Question about 2005 Chrysler Town & Country

1 Answer

Unknown engine codes

The codes are unknown but mechanics anyone know what they are? V0155 V1100 orV110c V0140

Posted by on

  • Doug Smith May 11, 2010

    V is not a valid letter to start the code, it should be a p or c or b.You need to find out what the correct letter is.It could also be a U.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 114 Answers

The message you are getting are not V's but U's, they sometimes are hard to read what the letter is but here is your answers:

U0155 Lost Communication With Instrument Panel Cluster (IPC) Control Module

U1100 Invalid or Missing Data for Primary Id
U110C No Fuel Level Bus Message

U0140 Lost Communication With Body Control Module

Posted on Jun 21, 2008

  • jam939
    jam939 Sep 10, 2012

    I still had gas (maybe less than a quarter of a tank) when engine light went on and mechanic found this code. Is that when it goes on? Light went off by itself but can't remember if it was associated with gas refill. John

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Engine management light flashing. Mechanic s computer - no fault code detected. Now light off for few days and has come back on. Any ideas


Based on that, anyone who tells you they know what the problem is would just be 100% guessing.

2. The mechanics scan tool may not have picked up a code but that does not mean there is no fault code generated ready to be pulled up with the correct equipment. There are also some manufacturer specific codes for various models that many generic scan tools will not necessarily read.

3. I would take it to a dealer service center and have the fault code or codes pulled up and diagnosed as there will be something if the warning light is back on. Whatever fault codes are being generated, their equipment will pick it up.

Dec 14, 2015 | Cars & Trucks

1 Answer

I have a 2001 Mitsubishi montero sport xls model. My check engine light is on and I have a code number of P0715...does anyone know what that code means?


The code indicates the Input Turbine shaft speed sensor is giving an erratic signal or there may be a mechanical transmission issue. I would go with a new sensor. Try rockauto.com to purchase a new sensor, much cheaper than the dealer. Also see sketch of location of the sensor on the tranny.

25495758-jxuyvqlutvovh3pi1e50k1yy-1-0_0.png

Feb 28, 2015 | 2001 Mitsubishi Montero Sport XLS

1 Answer

My 07 vw passat fsi engine management light comes on intermittently sometimes the parking brake and the engine light Come on together then one goes off then the other the next day. for 3 days now my engine...


if you can read the faults then teh code reader should tell you ,if not then download OBDII codes from a torrent site as iam feeding .


P1479 Vacuum system, brakes - mechanical fault
P1403 EGR Flow Deviation

3089 is not showing in my VW code sheet

Dec 10, 2014 | Cars & Trucks

1 Answer

Have code p3202 coming up on my 04 jeep liberty


never heard of google. or an fsm ?
no engine stated
no transmission
dang that makes help hard, we are blind here, unlike you or your mechanic.

i look in my FSM and there is no P3 codes. so did Autozoned do this?
i see only one car showing that code
a Diesel Cummings.
Dodge Cummins Turbo Diesels.

surely you know what under the hood and what transmission is in the car.???

Oct 18, 2014 | 2004 Jeep Liberty

1 Answer

I bought my 2009 Accord brand new, it has been back to the dealer 5 times with the same problem which they cannot seem to fix. The car while driving suddenly starts to sputter and **** like its going to...


if the check engine light comes ,go to autozone or advance and let them tell you what code is setting in the computer. get code number and code description. it sound to me as if a coil or coil driver circuit is bad.

Aug 10, 2011 | 2009 Honda Accord

1 Answer

BRAKE LIGHTS GO ON AND OFF ON THEIR OWN--NO KEYS OR NO ONE IN THE CAR. MECHANIC SAYS THERE IS A DEFECT IN THE BRAKE LIGHT SWITCH AND IT HAS BEEN REDESIGNED. DOES ANYONE KNOW ABOUT THIS AND CAN I GET...


Mechanic could be right have your abs sensors checked . when car is running is the check engine light on? If so have it scanned and see what codes are there

Mar 11, 2011 | 2004 Mercury Mountaineer

1 Answer

**NEW** (End of paragraph) 2005 DODGE STRATUS 2.4L DOHC -X (problem-check engine light on-code:P0016-camshaft/crankshaft sensor) WHAT HAPPENED: TIMING BELT BROKE WHILE DRIVING UNDER 35 MPH. HAD A CHEAP...


Well what i know is when the timing belt breaks the Valves get bent for most of the time like 99% And i don't know if that Mechanic checked the valves or not because if they are bent then the valves wont close properly as it should and the car wont have power and the RPM will be low even if you accelerate. and what i can say is take your car to an autopart store Like Pep boys or autozone, and ask them to scan it and erase the code and see if it back again and they should scan it for free. Good luck

Jan 12, 2011 | Dodge Stratus Cars & Trucks

1 Answer

Unknown make of engine


generally the dune buggy was made by a volkswagen chassis and engines

Apr 15, 2009 | 2006 Toyota Camry

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

1,248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...