Question about Dodge Stratus

Open Question

1998 Dodge Stratus ES 2.5L V6. Two OBD Codes come up: P1782 and P0700-Transmission Control System Malfunction. This sounds pretty serious. Can yo please tell me what the code P1782 is for and what I will need to do to fix it myself and as cheap as possible?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Transdoc
  • 829 Answers

SOURCE: my 1999 grand caravan showed

p0700 means there is a code stored in the tcm ( transmission control module). P1782 is 2-4 pressure switch sensor sense. This could be just a bad connection or a bad solenoid pack. Many times itis the beginning of the end.

Posted on Jan 23, 2011

emissionwiz
  • 75066 Answers

SOURCE: engine light on code p0732, p1782, p1787 and p0700 twice

P0732 Gear 2 Incorrect ratio
P1782 P/ES Circuit Out Of Self Test Range
P1787 2-1 Downshift Error
P0700 Transmission Control System (MIL Request) Malfunction

Here is the deal, u have some serious transmission related faults, in order to sort this out u will need to take this to the dealer, allot of testing is required to get to the bottom of this, if I had to guess I would say the trans is going to have to be overhauled.

Posted on Mar 19, 2009

polarcycle
  • 1392 Answers

SOURCE: 2003 Dodge Ram 1500 computer codes

P0304, could be a bad plug, bad coil, bad injector, low compression, or other stuff. The P0700, you need to look at codes in the TCM. It is telling you that the trans computer has a fault in it.

Posted on Jun 20, 2009

  • 412 Answers

SOURCE: transmission codes:

I WOULD TRY REPLACING THE INPUT SPEED SENSOR..A DEFECTIVE SPEED SENSOR CAN CAUSE ALL OF THESE FAULTS..IT IS LOCATED IN FRONT OF TRANS ABOVE SOLENOID PACK..IT IS THE ONE CLOSEST TO THE ENGINE..IT SCREWS INTO TO TRANSMISSION..A 1 INCH SOCKET FITS IT..ALSO CHECK WIRING TO BOTH SPEED SENSORS..A SENSOR IS ABOUT 35 BUCKS,AVAILABLE AT YOUR LOCAL DODGE DEALER..GET A NEW ONE AND YOU'LL SEE WHAT IT LOOKS LIKE..FAIRLY COMMON PROBLEM..HAVE REPLACED LOTS OF THEM

Posted on Jul 07, 2009

  • 117 Answers

SOURCE: I have a 2000 plymouth voyager with error codes

speed sensor most likely this transmission runs 2 an input and an output. if your speedometer is fluctuating or not working it would be output problem if not probably an input speed sensor. these sensors can be purchased for around 40$ i believe at your local dodge/chrysler dealer.

replacement is fairly easy. open hood remove air cleaner locate the sensor on the transmission. in put is closet to engine. unplug sensor remove by unscrewing it. reverse for installation. disconnect battery for 2 min to clear codes and road test

Posted on Nov 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 dodge ram randomly hesitates while accelerating


P0420 & P0430 are catayltic coverter codes ! P0440 Evaporative Emission Control System Malfunction P0700 Transmission Control System Malfunction
P0760 = Shift Solenoid C Malfunction

Read more at: http://www.obd-codes.com/forums/viewtopic.php?t=10525
Copyright OBD-Codes.com
Read more at: http://www.obd-codes.com/p0700
Copyright OBD-Codes.com

Read more at: http://www.obd-codes.com/p0440
Copyright OBD-Codes.com

http://www.obd-codes.com/p0420 http://www.obd-codes.com/p0430 http://www.obd-codes.com/p0440 Sounds to me like you have some major problems and need to take your vehicle to a qualified repair shop .

Nov 26, 2016 | 2004 Dodge Ram

1 Answer

Transmission down shifting to 2 code po 700 or but it does not shift to 3rd gear anymore was resetting it 1st time lasted a month then every 2 or 3 weeks now i can"t reset it anymore no codes


P0700 Transmission Control System Malfunction OBD-II Trouble Code Technical Description Article by Dale Toalston ASE Certified Technician Transmission Control System TCS Malfunction What does that mean? Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory. This illuminates the Malfunction Indicator Lamp (MIL) to let the driver know there is a problem. If this code is present and the MIL (Malfunction Indicator Lamp) is illuminated that basically means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module. Symptoms Symptoms of a P0700 DTC may include: Malfunction Indicator Lamp (MIL) illumination The transmission may exhibit drivability problems like slipping, etc. Causes More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely). Possible Solutions For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission. If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself. Register now to ask a question (free) Related P0700 DTC Discussions pt cruiser P0605, P0700, and P1391 What does P0605, P0700, and P1391 mean....I just put in a new catalyst on my car for smog but light engine turned back on...and I can't seem to know what is wrong ...please help me out here... 2002 Dodge Intrepid P0700 & P0841 code my code scanner come up with the codes PO700 and PO841. the 700 code i was told it was the input and output sensors.i had those changed a month and a haft a go. now they are back on and the po841 is on were is the 841 sensor located the machanic i go to tells me my transmission has to be replaced bu... ODB Codes Dodge Caravan 2005 P0700 and P0522 Hello I have a 2005 Dodge caravan and need a fix for these codes please.. P0700 and P0522 came up.. basically ths is stuck in limp mode or 2nd gear.. I am thinking I need a new Transmission Control module.. but can anyone confirm that... 2001 Honda Civic accord p0700 and p0740 Hi I went to get my Honda civic check and p0700 and p0740 codes came up the car has a lil leak But however the car is not slipping or anything. it's not showing no Transmission sign issues. I wanted to know what could possibly be the problem thanks you... 2005 Dodge Caravan P0700 and P0420 I have a 2005 Dodge Grand Caravan.The other day the check engine light came on.I stopped at auto parts store and they checked codes for me.P0700 and P0420 are the codes that came up.What do these mean and why did they show up?My van is running fine.Do I need a tuneup?Or is it something else?I am hop...

Read more at: http://www.obd-codes.com/p0700
Copyright © OBD-Codes.com

May 23, 2015 | 2006 Dodge Dakota

2 Answers

2006 Dodge stratus code p0700


code p0700 refers to transmission control system/ mil--malfunction===causes--wiring--TCM
check all wiring and connections to the transmission for water,corrosion etc
check/change the tcm ( transmission control module)

Apr 23, 2015 | 2006 Dodge Stratus

2 Answers

Codes P1782, P0755, and P0700


P1782 DODGE - 2/4-OD Pressure Switch Circuitxicon.jpghttp://engine-codes.com/p1782_dodge.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty 2/4-OD Pressure Switch
- 2/4-OD Pressure switch poor electrical connection
- 2/4-OD Pressure switch circuit is open or shorted
Symptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission shift shockP1782 DODGE Description The pressure 2/4-OD Pressure Switch is part of the pressure switch of the transmission. The pressure switch are located in the solenoid assembly. The switch provide input information to the Transmission Control Module (TCM). The switch will inform to the TCM is pressure exist in a specified hydraulic circuit. the TCM uses this information to verified that the solenoids are working or not.
P0755 DODGE - 2/4 Solenoid Circuitxicon.jpghttp://engine-codes.com/p0755_dodge.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty 2/4 solenoid valve
- 2/4 solenoid valve harness is open or shorted
- 2/4 solenoid valve circuit poor electrical connection
P0700 DODGE - Transaxle Control System Malfunctionxicon.jpghttp://engine-codes.com/p0700_dodge.htmlForum CodePossible causes- Shorted or open circuit within transmission control module (TCM)
- Failure of transaxle control module Tech notes Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem.
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transaxle shifting problems

Jul 26, 2012 | Plymouth Breeze Cars & Trucks

3 Answers

What does these codes mean P1781, P0731, P1784 AND P0700 AND HOW DO I FIX THEM.


p1781 is manufacturer control transmission, p0731 is gear 1 ratio incorrect, p1784 is manufacturer control transmission, p0700 is trans, control system malfunction. all of these codes refer to tranny.This code normally points to a faulty transmission control module, but this is an expensive part and you should have an experienced Dodge technician diagnose the problem first. or a transmission specialist. the other codes are probably associated with the p0700 code. have a good day !

Apr 27, 2011 | 2001 Dodge Grand Caravan

2 Answers

My 1999 grand caravan showed codes p1782 & p0700,& it is acting fine & th check engine soon light went off on its own. is there a problem?


p0700 means there is a code stored in the tcm ( transmission control module). P1782 is 2-4 pressure switch sensor sense. This could be just a bad connection or a bad solenoid pack. Many times itis the beginning of the end.

Jan 23, 2011 | 1999 Dodge Caravan

1 Answer

Codes p0700 and p0740 came up when checked. any ideas on what could have caused it? it is a 2002 dodge stratus.


P0700 Transmission Control System Malfunction

P0740 Torque Converter Clutch Circuit Malfunction

Sounds like the auto transmission is having or about to have some issues. Normally you will see the engine running faster than is should for the speed you are traveling. get your transmission checked out soon

Nov 06, 2010 | Dodge Stratus Cars & Trucks

1 Answer

2000 Stratus will not shift out of second


Indications are that the transmission has some serious issues. You may want to call a reputable local transmission shop and explain the situation, including the codes. They can give you your options. But I suspect you need the transmission rebuilt or replaced.

Apr 27, 2017 | 2002 Dodge Stratus

1 Answer

Engine light on code p0732, p1782, p1787 and p0700 twice


P0732 Gear 2 Incorrect ratio
P1782 P/ES Circuit Out Of Self Test Range
P1787 2-1 Downshift Error
P0700 Transmission Control System (MIL Request) Malfunction

Here is the deal, u have some serious transmission related faults, in order to sort this out u will need to take this to the dealer, allot of testing is required to get to the bottom of this, if I had to guess I would say the trans is going to have to be overhauled.

Mar 19, 2009 | 2001 Chrysler Concorde

1 Answer

Transmission problem


P0715 - Input/Turbine Speed Sensor Circuit Malfunction


P0700 - Transmission Control System Malfunction

Feb 14, 2009 | 1997 Dodge Stratus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...