Question about 1998 Oldsmobile Cutlass

1 Answer

Where is the EGR Valve located on !998 Olds. Cutlas V-6 ?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Oldsmobile Master
  • 655 Answers

Usually on top of the engine on the drivers side. Has a 2 wire connector on the top and two 13mm bolts holds it in place. Easy to change out.

Posted on Oct 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you drain coolant from 1995 olds cutlas 3100.


There should be a petcock(drain valve) on the bottom corner of the radiator. Turn it counterclockwise till coolant starts draining. Have a drain pan under the valve.

Dec 06, 2016 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Replaced fuel pump and fuel filter on my 94 olds cutlas supreme. Will start and run for 30 min's then will die and not start again for hours


Did it have this problem before you changed the fuel pump an filter ? When it dies an won't restart for hours ,is there spark at the coils ? What engine does yours have V-6 . Check for spark the way this guy does in this video. GM Ignition System diagnosis 1988 Olds Cutlass Same ignition system >

Oct 30, 2015 | Cars & Trucks

1 Answer

Where is egr valve located on 1983 chev s10 blazer


4 cylinder model the EGR valve is located between 2 & 3 cylinder on intake manifold and between Carb and valve cover it has a diaphragm cover about 3 inches round and one vacuum hose 2 bolts holds it to the intake. V-6 models EGR valve is located on drivers side of engine just behind carb and about the same size and roundness and one hose two bolts.

Nov 04, 2013 | Ford Expedition Cars & Trucks

1 Answer

Location of egr valve on 2003 chevy silverado


Hi there:
Here is a picture showing the EGR valve on the 4.8 Litre V8. The numbers below go with the picture. The arrow points to the front of the truck.

(1) Fuel Injector 2 Connector
(2) Throttle Actuator Control (TAC) Motor Connector
(3) Throttle Actuator Control (TAC) Motor
(4) Exhaust Gas Recirculation (EGR) Valve Connector
(5) Exhaust Gas Recirculation (EGR) Valve
(6) Fuel Injector 6
(7) Ignition Coil 2


9_14_2012_3_34_36_am.jpg
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Sep 14, 2012 | 1989 Chevrolet Camaro

2 Answers

1988 olds cutlas ciera service engine light comes


Try taking the car to Autozone or similar business for a free scan of your computer (your car is a pre-OBD2 system and your mechanic may have a scanner that reads only post-'96 autos). The scan will usually only point to problem areas, not specific components. That's where the mechanic comes in with specific tests. Good luck!

Mar 01, 2010 | 1988 Oldsmobile Cutlass Ciera

1 Answer

How do I locate and replace EGR valve?


Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} EXHAUST GAS RECIRCULATION (EGR) VALVE REPLACEMENT

REMOVAL PROCEDURE
1. Turn OFF the ignition. 2. Disconnect the EGR valve electrical connector 3. Remove the bolt retaining the pipe assembly from the EGR valve and carefully pull the pipe assembly back. 4. Remove the EGR valve retaining bolts. 5. Remove EGR valve assembly. 6. Remove the gasket. INSTALLATION PROCEDURE
1.
Install the EGR Valve with a new gasket to the intake manifold. NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolts through the EGR valve. Tighten Tighten the bolts to 30 N.m (22 lb ft) 3. Connect the pipe assembly to the EGR valve. 4. Install the bolt. Tighten Tighten the bolts to 30 N.m (22 lb ft) . Connect the EGR valve electrical connector.

Jan 30, 2010 | 2001 Buick Regal

1 Answer

93 Oldsmobile Cutlas Supreme Dies, Idle Erratic


possible fuel filter. but if it dies when you come to a stop could also be egr valve, maybe

Oct 25, 2009 | 1993 Oldsmobile Cutlass Supreme

1 Answer

Locating the shift solinoid on 1991 olds cutlas ciera


it's inside the transmisson you have to remove the oil pan on the transmisson to get to it.

May 28, 2009 | 1991 Oldsmobile Cutlass Calais

Not finding what you are looking for?
1998 Oldsmobile Cutlass Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...