I suggest performing a throttle body cleaning.
Remove the black air filter housing and hose going to
engine. Grab some rubber gloves,carburater cleaner,and
rags. Open throttle plate , spray some cleaner onto a rag
then clean plate and housing. DO NOT SPRAY CLEANER
INTO THROTTLE BODY BECAUSE ELECTRICAL SENSORS
MAY GET DAMAGED. Make sure throttle plate moves freely
and does not stick. Re- install housing and hose.
Test drive and confirm repair. Good luck.
I’m happy to assist further over the phone at https://www.6ya.com/expert/richard_9a19ee73dfa4686a
262 views
Usually answered in minutes!
×