Question about 2006 Volkswagen Jetta

1 Answer

I NEED TO REPLACE REPAIR THE SIGNAL LIGHT IN THE DRIVER'S SIDE MIRROR. Thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

You will need to start by removing the glass from the mirror housing by pulling the glass out foward carefully .

- Remove mirror glass. Refer to ? Chapter "Mirror Glass".
- To facilitate installation, fold rear view mirror forward.
- Press mirror housing using a screwdriver beneath catches -2- out of locking mechanisms.
- Pull mirror housing in front area slightly off mirror carrier.
- Then, remove mirror housing -1- upward from mirror carrier.

i NEED TO REPLACE REPAIR - 89a535b.png

Then after removing caps you will have access to the screws for the turn signal assembly

0c389c1.png

- Remove screws -4- and remove assembly piece -B- downward.
- Disconnect harness connector -5- from turn signal -3-.
- Remove screws -2- and remove turn signal -3- from assembly piece -1-.

Note - Don't worry about the lever its a special tool but you can use a plastic screwdriver or something like it and yes it just pulls out then you unplug it.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Oct 10, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 375 Answers

SOURCE: need to replace drivers side mirror

not so difficult , there should be a piece of trim straight in from mirror on inside of door, remove trim behind should be nuts holding mirror on.

Try partstrain.com they sell aftermarket replacement parts, mirrors look like origionals but alot cheaper

Posted on Jun 24, 2008

MNfisherman
  • 11896 Answers

SOURCE: Replacing the Mirror Light - driver's door

Remove or disconnect the following:

  • Disconnect the negative battery cable.
  • The mirror inside cover trim
  • The door panel
  • The electrical connector to mirror motor
  • The nut attaching mirror assembly to door frame
  • The outside rear view mirror
  • e7dfc8d.jpg
Removing cover trim and nut
1adc7b1.jpg
Removing cover trim and nut

Posted on Jan 24, 2009

  • 1986 Answers

SOURCE: Installing replacement side mirror on 2007 Subaru Forester

yes... you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you can access the bolts holding the mirror on and disconnect the wiring harness as well..

Posted on Aug 20, 2009

tntjasmine
  • 24 Answers

SOURCE: I need t take off a drivers side wing mirror

you may be able to remove the mirror inner trim panel (small triangular shaped trim piece above door trim panel)
to access the mirror mount.
If not then you will have to remove the trim panel for access to the back side of the mirror

Posted on Aug 26, 2009

  • 1986 Answers

SOURCE: Need to replace driver side mirror for Camry 2002, Power mirror

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the turn signal light on the drivers side view mirror?


If the signal flashes on the outside of the glass, then the yellow lens will pop off the mirror assembly using a small screwdriver etc for bulb access. If the signal flashes inside the mirror assembly, the mirror will need replacement or there is a wiring issue

Jun 21, 2015 | 2004 Ford Freestar

1 Answer

2004 gmc 2500 i have heated folding turn indicator side mirrors.turn indicator is not working on driver side.is it possible to repair ot do i need to replace?


I'd call a GMC dealer and ask for the parts department. I'd ask about the availability and price of the driver's mirror turn signal bulb. That might tell you if that bulb is replaceable. You could also ask that same delaership's service department about the labor cost to replace the bulb.
If the plastic cover below the mirror will not snap off, you would probably have to remove the mirror from the door and take it apart to replace the bulb. Depending on the friendliness of the GMC service or parts department , they might tell you what to do here.

Jan 18, 2013 | Cars & Trucks

1 Answer

On my 2008 ford F350 the driver side mirror marker lights are not working. I need to know how to repair them. Thanks


If it's just that the bulbs that have burnt out you'll need to position the exterior mirror glass inward toward the vehicle.(Note: Use caution to not trap the side lamp assembly wiring during installation, or damage to the wiring may occur.) Using a flat blade screwdriver or something similar, push the mirror side lamp assembly forward while releasing the retaining clip. Separate the bulb holders from the mirror side lamp assembly and remove the side lamp. Replace the bulbs and reassemble. I hope this helps you out.

Mar 08, 2011 | Ford F-350 Cars & Trucks

1 Answer

Need to replace driver side mirror. The mirror is


gm does make just a mirror glass than you can get at you local dealer.First ck all the clips on the mirror and make shure that they are not cracked

Feb 24, 2010 | 1994 Pontiac Grand Am

1 Answer

Replace a broken side mirrors on 91 Accord


your new mirrors should come with the instructions shor installing and wiring them up, if ordered for your car.

Sep 01, 2009 | 1991 Honda Accord

1 Answer

I need to replace broken lense for side mirror turn signal.


hi, if you want to buy a replacement lens,pls don't hesitate to contact us by email judy@think-tec.com
we are a big direct wholesaler for camera & camcorder replacement repair parts, you will also get more info. about us from www.think-tec.com
thanks.

May 14, 2009 | 2007 Toyota Tundra

1 Answer

Broken side rear view mirror


the only way to fix if the mirror is damaged is to replace mirror assembly. remove the trim piece on the backside of the mirror and remove the 3 10mm nuts holding the mirror on.

Mar 25, 2009 | 2005 Saturn VUE

3 Answers

Replacing the Mirror Light - driver's door


I assume your question is how to replace the bulb in the side mirror. Can you please tell us the make and model of the car.?
Thanks,

Jan 24, 2009 | 2002 Volvo S80

Not finding what you are looking for?
2006 Volkswagen Jetta Logo

855 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77202 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...