Will a faulty gas cap make the check engine light come on?


yes, it will usually set a code P0445

P0455 Evaporative emission (EVAP) system - large leak detected



Oct 24, 2010 | 2002 Pontiac Bonneville

1 Answer

Po455


P0455 - Evaporative Emission Control System Leak Detected (no purge flow or large leak)

This indicates a fuel vapor leak or lack of purge flow in the EVAP control system. It means a large leak has been detected. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.

Symptoms: You likely won't notice any drivability problems.

Causes: A code p0455 most likely means one or more of the following has happened:
* A loose or improperly affixed gas cap
* A non-conforming gas cap (i.e. not factory/original brand)
* Other leak or damaged piece in EVAP system

Possible Solutions: With a p0455, the most common repair is to:
* Remove and reinstall the gas cap, clear the codes, and drive for a day and see if the codes come back.
* Otherwise, replace the gas cap, and/or
* Inspect the EVAP system for cuts/holes in tubes/hoses (you may hear a vacuum noise or smell fuel), repair if necessary

Hope helps (remember to rate and comment this).

Oct 02, 2010 | 2007 Honda Accord Sedan

1 Answer

I scann my car 2005 corollathe code came p0441and p0445 what does it mean engine light blinking


p0441: Evaporative Emission Control System Incorrect Purge Flow;
A code P0441 could mean one or more of the following has happened:

Bad vacuum switch
  • Broken or damaged EVAP line or canister
  • Open in PCM purge command circuit
  • Open or short in Voltage feed circuit to Purge Solenoid
  • Faulty purge solenoid
  • Restriction in EVAP solenoid, line or canister
  • Corrosion or resistance in purge connector
  • Bad PCM

p0445: Evaporative Emission Control System Purge Control Valve Circuit Shorted
(This also came up already above)

Nov 30, 2009 | 2005 Toyota Corolla

1 Answer

I have a 2002 Ford Taurus, and an engine sign showed up. However, I pulled out the code which is P0442. what is the problem, how much would that cost me and when do I need to fix it, can I wait for the...


P0442 code relating to the EVAP (Evaporative Emission System).a small emissions leak. also check the gas cap .Try cleaning the seals first and then try putting a little vaseline on the seals before getting a new gas cap. -------------
Code P0442-Evaporative emission control system. Canister Purge system failed the monitor test indicating a large leak (over 0.040”). Enabling conditions: Engine running after a 6 to 8 hour engine off period called a cold soak. The test runs when engine load is between 15 to 45% and inlet air temperature between 40 and 130°F. Blocking Action: This code can block the following monitors: Fuel Control, O2 monitor, Catalyst Monitor, misfire monitor. Testing: Check the purge hoses for leaks, leaking vapor management valve or loose gas cap.

This simply indicates that there was no flow from the evap system when the purge valve was energized. This could be cause of a few different reasons. First, check for leaks by visually looking at all evap lines for cranks rips or any tears. Basically, anywhere that fuel vapors can escape.
----------- Here is the test that will smoke the system for leaks with a smoke machine.

Evaporative Emission System Leak Test

SPECIAL TOOL(S)

CAUTION: The evaporative emission system must not be pressurized to more than 3.48 kPa (14 inches H2O)or damage to the evaporative emission system may occur.
  1. Connect the Evaporative Emission System Leak Tester to the evaporative emission test port.
  2. Close the canister vent solenoid.
  3. Pressurize the evaporative emission system to 3.48 kPa (14 inches H2O) .
  4. Monitor the system for two minutes . The system fails the leak test if the pressure falls below 2.0 kPa (8 inches H2O) .
  5. Repair any leaks as necessary.
  6. Repeat the leak test until the system remains above 2.0 kPa (8 inches H2O) after the two-minute test period.
---------- get it repaired ASAP because if you drive the car in same condition the emisson system can get damaged.and code will be p0445 ,now the code is p0442 its for leak in the emisson system. ---------------- This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya.

Oct 15, 2009 | 2002 Ford Taurus

2 Answers

P0441 EVAP Control System Incorrect Purge Flow


Error Code: P0441
Fault Location:
Evaporative Emission (EVAP) System - Incorrect Flow Detected
Possible Cause:
Malfunction Indicator Lamp (MIL) active.
Evaporative Emission (EVAP) Canister Purge Regulator Valve faulty/jammed.
Evaporative Emission (EVAP) Canister Purge Solenoid Valve faulty/jammed.
Evaporative Emission (EVAP) Canister Sealing faulty.
Pipes between Tank Breathing and Throttle Body leaky/blocked.
Hose connection(s).
Intake leak.
Possible Solutions:
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve .
Perform Output Test.
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve.
Check Evaporative Emission (EVAP) Canister.
Perform Basic Setting.
Check Pipes between Tank Breathing and Throttle Body.
VSV connector near air filter box disconnected.

Jun 15, 2009 | 1996 Chevrolet Monte Carlo

1 Answer

TENGO UNA DODGE CARAVAN SPORT 2001 TENGO LOS SIGUIENTES CODIGOS P0442 P0445 P0446 P1684 Y EL PROBLEMA ES QUE MI VAN NO ARRANCA SEGUN EL ESCANER Y LO QUE ME INDICA EN EL TABLERO SON SOLO ESTOS CODIGOS


P0442 refers to a small leak in the Evaporative Emissions System(It purges fuel tank vapors into the engine to be burned rather than vented into the atmosphere). From time to time the PCM pressurizes this system to check its integrity. If it senses a small leak, then it sets this code. 

Is your gas cap on tight? Recheck it.

The evaporative emission system is probed by applying vacuum to the EVAP system and monitoring for a vacuum decay.
 The engine control module (ECM) monitors the vacuum level through the fuel tank pressure sensor signal.

The EVAP canister purge valve and the EVAP vent solenoid are turned on at the nick of time, allowing the engine to **** up a small vacuum on the entire EVAP system.

 After the requisite vacuum level has been obtained, the EVAP canister purge valve is switched OFF, locking the system entirely.

 If sufficient vacuum level cannot be derived, a large leak is indicated. This can be caused by the following conditions 


The P1684 code simply means that the battery has been disconneted within the last 50 starts.

Your Car has a Lot of Problems, but some not at all expensive to fix

Apr 24, 2009 | 2002 Chrysler Sebring

Not finding what you are looking for?
2002 Mazda Protege Logo

3,850 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...