Question about 1993 Plymouth Voyager

1 Answer

How do i install a serpentine belt in a 1993 Plymouth voyager

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 707 Answers

The diagram should be posted under the hood and all you need is a rachet to move the tension idler to replace belt...Hope this helps.

Posted on Oct 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change serpentine belt 1998 plymouth voyager 3.0 engine


draw a diagram of how the belt is on now
there is tension pulley which fits a 3/8 ratchet
release the tension on the belt and remove it
install the new belt using the diagram you drew

Nov 11, 2013 | Cars & Trucks

2 Answers

If my a/c is gone do i still need the belt


no, as long as it isn't driving anything else, you can remove the belt.

Oct 02, 2010 | 1993 Plymouth Voyager

1 Answer

Serpentine belt fell off need diagram


This is for 1994 should be the same if engine is V6

e8b62ed.jpg

Jun 30, 2010 | 1993 Plymouth Voyager

1 Answer

Need 1993 plymouth voyager serpentine belt diagram


Which engine?
To replace the drive belt or serpentine belt on a Voyager check the engine size. For 2.4L engines, a serpentine belt runs the air conditioning compressor and alternator. For 3.0L models, the alternator and power steering share a belt with a separate belt for the AC. Dodge recommends checking the belts every 15,000 miles or 12 months for possible replacement. I have gone 3 yrs with one.. it will start squealing when you turn on the heater to defrost..

http://www.automd.com/46/how-to-replace-a-serpentine-belt/

Most replacement belts have a diagram on the package. However, the easiest way is to pay close attention to the belt you are taking off, and replace the new one the same way. The pulleys themselves are usually 'grooved' or 'smooth' which tells you whether the front or back of the belt is against it. The hardest part is figuring out how to release tension on the idler-pulley. If you can get the belt on and the idler/tension pulley (same thing) pulls the belt tight, chances are you got the belt right. If you don't know what I mean, then the mostest best way is to get a Clymer Manual and read up. Its really a simple thing to do yourself.

I used a long heavy duty screw driver to release the tension on a Pontiac Sunbird.. the belt will only fit on one way..

May 15, 2010 | 1993 Plymouth Voyager

1 Answer

Need 1993 plymouth voyager serpentine belt diagram


Check under the hood for routing sticker. Most cars have one there. If not, you could ask the dealer or your local auto parts store for it.


Please rate this answer. Thank you.

Mar 27, 2010 | 1993 Plymouth Voyager

1 Answer

Serpentine diagram for a 1997 Plymouth Voyager


Make a drawing of where the belt and pulleys are before you remove the belt. You won't need a diagram,you will have made your own and be done before you ever find one,unless you have a shop manual already.

Feb 08, 2010 | 1997 Plymouth Voyager

1 Answer

Replace serpentine belt on 1993 plymouth voyager


if you get your belt from Autozone it will have the routing on the back

Nov 22, 2009 | 1993 Plymouth Voyager

1 Answer

Need to know how to put in a surpentied belt for a Plymouth voyager


For the 1993 Plymouth Voyager Serpentine Belt:
Did not specify what Size Engine: 2.5L, 3.0L or 3.3L.

Click on the following free direct Link. It has several of the Serpentine Belt Diagrams and Tensioners that are possible with your Size Engine (2.5L, 3.0L, 3.3L) and engine options (AC/No AC, etc.).
http://www.2carpros.com/car_repair_information/year/1993/make/plymouth/model/voyager/1993_plymouth_voyager_drive_belt_routing_diagram.htm

"HOW TO":
Standard Rules to Removal the Serpentine Belt with a Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.


Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

Sep 24, 2009 | 1993 Plymouth Voyager

1 Answer

Need timing belt diagram for 1993 Plymouth Grand Voyager 3.3 L engine!


Are you sure you don't need the serpentine belt diagram or you have a 3.0? Because 3.3's don't have a timing belt. Let me know.

Mar 05, 2009 | 1993 Plymouth Grand Voyager

Not finding what you are looking for?
1993 Plymouth Voyager Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...