Question about Geo Tracker

Open Question

How to change front wheel bearing on Geo tracker 4x4 1992

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 72 Answers

SOURCE: 1995 4x4 geo tracker front wheel bearings

first you remove the wheel then the break caliper then remove the locking hubs just remember to lay out the parts in order a special tool is called for but this job can be done without it you have to use a small cold chisel and a hammer to tap the large nut counter clockwise to remove, you can then remove the outer bearing and the rotor and hub assembly look on the back side reomve the bearing seal and inner bearing be sure to pack your new bearings with grease before you reassemble . takes less than an hour.

Posted on May 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repack front manual hub bearings on 1993 tracker 4X4


every fact on topic , hubs here.

it's not the locking hubs its the wheel bearings in its own hub.
http://www.fixkick.com/

dangerous condition that... very much so.

May 24, 2014 | 1993 Geo Tracker

1 Answer

1991 geo tracker wheel bearing grease


old post
and common, prob.
it can be just the wear markets on the front pads yelling at you
"change me" soon for i die.
or the 4wd axle ends lockers are rusty and clicking. (common)

both the hubs and bearings are here.
http://www.fixkick.com/hubs/FW_BEARINGS.html

you can in fact remove just the auto/manual locking hubs
and drive, to prove they are good or bad. (easy huh)?

Apr 16, 2014 | 1991 Geo Tracker

1 Answer

I have a 97 geo tracker 4 door auto matic in 2 wheel drive it works great but when I put it into 4 wheel drive it acts like it is lunging like something may be bent


if it is in 4 low it will lug also in 4 high if excessive u-joints could be dry and binding or just needs to be ran in 4 wheel for a few miles to lube everything up bearings gears front axle etc... be sure transfer case is full and differentials are full also you need to have same size tires all the way around.

Jan 02, 2014 | 1997 Geo Tracker 2 Door

1 Answer

Front bearings and seals on 95 geo tracker replacement


Click here to see how to replace front wheel bearing.Here are the bearings.

Dec 16, 2012 | Cars & Trucks

1 Answer

1995 4x4 geo tracker front wheel bearings


first you remove the wheel then the break caliper then remove the locking hubs just remember to lay out the parts in order a special tool is called for but this job can be done without it you have to use a small cold chisel and a hammer to tap the large nut counter clockwise to remove, you can then remove the outer bearing and the rotor and hub assembly look on the back side reomve the bearing seal and inner bearing be sure to pack your new bearings with grease before you reassemble . takes less than an hour.

May 05, 2010 | 1995 Geo Tracker

2 Answers

Heat coming from1997 geo tracker & front tires


sounds like you have a brake claiper piston not return causing the brake pads to drag, jack up both wheels and spin to see if you can feel or hear drag, give the wheel a hard spin and see if it stops right away or seems to spin freely, could be the drag of the pads on the rotor, or wheel bearings need repack or even as much as brake residual fluid pressure on calipers cuased by improper brake mc pushrod adjustment, if you have had any recent brake work like a MC replacement it could be that it was not properly adjusted as far as pedal free play... check those.. please let me know if this helps, rate my help...thanks

Aug 06, 2009 | 1998 Chevrolet Tracker

5 Answers

Cannot find tool to loosen front wheel bearing lock nut


I have a 1995 Geo Tracker 4WD with the same exact problem,However I did some research . You will need to go to the Kent Moore Website which makes specialty tools and look up Wheel bearing socket "J-37763" I saw the picture of it and it looks like there are 4 small rounded teeth/tabs. Unfortunately get ready to spend some money - cost is about $70.00 not including shipping/handling
I hope that this Info. helps - Jim H.

Apr 06, 2009 | 1995 Geo Tracker

1 Answer

Replace wheel bearing (front-driver) on '93 Geo Tracker 4x4 (Details)


http://carfix.stufftoread.com/

see front wheel bearings and hubs here.

Sep 26, 2008 | 1993 Geo Tracker

1 Answer

Replace wheel bearing - '93 Geo Tracker 4x4


http://carfix.stufftoread.com/

see bearing and hubs.

full spec

Sep 26, 2008 | 1993 Geo Tracker

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,077 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7713 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...