Question about Saturn SC2

1 Answer

How to replace feul sensor on 1998 saturn - SC2 Saturn Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,190 Answers

Hello: You have to lower the fuel tank to replace the fuel level sensor. To do this you need to disconnect all fuel lines and that also includes the fill hose and vent hose. Also disconnect the electrical wires. A lock ring holds the fuel pump module in place, remove it (counterclockwise) When removing the fuel pump module assembly you have to turn it some and pull up easy, becareful that you don't pull to hard and make the module come apart (both the module and fuel level sensor are expensive) You will see how the electrical connection works when you remove the old one. The Senor mounts on the side of the fuel level module. You have to release a plastic clip to remove the old one. You have to re-use the float assembly.

Posted on Oct 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you know if you have a bad fuel pump/filter on a 2007 Saturn Vue


replace the MAP sensor or check the vaccum and electrical wires to it or idel air control selinoid, if the feul rail near the injectors have a schrader valve like a tire valve stem turn the key all the way on and push it in and see how hard the feul spraycomes out and that will also bleed out the airbubblesif there is any thats if u ever ran out of gas before should do that ever time u run out a strong spray means its good low or no spray its bad

Nov 18, 2014 | Saturn Cars & Trucks

1 Answer

Saturn 98 SL2 check engine light on. Car cuts out


o2 sensors don't usually cause tht kind of problem. srparate the catylist from the front pipe and take it for a spin,

May 13, 2010 | 1998 Saturn SL

2 Answers

I have a 1998 saturn sl1 with a code PO452 how do i fix it


CODE PO452 IS FUEL TANK PRESSURE SENSOR CIRCUIT LOW INPUT CONDITIONS.YOU COULD HAVE A FAULTY FUEL TANK PRESSURE SENSOR.

Apr 18, 2010 | 1998 Saturn SL

1 Answer

How can replace camshaft position sensor


This engine does not use a cam sensor

Jul 16, 2009 | 1998 Saturn SL

1 Answer

How to replace coolant heat sensor on 1998 saturn


the coolant temp sensor is located on the right side of the cyl head its small under by the upper rad hose 13mm socket removes it after u take the small connector of,make sure the car is cold coolant will come out when u remove it,,,,check the connector too for corrosion,by only saturn sensor the cheap autozone and aftermarket ones dont read right and give you the same problem as the old bad one

Jun 18, 2009 | 1999 Saturn SL

1 Answer

Solution for 1998 saturn sl


Hello DTC P0341 & P0133 very common saturn Codes.You need to check condition of Plugs & wires,If not New Replace All Plugs & Wires,also I would replace the #1#4 Coil for the P0341.For the P0133 Reaplce your front O2 sensor with an OEM sensor,not an aftermarket.

May 03, 2009 | 1998 Saturn SL

1 Answer

Saturn sl 99 will crank but won't start


i have found on that car if the temp sensor is unpluged or is bad oddly enough it wont let the car start you should check it and or replace it

Mar 31, 2009 | 1999 Saturn SL

1 Answer

Cam Shaft Position Sensor 1998 Saturn SL


Have a look at this link, scroll to your engine & click on picture to expand for better view.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528017e904

Jan 23, 2009 | 1998 Saturn SL

1 Answer

Saturn sc1 starting


check coolant temp sensor located at driver side end of cyl head. remove sensor and check or cracks. also check connector for corrosion. if cracked, go to dealer for replacment. they eill sell you a new designed metal sensor to replace your cracked plastic one. dont buy aftermarket, they will not be accurate. cracked sensor will cause eng. to run rich. may start ok cold but not when hot.

Oct 19, 2008 | 1998 Saturn SC

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...