Question about Dodge Dakota

Open Question

Where is the pcm fuse on a 1989 dodge dakota - Dakota Dodge Cars & Trucks

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mcrwriter
  • 2 Answers

SOURCE: How to change an alternator belt on a 1989 Dodge dakota 3.9L?

Raise up on the tensioner to remove the belt. there shouold be a routing schematic on the fan shroud. If not draw one before removing the old belt. That's pretty much all you have to do....or at least thats the easiest way for me

Posted on May 05, 2009

zaldyboy01
  • 293 Answers

SOURCE: 1994 dodge dakota automatic shut down relay not

Replace the relays with a new one and you'll see. ok.

Posted on Jan 01, 2010

  • 1075 Answers

SOURCE: brake fuse in 96 dodge dakota

on the main fuse board inside the car.adrian,,,

Posted on Jul 06, 2010

  • 2 Answers

SOURCE: WHERE IS THE PCM ON A 98 DODGE DAKOTA

The PCM is located on frame rail behind the air breather

Posted on Sep 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble after replacing PCM on Dodge Dakota.


Yes the warning lights on the insturment cluster should lite when you turn the key to on . You know ,check engine light , ABS , air bag ,the cluster gauges should also do a sweep test . Does the vehicle have a anti-theft system ? The new PCM would have nothing to do with the lights . Try turning on the headlamps , do they work ?

Jul 17, 2017 | Dodge Cars & Trucks

1 Answer

I need a diagram of the bracket positions & mounting of the Power Steering pump for a 1989 Dodge Dakota 2wd - 4cylinder 2.5


Yes there is complete guide available for power steering pump and bracket positions mounting.Its will all details and diagram and lot more details.Please click on link below.Check the details http://technoanswers.blogspot.com/2011/03/1989-dodge-dakota-2wd-4cylinder-25.html ------------------ In this link is complete guide for steering and suspension of 1989 Dodge Dakota 2wd - 4cylinder 2.5------------------ This should help. Thanks.Helpmech.

Mar 29, 2011 | 1989 Dodge Dakota 2WD

1 Answer

I have a 1989 dodge dakota sport and im not getting any spark at the plugs ive changed the coil, distributor cap,rotor button and still no spark and changed the stater any help?


check your fuses or your timing is off if your timing is off get your timing light if that dont work and is the motor even cranking over

Jan 09, 2011 | 1989 Dodge Dakota 2WD

1 Answer

Firing order 1989 dodge dakota


1989 Dodge Dakota 3.9 liter V-6 VIN "X"

1fa2d88.gif

Hope helps (remember rated and comment this).

Aug 16, 2010 | 1989 Dodge Dakota 2WD

2 Answers

Turns over good, no spark, no fuel, will not start


usually when you have both no spark or fuel its the crank sensor which is located at the top of the transmission bell housing.

Mar 14, 2010 | 1989 Dodge Dakota 2WD

1 Answer

1993 dodge dakota fuse for headlights where is it


The fuse panel box is to the right of the glove box with the glove box door opened or beneath the instrument panel (dashboard) on 1989-93 models. For 1994-96 Pick-ups, it is beneath the knee blocker panel.

For Headlights check Fuse 20Amp.

Dec 11, 2009 | 1993 Dodge Dakota

1 Answer

Where is the asd relay on my 1990 dakota?


ASD is in the engine compartment fuse block.

The pump relay should be there also. Check your fuse panel in the truck though.

Fuses, Relays & Circuit Breakers The fuse panel box is to the right of the glove box with the glove box door opened or beneath the instrument panel (dashboard) on 1989-93 models.

2d26fdd.gif
Pull out the fuse panel for access to the blade type fuses

Oct 18, 2009 | 1990 Dodge Dakota

1 Answer

The blower motor in my 1989 Dodge Dakota suddenly stopped working. Will not blow anything on any speed or on hot or cold!


Have you checked for a blown fuse first. There are two fuse control panels - one under the driver's dash board and one in the engine compartment. The one in the engine compartment should have the blower fuse. If the fuse is good, check the blower relay (this is also in the engine compartment). The cover to the fuse box has a diagram of the fuse locations and descriptions. "BLWR" is usually used for blower.

May 04, 2009 | 1989 Dodge Dakota 2WD

1 Answer

Engine won'tstart


you need a pcm/ecu/ecm (computer) i did the same thing and it fried the computer

Dec 17, 2008 | 1990 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...