Question about 1995 Dodge Dakota

1 Answer

Will not spark new pickup coil c - 1995 Dodge Dakota

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 84 Answers

Check the crank sensor located on the bell housing. If this is faulty you will not get a spark at all.

Posted on Oct 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 toyota pickup won't strat have power to coil and flue pump works no spark at the plug


Do you have spark from the coil. Pull the plug off the distributor and check for spark. No spark replace the coil.

Oct 15, 2016 | 1992 Toyota Pickup

1 Answer

I have a ford ranger 1986 ive replaced plugs,wires, coil, cap, rotor button and still i have a orange spark could it be the pickup coil


Color of spark is a kinda age-old test, but it doesnt necessarily mean anything. Some cars you will usually see orange during a cranking spark test because the resistance of the system and the coil windings reduces voltage below the "blue" spark level until voltage gets over 14v, which doesnt happen until the engine is running.

If the car runs at idle and rev, it is unlikely its the pickup coil. The pickup is the RPM sensor, pretty much it either works OK or works terribly/not at all (though sometimes they are funny, its rare). If it runs fine for awhile, then after 30 minutes it starts to cut out or stall, and when it cools it runs again, THAT is pickup coil type of failure, but not yellow spark. Pickup doesnt make spark or affect its quality in any way. It simply says WHEN to make spark. After it signals WHEN, the module and coil and source voltage determine how much is made.

If you still think you have low spark issues, id test it with a test plug. Its an adjustable or fixed gap spark plug you can buy at a parts house. You need minimum 25kv consistent spark from the coil.(30 is better). What that means is you hook a work from the cap to the spark tester, and with the engine running it will fire regular sparks and not skip any. If it does...spark is not your problem. Period. If it doesnt, then you start checking wires, resistance, voltage, etc.

Nov 15, 2015 | Ford Cars & Trucks

2 Answers

I have a 1987 chevy S10 4x4 xcab pickup . it just died one day i rebiult the TBI and put a new computer in it and new coil in . Have checked all the fuses . and it will not start .do you know what i


Check if you have spark (coil or ignition problem) Next consider what you did when rebuilding the TBI as there may be parts that will only operate in one way or settings that have to be adjusted. Lastly is the new ECM compatible with the system (immobiliser) Use a scanner to reset the ecm program

Nov 22, 2014 | 1987 Chevrolet S-10 Pickup

2 Answers

No spark at coil or distributor


I would buy a book with the procedure to troubleshoot the ignition system. The problem could be the pickup coil in the bottom of the distributor among other things. The module uses the pickup coil to know when to fire the plugs. The computer only controls when the cylinders fire.

Jul 21, 2013 | Cars & Trucks

1 Answer

My 200 1500 with 4.6 wont get spark checked cps its fine put in a new coil and pickup still no spark


Check wire feeding for the file should be 12 volts is received


Measure the ohms on the secondary winding wire 2 - 3 or 1-4



Color sparks out of the blue wire coil

Jun 15, 2012 | 2000 Chevrolet Silverado 1500

1 Answer

No spark Power to coil New wires and new coil


Usually the ignition controll module or pickup coil. Your local auto parts store should be able to test the module for you.

Nov 05, 2009 | 1986 Volkswagen Golf

1 Answer

No spark think I need a new coil 91 Ply Colt


Yes you probably will need a new one, but try to check on the crackshaft positioner sensor or the pickup coil on the ignition/

Jul 08, 2009 | 1991 Plymouth Colt

1 Answer

No spark


Use a test light on negative side of coil. Should pulse while cranking. No pulse. check pickup coil same way. If pickup is good the install a new coil.

Mar 29, 2009 | 2000 Dodge Caravan

Not finding what you are looking for?
1995 Dodge Dakota Logo

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...