Question about 2006 Buick Lucerne

1 Answer

Need to replace rear turnsignal bulb - 2006 Buick Lucerne

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 233 Answers

To change any of the rear bulbs, first open the trunk. Pull any plastic clips from carpet near the lip of trunk by latch. Pull carpet (gently) away from the wall. Locate any screw caps and remove them. After all are removed, gently push on the threaded rods until the entire light assembly is out far enough to grab and pull outward. To change the bulb, simply grasp the retaining clip and with a slight push on the locking tab, turn it about a 1/4 of a turn counterclockwise (or clockwise) and pull out. Installation is the reverse of removal.

Posted on Oct 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 chevy impla and the left turnsignal fuse keep blowing every time i use the the left turnsignal ?


Sounds like a short in either the front or rear bulb, or a bad socket or even possibly a bulb installed backwards. Has anything been changed in either of these locations?

Feb 18, 2015 | Cars & Trucks

2 Answers

Why does 2007 durango right rear lower turnsignal bulb not work?


Check your flashers, they control this bulb when turn signal is activated. This is the simplest fix.

Sep 04, 2014 | Cars & Trucks

1 Answer

Right front turnsignal does not blink. front


It's a bad connection on the front balb u replaced or u might need to replace the light assembly as they corrode pretty bad.

Jul 19, 2010 | 1997 Mercury Sable

1 Answer

1998 cavalier turnsignal


front or rear bulb needs to be replaced...chevys do this so you know when a light is out...probably the front..have someone stand outside when you put on directionals to see if its out.

Jul 09, 2010 | 1998 Chevrolet Cavalier

1 Answer

How do you replacw a rear turnsignal bulb?


Open the trunk, pull back the carpet on the rear wall of the trunk behind the tail lights. If there is access to the bulb sockets, figure out which one lines up with the turn signal and turn it counter clockwise about a quarter turn then pull it out. the bulb will either pull straight out or turn quarter turn and pull out.

If there isn't access to the bulb sockets then there will be three or four nuts or wing nuts that hold the tail lamp assembly in. Remove them and the lens. Then remove the bulb from the tail lamp lens assembly.

Jun 05, 2010 | 2004 Chevrolet Cavalier

2 Answers

1998 Ford Escort Left Front Turn Signal


replace rear left globe and this will solve both problems cheers MAL

Mar 17, 2009 | 1998 Ford Escort

1 Answer

Instruction to replace left rear turnsignal bulb 2004 cavalier


Open trunk,
remove the felt cover in your trunk near the
light socket, twist and turn the socket,
pull it out, remove bulb assembly , replace with a new one bulb reinstall ... close trunk.

Mar 13, 2009 | 2004 Chevrolet Cavalier

1 Answer

Turn signals


Hello I hope I can help with your turnsignals,Your replacement bulb should be number#3057 1.Raise the tailgate.2.Look on the sides where the tail-light is you should see two push in type bolts(fasteners)remove these by prying under the fastener with a large flat srewdriver,they will come out.3.Once those are removed,carefully pull out the whole tail-light lense.On the back you'll see two bulb socket's with tab's on them.Squeeze the tab's and carefully remove the socket,now remove the old bulb then carefully push in the new one.Hope this will take care of your problem be safe and happy out there. Tim

Oct 08, 2008 | 2006 Chrysler Town & Country

Not finding what you are looking for?
2006 Buick Lucerne Logo

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...