Question about 1998 Chevrolet C1500

2 Answers

1998 silverado 5.7 ltre.

Hi I Have a Chev. 1998 Silverado step side box 5.7ltre I am replacing the the rh bulb cradle for the 3rd time for the back of the truck, It's always the break light and signal light thats burnt out. Just put one on 8 months ago and now we are just putting another one on. 2. My other problem is my wipers they will work sometimes and other times they won't seems when I hit a bump they work can anyone help me solve theese two problems.

Posted by on

  • pear777 Jul 12, 2008

    I am having the same problem with the same RH cradle. It burns out after a few months. The brake and turning lights go out. And I'm having a problem with the license plates lights coming on.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 66 Answers

The wipers for this truck were recalled because of the wiper motor.The tail light circuit board should be replaced with an ac delco part not an autozone knock off.If you use auto zone you replace that part every 6 months.

Posted on Nov 29, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

For the bulb cradle you need to use some dielectric grease on the bulb contacts and check the ground for the tail light harness, on the wipers you need to replace the board in the wiper motor, it's available at the dealer and it may be a recall so it would be free

Posted on May 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 Chevy extended cab 1500 and the controls on my driver side door aren't working. The door is saying it ajar when it's closed. I can't roll the windows up or down. Is it the master switch?


How to fix the Chev power window door lock switch - YouTube

? 5:04
https://www.youtube.com/watch?v=XDKaDURD8Sc
Jul 13, 2013 - Uploaded by spelunkerd
How to fix the Chev power window door lock switch ..... Some time later my drivers side window stopped working in the down position. ... These intermittent electrical problems are frustrating,aren't they? .... How To Install Replace Door Locks Chevy GMC Truck Silverado Sierra Yukon Tahoe Suburban ...

Diagnose Power Door Locks Dont Work Properly - Auto ...

www.auto-repair-help.com/.../diagnose_power_door_locks_dont_work_...
An inoperative power door lock can be caused by the switch, solenoid, wiring problem or ... Hi, I have a 2005 Nissan Sentra and the power locks aren't working. .... Hi, mypassenger door locks/unlocks both doors but my driver side door works independently and .... I have a 1986 Chevy Silverado K10 with auto door locks.

SilveradoSierra.com • 2003 silverado no power in right door ...

www.silveradosierra.com/.../2003-silverado-no-power-in-right-door-t30...

Dec 26, 2015 | Cars & Trucks

1 Answer

Where is the drl module located on a 1998 chev silverado 4x4


Under the dash behind the main headlight switch.

Oct 11, 2012 | Cars & Trucks

2 Answers

How do i remove headlight to change bulb in 2007 chevy 2500HD


For the driver side just locate the bulb in question. Rotate the bulb housing 45-90 degrees counter clockwise. Pull bulb out and disconnect wiring harness. replace bulb then reverse steps. For the passenger you will have to remove the aircleaner box. to do this pull up on the box, it should pop up then proceed with original directions for driver side.

Dec 12, 2010 | 2007 Chevrolet Silverado 2500HD

1 Answer

05 chev 2500, blower motor 3rd speed was not working and now it only works on 5?


This is due to the fan switch or blower switch, the one in the dash not functioning properly. You need to replace this switch.

Jul 29, 2009 | 2005 Chevrolet Silverado 1500HD

1 Answer

Bulb replacement on 2004 Chev Silverado Radio


No it cannot but if you go on ebay im sure you can find a cheap replacement.

Mar 13, 2009 | 2000 Chevrolet Silverado

1 Answer

2006 Chevrolet Silverado 2500HD tail lights stopped working


I am having the same problem on an 04 2500hd there isa 15 amp stop light fuse inside the cab on the side of the instrument panel and a 25 amp stop light fuse under hood. you could also have a break switch issue the switch is located up on the break pedal linkage you should have power on the white wire when you push the pedal in (check with a test light) in my case I have a broken wire along the frame rail in the harness it is a light blue wire,

Mar 08, 2009 | 2006 Chevrolet Silverado 2500HD 2WD

1 Answer

Where is the cam shaft sensor in my 1999 chev. silverado 1500


it should be on the drivers side under the exhaust manifold close to the rear firewall.

Mar 03, 2009 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
1998 Chevrolet C1500 Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...