Question about 1993 Ford Crown Victoria

2 Answers

I have a 93 crown vic that will start and idle but when u take off it only goes about 1 min then starts missing really bad then wont take fuel and dies u have to let it sit a while then it will run for a min. again whats wrong?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 1993 ford crown vic an its not fireing or gettin fuel an i dnt have power coming out the crank sensor what can i do or should i check to get power i replace the sensors an relays

Posted on Jun 08, 2013

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Try changing the fuel pump relay...its on the driver side fuse box near the brake line

Posted on Oct 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 ford crown vic hesitates and wants to die on acceleration, It idles fine but when i press the throttle it dies. Now the mechanic wants to charge me for a new wire harness and computer?


Find another mechanic.. First, if the harness is bad, it is almost impossible to diagnose a bad computer. I diagnose cars. I start with power and grounds first. Then check wires for continuity. Check sensor and actuators for resistance. I get 1 hour to do this. Usually do it. Sometime the harness is bad. it requires more time. Being a ford... I would start with cleaning the maf sensor and the throttle body. Look at replacing the fuel and air filter.

Nov 12, 2016 | 2004 Ford Crown Victoria

1 Answer

I have a '97 4.6 ford crown vic. Only starts up when i apply gas n dies when i let off the pedal any ideas?


Most likely the Idle Air Control Motor, but you could have other issues suck as a leaking fuel pressure regulator, bad EGR valve, or massive vacuum leak.

Dec 01, 2014 | 1997 Ford Crown Victoria

1 Answer

1999 ford crown vic won't start. changed fuel


Maybe your problem is with the one or many injectors, if just one is bad, you will have problems. Get yourself a multimeter and set it to read in ohms and find what spec the injectors should be at. If out of spec, then you need to replace that one injector(s).

Mar 25, 2013 | Cars & Trucks

1 Answer

1997 Crown Vic. Will crank, but will not idle.Have to keep foot on gas.


have a 97 crown vic,
in warm weather it idles fine and run fine
now that its cold I have to hold at high idle to have warm up
for about 10 mins.
if I just start it the engine will die with out me holding on foot on the gas

Feb 18, 2011 | 1997 Ford Crown Victoria

2 Answers

I just purchased a 93 Crown Victoria with the 4.6 litre V8. It idles ok but bucks under any acceleration...misses badly. To the point where I went over an overpass and begin losing speed. All the spark...


your problem is not wire location, it sounds like bad wire or wires, also those engine are pron to bad coils,but i think you should start with wires,also check fuel filter or just replace if you can check fuel preasure.hope this helps.

Oct 10, 2009 | 1993 Ford Crown Victoria

1 Answer

I have been fighting a no start issue on my 00 crown vic.


I hope you have replaced the fuel filter. Every 30000. I took the one off my moms Vic.and we could not blow through it.
I hope this helps you.

Oct 06, 2009 | 2000 Ford Crown Victoria

2 Answers

My 1993 crown vic has trouble idleing properly when first started in the morning, either in the winter or the summer. Also if i try to take off real quick after the first start it laggs and runs really...


You may want to check the Vacuum lines if there are leaks. Check also Fast Idle Thermo Valve, which controls the idling at cold starts. If you have a carb, check the idle up valve.

Jun 03, 2009 | 1993 Ford Crown Victoria

2 Answers

1992 crown vic 4.6l


did you check the inertia switch?? that's what happened to mine

Jul 25, 2008 | 1992 Ford Crown Victoria

Not finding what you are looking for?
1993 Ford Crown Victoria Logo

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...