Question about 1990 Toyota Corolla
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Do you happen to have a hacksaw blade? The thickness of the hacksaw blade is equal to the clearance of the
spark plug contacts. You can put the hacksaw blade flat
between the contacts, and make the necessary adjustment. Then, start your engine. Send in your e-mail
so we will know.
Posted on Oct 11, 2009
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
Posted on Nov 04, 2009
Tips for a great answer:
Dec 29, 2015 | Toyota Cars & Trucks
Dec 28, 2014 | 1990 Toyota Corolla
Feb 07, 2013 | 1990 Toyota Corolla
Sep 16, 2012 | 1990 Toyota Corolla
Feb 18, 2012 | 1990 Toyota Corolla
Apr 06, 2011 | 1990 Toyota Camry
Mar 23, 2010 | 2009 Toyota Corolla
244 people viewed this question
Usually answered in minutes!