Question about Mazda B2300

2 Answers

The starter turns over but the truck wont run

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check power to coil also check fuses and fuse links. If timming is off it will crank but not start.

Posted on Oct 11, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

Check for fuel pressure on the fuel rail
Check for spark to the plugs.

Posted on Oct 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Runs and starts fine,then,for no reason wont start. the battery is brand new.


Could be the starter is going out. When it heats up everything expands and if a starters bendix is going out, it wont get enough power to turn the starter motor. Helps to have year make and model

Apr 15, 2017 | Cars & Trucks

1 Answer

My 2000 dodge wont start battery is good checked fuses plugs fuel pump is getting gas it will run for a few days then stop


might want to check the starter. the parts stores can test it once its removed. does it turn over or it wont run? people confuse this. if it wont start that is a starting problem. if it wont run that is a fuel or spark problem. to total different thing. if it turns over the starter is good. not running after it turns it can be a number of things. crank sensor or cam sensor. bad ground or many other things. need more information what it is doing?

Mar 03, 2015 | Dodge Cars & Trucks

1 Answer

I just replaced my starter on my 99 gmc yukon and it was fine for 10 minutes then it made this weired noise and when I went to turn the truck off the engine kept going and then smoke came from the starter...


Sounds to me like your starter did not disengage and was running the whole time when vehicle running. From your key to the starter is a "trigger wire" which activates the starter when you turn the key. If that wire end touches other wires on the starter then the solenoid will stay on keeping the starter running which will then over heat and burn out the starter. If vehicle was running fine before the starter replacement there is really nothing else it could be.

Dec 03, 2013 | Cars & Trucks

1 Answer

Starts but wont stay running


it will not run because the key has a chip in it,and is a alarm box that runs it.

Dec 16, 2012 | 1996 Pontiac Grand Prix

1 Answer

Bulldozer quit running now it wont turn over or do anything


check your ground on your starter/starter relay/ground from battery, possibly even a bad start key/switch. Are all your "kill" switches engaged (clutch pedal/brake/seat/door, etc). Since I dont know the model of your bulldozer I am just suggesting the basics. Good Luck

Jun 07, 2012 | 1996 Chevrolet K1500

1 Answer

Starter is running but wont engage flywheel


check the starter gear, maybe it didnt actuate.

May 10, 2012 | 2001 Buick LeSabre

1 Answer

2004 trailblazer 4.2 newer battery wont start when turning the key it does not even try to turn over when turning the key all the lights on the cluster go out and then when you let off the key they...


By your description, it sounds like the starter motor is not working proper. You can tap on the starter with a hammer sometimes to at least make the starter work. Make sure the truck wont run over you,but hold the key in the start position while tapping starter with a hammer. If the starter works ,then the starter needs to be replaced. If it doesnt work, then you will need to remove starter and have it tested before you replace it.. Let me know if that helps

Mar 27, 2011 | 2004 Chevrolet TrailBlazer

1 Answer

WOnt run over - battery good - can turn it over but jumping the starter


if the battery is good and you jump the starter she should run otherwise you may have a sensor issue, try to get a hold of a code reader and see if any codes have popped up..

Aug 02, 2008 | 1998 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...