Question about Volkswagen Golf

Open Question

What engine oil to use for Golf MK3 1.4 Ryder 1993 and how meny liters to put in?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: MK3 Golf 1.8 Driver M-reg Cutting out.

It may be the fuel filter try having it replaced

Posted on Jun 20, 2008

  • 1 Answer

SOURCE: Rear Window Switch Problem with Mk3 VW Golf 1.9TD

i had the same problem. After checking the window motor was not the problem i then checked the wiring harnes in the door. I beeped out all the connectors to make sure there were no broken wires and cleaned up all the contacts. The main connector looked quite corroded. I sprayed all the connectors with rust check and reassembled. The window is working fine now

Posted on Feb 22, 2009

  • 89 Answers

SOURCE: Hi, I have VW golf 1993, I do not know how many

it is about 3,5 to 4 litres, but it depends how much came out.

Posted on Mar 26, 2009

  • 1 Answer

SOURCE: VW Golf MK3 1996 P

Part number on my vw mk3 1996 is for a pipe from the crankcase pressure valve, 037 103 493 AK hose/pipe £13.69 plus at vw garage, 10 mins to fit, the pipe had worn holes in the corners, car runs fine now no cutting out at junctions or roundabouts.

Posted on May 22, 2009

Gypsybaron
  • 80 Answers

SOURCE: 1993 Rodeo with 2.6 liter engine. Had coolant in

Take the head to an engineering shop so they can pressure test it to see if its cracked or bent. If its bent / twisted slightly they can skim it, if its cracked they might be able to weld it otherwise you need a new head.

Posted on Jun 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a oil pan on a 1993 chevy c1500 2 wheel with a 5.7 liter engine?


Drain the oil. Loosen the engine mounts and jack up the engine. Put 2x4s under the mounts. Remove all the pan bolts and drop the oil pan. You will also need to disconnect the oil cooler lines at the oil filter housing to get to some of the pan bolts. There are also some engine support brackets you will need to remove.

Oct 21, 2014 | Cars & Trucks

1 Answer

What are the oil requirements (amount) for a 1993 Chevy Geo Tracker


if your changing the oil put 4 liters in run the car,shut off then check the level,you may have to add a 1/2 liter to top up.it depends on the filter used as some don`t hold the same as others.

May 05, 2011 | 1993 Geo Tracker

1 Answer

COOLING CAPACITY FOR 1993 TAURUS


1993 FORD TAURUS 3.0L 6-cyl Engine Code [Y] SHO
Engine oil, with filter..........4.7 liters
Cooling System, Initial Fill..........11 liters


Good luck and hope this helps, thank you for using fixya

Nov 04, 2010 | 1993 Ford Taurus

3 Answers

Where can i find the engine number


The engine number location depends on engine type.
1. For 2001 VW Golf 1.6 liters 16V engine:
9e5799a.png
2. For 2001 VW Golf 1.8 liters 20V engine:
faf40eb.png
3. For 2001 VW Golf 2.0 liters engine:
e5b8ea0.png
4. For 2001 VW Golf 2.3 liters engine:
455c372.png
5. For 2001 VW Golf 1.9 TDI-PD engine:
6b6df3f.png

Feb 18, 2010 | 2001 Volkswagen Golf

1 Answer

How much New oil should i put in to my 1992 Suzuki Sierra 4x4 Cheers Neil B


First make sure your drain plug and filter are installed and tight, then add 2 liters of oil and check to see if there is any showing on the dipstick. Add one liter at a time and recheck the dipstick. Bring the level up to the full mark on the dipstick. Now start the engine and observe the oil light(turn off) or pressure gauge(pressure goes up) then turn off engine. If neither happens after about 10 seconds, shut off engine and check for leaks or other malfunctions. If all is O.K. then recheck oil level on dipstick. It should be somewhere between the upper and lower level, usually indicated by crosshatch marking. Add oil to bring oil level to full mark. Small amount at a time. Most small vehicles only take about 3.5 to 4 liters.

Oct 31, 2009 | 1993 Suzuki Samurai

5 Answers

I don't know how much oil i need for an oil change


With oil filter you'll need 5 quarts. After changing oil and filter run briefly and check for leaks. Shut down the engine and check oil level is correct.
I hope this may have helped,
Tom

Oct 18, 2009 | 1993 Ford Probe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...