Question about Toyota RAV4
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: toyota rav 4
I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram
Posted on Nov 30, 2008
brown to the tail lights. yellow to left turn signal. green to right turn signal. this is a basic 3 wire hook-up i use all the time w/4wire connectors for all trailers. white wire is not used. ground is established when you hook to the ball.
to find the correct wire to splice to, use a testor (has a clip to the bare wire, and a sharp point to the truck frame). using a needle, push it through a wire to rear light harness. turn on the turn signal. check if the connection is the blinker, testing until you have the blinker wire. the tail lights can be attached to the license plate wire. brakes and blinkers use same wire, so brake lights will work whenever the turn signal is attached.
to be sure everything is working right, have a second person go inside the truck and work the signals, brakes and lights one at a time while you are at the back of the trailer telling what to do.
Posted on Dec 07, 2008
The socket should be beside the tow hitch. If not you will need to connect a socket and patch it into the wiring of the rear lights. Here is the wiring diagram http://www.western-towing.co.uk/acatalog/Trailer_wiring.gif
Posted on Feb 10, 2009
Get a tester light the type with an alligator clip and a sharp point.
Check each wire for your brake lights,blinkers etc.
i.e. With the blinker light on find the correct wire and splice into it with the corresponding light on the trailer. ( DO NOT CUT THE TRUCKS WIRE)
Remove the covering and twist the plug wires around it and tape or shrink wrap if you can.
Hope this helps
Posted on Apr 19, 2009
Tips for a great answer:
Sep 24, 2013 | Cars & Trucks
Mar 31, 2013 | 2007 Toyota FJ Cruiser
Apr 16, 2012 | Cars & Trucks
Sep 15, 2011 | 1987 Dodge Caravan
May 07, 2011 | 1994 Toyota Pickup
Jan 06, 2011 | Ford F-350 Cars & Trucks
Nov 16, 2009 | 1996 Chevrolet S-10 Pickup
May 09, 2009 | 1999 Ford Explorer
Dec 10, 2008 | 1999 Toyota Tacoma PreRunner
28 people viewed this question
Usually answered in minutes!