Question about 2007 Pontiac G6 GT Convertible

2 Answers

2007 Ponttiac G6 brake lights stay on while griving and when I brake they turn off. I had my brake light sensor replaced and it didn't fix my problem.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I am having this same problem. I also have a 2007 G6 but a v6 sedan. have you fiqured it out yet?

Posted on Oct 28, 2010

  • Will Boyer
    Will Boyer Jan 29, 2014

    The BCM (Body Control Module) located under the passenger side tearaway panel in the center behind the stereo is to blame. A small bit of dieelectic grease to the whole BCM is a quick fix. Reapply as problems represent themselves (more frequently in the summer). This is a known issue and they have yet to come up with a recall on the BCM instead relay the cost back to the owner at the tune of $250+ for the part not including labor.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check the stop light relay in the fuse box under hood

Posted on Nov 21, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abslight stays on. How to fix? This is a2007trailblazer?


First you need to have EBCM - electronic brake control module check for DTC'S - diagnostic trouble code's . If the light is on there is a code stored . I think most part stores can do this and for free . After you find out what code is stored , looking up that code in service repair information for diagnostic trouble shooting chart would be next step . There are a few codes too.
DTC C0035 or C0040
DTC C0045 or C0050
DTC C0110
DTC C0131
DTC C0161
DTC C0186
DTC C0196
DTC C0201
DTC C0240
DTC C0241 or P0856
DTC C0244 or P1689
DTC C0245
DTC C0283
DTC C0287
DTC C0290 or C0292
DTC C0455
DTC C0550
DTC C0558

Find the code do the diagnostic's , fix the problem , wiring issue's , a sensor , bad module ,what ever it is . The light will go out then . Here is a sample of code discription .
• DTC C0035 Left Front Wheel Speed Sensor Circuit
• DTC C0040 Right Front Wheel Speed Sensor Circuit

Dec 30, 2016 | 2007 Chevrolet Trailblazer

1 Answer

How do you reset abs/wax light on 07 Pontiac G6


Try the brake and trac sensor its the same sensor

Dec 21, 2012 | 2007 Pontiac G6 GT

1 Answer

My brake lights stay on until I begin to press the brakes my car. When I press the brakes on my car, the brake light won't turn on and won't turn back on. Does this mean I need to replace my brake...


on your brake pedal yuo have a switch to turn off the brake lights when not in use and when depressed turns on yuor brake lights. i would suggest either trying to adjust them on the pedal and if not replace the switch.

Sep 30, 2011 | 2006 Pontiac G6

1 Answer

2007 pontiac g6 tale lights won't go off while driving. When brakes are applied the lights go off.


shot in the dark here...

possible a reversed harness connector at the brake pedal position sensor (on the brake pedal)... Also, there is a recall for this type of thing too.

Nov 06, 2010 | 2006 Pontiac G6

1 Answer

2007 Pontiac G6 brake lights stay on when driving and when I brake they turn off. (Opposite of what the brake lights are for). I have had the brake switch replaced and it didn't fix my problem.


Problem is caused by a bad connection between the body control unit and the wiring harness computer. Remove the cover panel located at the center console at the left of the front passenger footwell. The body control unit is under this panel. Unplug the blue connector from the control unit first pushing up on the grey retainer clip and then pulling the blue connector out of the socket. Smear some dielectric grease into the connector pins and replug the connector. Put everything back together. Do this with the ignition off so no power is going to the module. This should fix the problem--very common on this vehicle.

Jun 15, 2010 | 2007 Pontiac G6 GT Convertible

1 Answer

2007 g6 brake lights will come on and stay on will driving?


Look up above your brake pedal and you should see a switch that comes into contact with the pedal arm. Disconnect the switch and see if your brake lights are still one as the switch may have become stuck and is staying in the on mode.

Aug 24, 2009 | 2007 Pontiac G6 GT Convertible

1 Answer

Brake lights stick while driving but turn off when pressing brake


CHECK YOUR BRAKE LIGHT SWITCH THAT IS ON YOUR BRAKE PEDAL UNDER THE DASH

Jul 05, 2009 | 2007 Pontiac G6 GT Convertible

1 Answer

Pontiac g6 sedan 06 model


2007 PONTIAC G6 CONVERT. BRAKE LIGHTS STAY ON WHILE DRIVING AND GO OFF WHEN PUT BRAKES ON, AND YOU CRUISE CONTROL WILL NOT WORK WHILE BRAKE LIGHTS ARE ON.

Mar 30, 2009 | 2008 Pontiac G6 Sedan

Not finding what you are looking for?
2007 Pontiac G6 GT Convertible Logo

Related Topics:

536 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...