Question about 2002 Jeep Liberty

1 Answer

Drivers side, reverse light won't work. passsenger side is okay looking for a rear tail light pin-out diagram

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 8,826 Answers

Backup is violet/black

drivers side, reverse light won't work. passsenger - 263ae87.gif Ground is black/white

drivers side, reverse light won't work. passsenger - ae8afcc.gif

ae8afcc.gif

Posted on Oct 11, 2010

Testimonial: "just what i needed, Thank You. Now I can fix the stock assembly and add 2 halogens below the bumper. "

  • Ron Durham Oct 12, 2010

    Take a 12 volt light tester an back track the wiring,

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to wire trailer plug


hope this helps


6 pin socket

w1s.jpg

w1p.jpg

6 pin plug


7 pin socket

w2s.jpg

w2p.jpg

7 pin plug


5 pin socket

w3s.jpg

w3p.jpg

5 pin plug



7 pin socket

w4s.jpg

w4p.jpg

7 pin plug



7 pin socket

w5s.jpg

w5p.jpg

7 pin plug



7 pin socket

w6.jpg

7 pin plug





12 pin socket

w7.jpg

12 pin plug



small 6 pin round plug & socket

1 tail, clearance - brown

2 left hand turn - yellow

3 right hand turn - green

4 stop - red

5 electric brakes - blue

6 earth - white



small 7 pin round plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

roundskt.jpg round socket

large 5 pin round plug & socket

2 left hand turn - yellow

3 earth - white

5 right hand turn - green

6 stop - red

7 tail, clearance, side markers - brown



large 7 pin round plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown



7 pin round heavy duty plug & socket

1 earth - white

2 left hand rear , clearance and marker - black

3 left hand turn - yellow

4 stop - red

5 right hand turn - green

6 right hand rear , clearance and marker - brown

7 reverse/auxilary - blue



7 pin flat plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown


7_flatsocket.jpg flat socket

12 pin flat plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

8 battery supply - orange

9 auxiliaries - pink

10 earth - white

11 rear fog lamp - grey

12 auxiliaries - violet


Feb 02, 2013 | 2004 Toyota RAV4

1 Answer

98 Chevy Tahoe, drivers side rear tail light assembly wont work, brake / turn signal. Replaced entire assembly, it worked for about 3 days then stopped working again. I need to get this fixed before I get...


I've got the same problem on 98 GMC Sierra.

I'm an electrical engineer, I checked the electrical diagrams and verified that there is no problem in the rear lamp assembly or wiring. With the light assembly unplugged, I can actually watch the blinker and brake signals operate with a voltmeter. The Tail light works OK.

It simply won't provide enough current to light the bulbs.

I'm afraid that it's melted one of a pair of normally closed contacts inside the blinker switch that feed the brake and turn separately on each side.

Sep 04, 2011 | 1998 Chevrolet Tahoe

1 Answer

Looking for a tail light wiring diagram for 2004 Dodge Ram 1500. Needing to find which wire is used for reverse light


low beam kigth out on driver side replaced balb an still dont work this is om my 2004 dodge ram 1500

Dec 08, 2010 | 2004 Dodge Ram

1 Answer

Fitting single towbar electrics, Hyundai Coupe 2.0 2004 (Tiburon)


Hi There. Im not sure where you are but this is the sequence for the UK< Hope it helps.
here are the 7 cable locations and pin numbers.
Pin 1 Yellow L/H Direction Indicator
Pin 2 Blue Rear Fog Lamps
Pin 3 White Earth Return
Pin 4 Green R/H Direction Indicator
Pin 5 Brown R/H Tail & No, Plate Light
Pin 6 Red Stop Lamps
Pin 7 Black L/H Tail & No, Plate Lights

I found the easiest way to locate the correct wires in the loom is to turn on the lights required and use a circuit tester and splice into the main loom where you have enough wire to play with. Try not to cut the loom as it only causes more problems with bad connections and joins.(
Good Luck

Apr 16, 2010 | 2003 Hyundai Tiburon

2 Answers

2003 Toyota Highlander.The brake light on the passenger side is not working. New bulbs, driver side and center brake lights work. Tail lights left and right work. ???


Replace the right rear brake lamp. The bulb possible use two filaments one for brake and tail light. One burnt out filament in one bulb.

Nov 30, 2009 | 2003 Toyota Highlander

1 Answer

DRIVER SIDE TAIL LIGHT BRAKE LIGHT OR TURN SIGNAL DONT WORK BUT P


if you have the diagram,have a look for a ground problem.ground the assembly to the side that works.the other thing to do if you have a test light is check that there is 12 volts on off on the signal on one bulb pin and steady 12v on the run and stop lights.that means there is an open ground......

Jun 13, 2009 | 1991 Chevrolet Suburban

1 Answer

Fitting a towbar for a caravan with 13pin europlug


black socket, black 7 core wire
pin 1 yellow left indicator
pin 2 blue, rear fog light
pin 3 white earth
pin 4 green right indicator
pin 5 brown right side/tail light
pin 6 red brake lights
pin 7 black left side/tail light

Grey socket grey 7 core wiring
pin 1 yellow, reverse
pin 2 blue, supplementary feed (ignition)
pin 3 white, earth
pin 4 green live feed (battery +)
pin 5 brown not connected
pin 6 red supplementary feed (ignition)
Pin 7 black earth

On the discovery there is a purpose made plug behind the panel on the drivers side rear, behind the rear lamp
i think the relay you have bought is for lamp failure you just need a normal 4 pin 30 amp relay.
Good luck Davelee

Mar 19, 2009 | 1997 Land Rover Discovery

1 Answer

Brake light wiring reversed?


hi go back to bulb and make sure the bulb you have fitted is for indicator? this has only one element and has only one centre contact for power also check the side pins on the body of bulb they should be opposite one another and on same level as you look on side however here in uk some of these bulbs are the same as above but for the locating pins as described above the pins are on same level but not opposite each other so if you try fitting should not be able to fit easily bayonet suggest you check the other side rear light bulbs one at atime to ensure correct type are what you have fitted stop and tail light bulbs have two elements one for brake and one for tail light these locating pins are oposite each other but not on same level offset to ensure the elements are on correct circuit when fitted hope you understand ?

Nov 02, 2008 | 1995 Ford Contour

1 Answer

Brake lights do not work (3rd brakelight does) changed bulbs checked fuse


Problem could be the Brake Light Control Module. That's about the only other thing other than a bad wire somewhere if the bulbs and fuses are good. 91 Accord has 2. One on each side in the smaller of the 2 rear tail light lenses. In order to change the module you have to remove the smaller of the rear tail lights. Drivers side is 5 pin. Passenger side is 6 pin.

Jul 20, 2008 | 1991 Honda Accord

Not finding what you are looking for?
2002 Jeep Liberty Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...