Question about 2007 GMC Yukon Denali
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2007 xl7
Brake lights were easy... open hatch you will see 2 lil circle covers with a notch out of the bottom for removal... i used a flat head to remove these then used a phillips head screw drive to remove the two screws behind the covers... pull out unit and you will see where the bulb goes... pull that out and just put the bulb in. It was sooo very easy... thanks Kim
Posted on Jan 26, 2009
the low beam bulb?? it's not that hard turn the wheels to gain access to the wheel well and loosen the inner fenderliner (plastic) to gain access to the back of the headlamp assy
Posted on Jun 23, 2009
Open the hood, above each headlight is 2 rods, unlatch the rods and lift striaght up, the headlight will now lift out and you can replace the bulb, It turns about 1/3 of a turn left to unlatch the bulb. After the bulb is replaced, set headlight back in place and push the rods back down, you may need to wiggle the light housing to align the holes so the rods seat all the way down.
Posted on Oct 24, 2009
SOURCE: Replace headlamps 2007 GMC Yukon
It should be pretty easy, thats why there no "directions" Lift up the hood, now at the headlights there should be 2 rods, lift these rods and the lights should lift out, to access the bulbs.
Posted on Nov 06, 2009
Tips for a great answer:
Mar 29, 2012 | 2007 GMC Yukon
Feb 09, 2011 | 2007 GMC Yukon Denali
Jan 18, 2011 | 2007 GMC Yukon
Dec 09, 2010 | 2007 GMC Yukon Denali
Sep 16, 2010 | 2007 GMC Yukon
Jun 05, 2010 | 2007 GMC Yukon Denali
Jan 23, 2010 | 2006 GMC Yukon Denali
Jan 21, 2010 | 2007 GMC Yukon
448 people viewed this question
Usually answered in minutes!