Question about 2002 BMW 7 Series

2 Answers

Car wont start. keyless remote will not work and will not lock in to start car. getting a caar symbol on top of a T like symbol. someone said it could be security system need to be reset. can anyone offer assistance please.

Posted by on

  • bgibson57 Oct 10, 2010

    I'n not sure what you mean with the numbers and the key dons't turn. The key remote has to be inserted and locked in and a press start button has to be pushed. The car locking mechanisum will not lock the key control in place and therefore not allowing the car to start.

  • bgibson57 Oct 11, 2010

    yes I am. the system reset the next morning but the keyless remote will not open the door but it will lock the door.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • BMW Master
  • 1,420 Answers

Welcome to FIxYa.com

ok we are going to have to do a simple test to reset the theft system.

0. Disconnect battery for ten mins before going to step one

1. Enter the vehicle and close the doors.

2. Using the key briefly (max 5 seconds) turn the ignition switch to position 1(KLR) and back off again.

3. Remove the key from the ignition; press and hold 2.

4. While holding down button #2, rapidly press button #1 three times in secession.

5. Release both buttons. If the key is equipped with an LED (#4) it will flash slowly for 10 seconds. The GM activates and releases the locks in secession to indicate that initialization was successful.



Regards, Lee Davidian


A Four Thumbs up ^^^^ is appreciated for answering your question. And please take the time to rate me by leaving a testimony. Thank you , Lee Davidian

Posted on Oct 10, 2010

  • 1 more comment 
  • Auto Repair Help
    Auto Repair Help Oct 10, 2010

    Sorry, in addition, reconnect battery then go to step one, Lee

  • Auto Repair Help
    Auto Repair Help Oct 11, 2010

    Are you in the US ? If so please relist, Lee Davidian so someone from the European can help you

  • Auto Repair Help
    Auto Repair Help Oct 11, 2010

    do you have the 745 i or li ?? Lee Davidian

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Is it possible to post a picture?

Thanks!

Posted on Oct 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Changed battery in keyless remote and now doesn't start car or open doors


  • HOW TO - Change the battery and quick fix your car remote ...

    ? 9:32
    https://www.youtube.com/watch?v=KzCXGXCe0oc
    Sep 1, 2011 - Uploaded by tyreeztt
    Also if your remote isn't working with a new battery please check out this ... TO - Change the battery and quick fix your car remote / keyless entry ...

    Remote Key does not lock / unlock doors after battery change ...

    www.6speedonline.com/.../208274-remote-key-does-not-lock-unlock-do...
    Apr 17, 2010 - After I changed the battery, it would no longer lock / unlock the doors. ... I can start the call and all .. its just the door and trunk lock / unlock function that does not seem to work . ... now your fob is learned... the keyless entry goes into a "sleep" mode to preserve the batt.. if u do not use the ... Still don't work .

    how do i reprogram my lock remote to my car? i changed my ...

    www.cargurus.com > Questions > Hyundai > Tiburon

    CarGurusAug 17, 2009 - i change my battery an now my lock an un lock buttons dont work on my remote how o i reprogram it? ... I have a Hyundai 2003 Tiburon, and the followingworked for me, get ... However for a replacement keyless remote fob, you will have to go to ... And no, they don't do it for free (ranges from $30-$50 in my ...

    Top 5 Tips in Fixing a Keyless Remote ' eBay

    www.ebay.com > ... > Safety & Security > Keyless Entry Remote / Fob
    Key fobs that don't permit entry can be a major hassle for drivers, but fortunately, there... Drivers with a bit of basic electronics experience are often able to replace their ...After confirming that a remote is faulty, try replacing its battery. ... like "Jeep Wranglerkeyless remote," to find listings that will work with specific vehicles.

Jan 26, 2016 | 2005 Ford Freestyle

1 Answer

I cannot program my keyless remotes


if the fob is not for mercury it wont work make sure when buying that it is compatible with your car make and model, look online for instruction how to program your fob keyless remote.
  1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN. Door locks will cycle to confirm programming mode.
  2. Within 20 seconds, press any button on first keyless remote. Door locks will cycle to confirm programming.
  3. Within 20 seconds press any button on second keyless remote. Door locks will cylcle to confirm programming.
  4. Turn ignition to OFF

Mar 16, 2014 | 1997 Mercury Tracer

1 Answer

Toyota tacoma keyless remote and key locks not working. (Automatic locks work inside)


maybe fob is damaged, and wont open with key as it may be worn , do you have a spare key to try.

Feb 02, 2013 | 2007 Toyota Tacoma Double

1 Answer

I want to add a keyless entry to my 1996 Ford Explorer XLT 2WD 4.0L and also a remote start. It does not have any type of remote for the vehicle right now I.E. alarm system. Is it possible to do a remote...


This is possible with almost any vehicle, especially ones with power locks. I installed keyless entry on someone car before on my own. Took about 3 hours or just take it to a local shop. Its a pretty easy install for anyone who is mechanically inclined.

May 06, 2011 | 1996 Ford Explorer

1 Answer

How can i start my car without Remote keyless entry?


Use the driver's door key cylinder> Lock and unlock the car with the key after all doors are closed and this should solve the problem. If not, then it has nothing to do with the RKE Transmitter.

May 03, 2010 | 2006 Pontiac G6

2 Answers

Keyless Remote Won't Work - But Car Starts


The remote receiver unit is located in the rear view mirror. This may be faulty. Since the car is new (less than a year?) you still may have the factory warranty.

Jan 16, 2010 | 2009 Volvo S40

1 Answer

My keyless remote for my 2000 jeep grand cherokee wont unlock the


go to autozone and use the remote tester on the counter to make sure that the remote itself is functioning or not, could be a dead battery. On some vehicles it is possible to reset the keyless entry by turning the ignition switch from off to run (right before the starter activates) 3 times or so, if you try this and the door locks activate then press the lock button on your remotes. good luck

Jun 03, 2009 | 2001 Chevrolet Blazer

2 Answers

Honda Accord doors lock and unlock randomly


I have the same problem.My Accords door unlock when I am turning left above a certain speed.Have you been able to resolve the problem?

May 31, 2009 | 2003 Honda Accord

1 Answer

Keys do not open doors just the keyless remote


Sounds like someone replaced the ignition. The vibe uses one key for all locks and if you replace just one the key wont work. you might see if the dealer can get a factory replacement from the factory key code. you will need to get a new key with the factory code as well but this should solve the problem.

Apr 20, 2009 | 2003 Pontiac Vibe

2 Answers

My remote for the keyless entry does not work.


does trunk button work? panic button?
here's 2003 info:


  • The doors do not lock/unlock using the remote transmitter
  • Remote transmitter.
  • Driver door module (DDM).
  • Go To Pinpoint Test G .

SECTION 501-14: Handles, Locks, Latches and Entry Systems 2003 Town Car Workshop Manual
GENERAL PROCEDURES Remote Transmitter Programming
  1. Cycle the ignition from OFF to RUN four times within three seconds. The locks will then lock and unlock, confirming that the program mode has been entered.
  1. NOTE: When the first keyless entry remote transmitter is programmed, all other keyless entry remote transmitters are erased.
    Press any button on the transmitter to be programmed.
  1. If additional keyless entry remote transmitters are to be programmed, repeat Step 2 within 7.5 seconds.
  1. To exit program mode, turn the ignition to START or wait 7.5 seconds.
--------------------------------------------------------------
report back

Mar 22, 2009 | 2004 Lincoln LS

Not finding what you are looking for?
2002 BMW 7 Series Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...