Question about 2006 Honda Odyssey
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2000 Honda Odyssey Coin Holder
open the cup holder shine a light above it you will see a tab you can use a screwdriver to seperate the tabs and the cup holder will slide out
Posted on Dec 30, 2008
I will never understand why this service is so expensive at the dealership.
I made a video showing how this is done: (I would recommend watching the video in HQ and full screen)
Posted on Apr 21, 2009
D problem is simply a lightbulb out on the cluster board.
Simple to remove the cluster and replace the bulb.
The Service Required light can be reset by
1) Turn they key to the II position
2) Turn the key to the off position, and push and hold in the odometer reset button
3) Turn they key back to the II position, while still holding the button.
4) After about 10-15 seconds, the light should go off.
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
Posted on May 13, 2009
They have a recall update on torque converter shutter, if update has been installed or problem still exist then the torque converter needs replaced
Posted on Sep 04, 2009
Use a wrench to remove the mounting bolt from the underbody through the hole in the splash shield.
Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the bumper.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb from the fog light assembly by turning it one quarter turn counterclockwise.
Push the electrical connector onto the new bulb.
Turn on the fog lights to test the new bulb.
Reinstall the fog light assembly into the bumper. Tighten the mounting bolt.
Insert the new bulb into the assembly and turn it one-quarter turn clockwise to lock it in place.
Hope this helps you.
Posted on Nov 22, 2009
Tips for a great answer:
Feb 12, 2017 | Cars & Trucks
Apr 09, 2016 | 2005 Acura TL
Sep 12, 2015 | 2003 Honda Odyssey
Apr 27, 2011 | 2006 Honda Odyssey
Apr 13, 2011 | 2002 Honda Odyssey
Dec 15, 2010 | 2006 Honda Odyssey
Nov 09, 2009 | 2006 Honda Odyssey
Jul 27, 2009 | 1997 Honda Odyssey
Jul 08, 2009 | 2001 Honda Odyssey
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: