Question about 2003 Mitsubishi Outlander

2 Answers

What is the timing belt sequence for a 2003 mitsubishi outlander

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 1,420 Answers

Welcome to FIxYa.com

what is the timing belt sequence for a 2003 - 1dc06d8.png


Regards, Lee Davidian


A Four Thumbs up ^^^^ is appreciated for answering your question. And please take the time to rate me by leaving a testimony. Thank you, Lee Davidian

Posted on Oct 11, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 869 Answers

Timing belt sequence can be easily found in user manual.

Posted on Dec 29, 2010

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

tsolinac
  • 28 Answers

SOURCE: What mileage do I need to replace a 2003

60,000 Miles - it's a belt and it's an interference engine!

Posted on Feb 27, 2010

reisdos
  • 1297 Answers

SOURCE: I need torque specs and bolt tightening sequences

what bolt specs do you need?

Posted on Sep 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 outlander acted like the timing belt has slipped but eventually it starts. When we finally get it running is acts like it will die then it finally will runbut not good.


timing belts are toothed belts and do not slip
next if it was to get out of time it would never start
so run the fault codes and check for problem crank/cam position sensors

Feb 17, 2018 | 2003 Mitsubishi Outlander

1 Answer

Does a 2003 Mitsubishi Outlander have evasive valves?


Sohc or dohc, both are interference engines. If the timing belt broke or slipped more 45 degrees, Leave it alone. The engine is trashed.

Oct 18, 2016 | 2003 Mitsubishi Outlander

1 Answer

Where is the crank sensor located on a 2003 Mitsubishi


Remove the lower timing belt cover.
Remove timing belt cover bracket.
Remove crank sensor.

Jan 02, 2015 | 2003 Mitsubishi Outlander

2 Answers

How important is it to change the timing belt on a 2003 Mitsubishi Outlander every 100 000KM ?


it is very important, if the belt fails it will severly damage the engines valves and this repair will cost $1000's

Jul 30, 2010 | 2003 Mitsubishi Outlander

1 Answer

Diagram to replace serpentine belt for 2003 outlander


try these websites drive belt diagram www.webcrawler.com and www.alldatadiy.com and for the most part there shoulld be a diagram under your hood showing you how to put the new belt on.

Jun 21, 2009 | 2003 Mitsubishi Outlander

1 Answer

Outlander is rattling and engine makes rumbling sound


"...makes a rumbling sound." Since you changed the head gasket, I suspect that you did not align the balance shafts correctly. There is a specific and mandatory sequence to setting up the 4G64 timing belts so the lower (oil pump) and upper balance shafts are correctly synced.

Get it wrong and the engine vibrates, often around 2500 rpm and higher.

You will have to set the engine to Top Dead Center, pull the cam covers off again, disconnect the tensioners, remove the belts, and realign the balance shafts correctly.

Jan 15, 2018 | 2003 Mitsubishi Outlander

1 Answer

Cam Belt on Outlander 2.4 litre Petrol - 2004


The vehicle has a belt and should be changed every 60,000 miles.

Dec 08, 2008 | 2004 Mitsubishi Outlander

Not finding what you are looking for?
2003 Mitsubishi Outlander Logo

Related Topics:

869 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...