Question about 1987 Ford Bronco II

2 Answers

How I determine if the enginge is locked? - 1987 Ford Bronco II

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,051 Answers

HELLO THERE
The easiest way is to remove all of the spark plugs and make sure to mark each wire and where they went to
Next on the lowest pulley whre the belt is take a socket that fits it and a long breaker bar and put it on and try to bar over the engine if you cant move it try it the other way if still you cannot move it then you could presume that it is frozen or the gear train is locked up mayby by the starter or some where in the trans area but i dout that

Posted on Oct 11, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

Will the starter spin it ?
If you don't have a starter and battery to spin it, then put it in neutral, and put a socket and breaker bar on the bolt on the harmonic balancer and try to turn the engine.
It turns easier if you take out the spark plugs

Posted on Oct 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 09 caravan will not shift out of low speed into the next gear ,the enginge runs like a top but it simply stopped shifting.


Your transmission is in 'limp in' mode. The control module has determined that there is a problem, and will not allow the transmission to shift - it allows just enough mobility to get it to a repair shop. You can check the fluid level, but if that's OK you'll have to have it diagnosed to determine what the problem is, and how much it's going to cost to fix it. It could be something relatively minor or it could require a rebuild. But continuing to drive it will aggravate the problem, and could require replacement.

Jan 01, 2017 | Cars & Trucks

1 Answer

How do u know if ur enginge is locked up


With the vehicle in park and the emergency brake set, put a wrench on the crankshaft pulley bolt (front, bottom of engine in the center of the big pulley that belts goes around) and try to turn it clockwise. If engine is locked up you will not be able to turn crankshaft.

Apr 16, 2014 | Kia Sedona Cars & Trucks

1 Answer

HAD BAD FREEZ NO ANTI FREEZ IN ENGINE...HAD WATER THOUGH,,,NOW WATER GOOING TO ENGINGE...OIL WHITE MILKY LOOKING


You have an internal water leak somewhere.

Question for you; did the vehichle run hot prior to this ?

If your answer is no,then i suggest that you try a GOOD block/head sealer.

If you answered yes to the question then you need to determine where the crack is (ie. head or block).
If the water seepage in your block/head IS NOT too bad, then the sealer will work in this case also.

If you try the block/head sealer and it doesn't work then MAJOR repair's are necessary.

Feb 13, 2011 | Dodge Durango Cars & Trucks

1 Answer

My jeep wrangler 95 can't be start, because check enginge line can't ON.when i'm remove general cable from batery, end wait until 2 hour, plug cable on batery. check enginge light is ON and enginge can...


i have the same prob with mine. if u trun the key to the on and leave it sit there the ck engine light will come on in a few minutes then it will start. I think it is the computer but i have not got it check yet but i have to do that every morning and then it works fine as long as it stays worm.

Jun 08, 2010 | 1995 Jeep Wrangler

1 Answer

My 1995 dodge 1/2ton 4x4 5,2 v8 the check enginge


Have you had the code read? This could be a lot of things but if you have the code it will probably give the answer to the problem. Go to any local auto parts store and ask them if they will read the code for you and post it here and we can move on.

Mar 15, 2010 | 1996 Dodge Ram 1500 Club Cab

1 Answer

2000 Grand Am, the Check Enginge light along with


ABS Light could mean a bearing. But my lights were, ABS L/S, Service engine soon and another right next to it R/S.

Mar 12, 2010 | 2000 Pontiac Grand Am GT

1 Answer

No heat, enginge died, antifreeze leaked, won't start again


car overheated.after it cools off try to start it again, if it dont start...check oil and see if it lookd like water is in it(milky)....if the oil looks like its milky or sludgy ..you may have a cracked head...thanks

Jan 04, 2010 | 1997 Ford Taurus

2 Answers

P0302 cylinder 2 misfire detected enginge revs


P0302-Cylinder 2 Misfire Detected How do I track down the problem and fix?

Dec 10, 2009 | 2001 Hyundai Elantra

1 Answer

1995 Mark VIII-enginge goes on,idle goes down,enginge goes off


change the idle air control valve, this controls idling

Dec 20, 2008 | 1995 Lincoln Mark VIII

1 Answer

Have power but no enginge start


You may need to step on the brake pedal and be sure the transmission is in park while starting the engine,

You need to post more details on what is happening and what you are doing when the engine won't turn over.

Nov 12, 2008 | 1996 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...