Question about Chevrolet Cavalier

1 Answer

Where is the thermostat located on a 1995 Cavalier 2.3 lt?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 8,174 Answers

See instructions below from autozone.com. Also, please see my tip at http://www.fixya.com/cars/r5929960-s_thermostat .

2.3L and 2.4L Engines

See Figure 7
When adding coolant, it is important that you use GM Goodwrench DEX-COOL® (orange colored, silicate free) coolant meeting GM specifications. On these vehicles, if silicated coolant is added to the system, premature engine, heater core or radiator corrosion may result. In addition, the engine coolant will require change sooner; at 30,000 milee or 24 months.

  1. Disconnect the negative battery cable.
  2. Properly drain and recover the coolant to a level below the thermostat.
  3. Unfasten the cover-to-outlet pipe bolt, which is accessible through the exhaust manifold runners.
  4. Raise and safely support the vehicle.
  5. Disconnect the radiator and heater hoses from the outlet pipe.
  6. Unfasten the outlet pipe-to-oil pan bolt and the cover-to-outlet pipe bolts.
  7. Remove the thermostat, then clean the old gasket material from the mating surfaces.

where is the thermostat located - 88761eb.gif


Fig. Fig. 7: Thermostat removal and installation-2.3L and 2.4L engines

To install:

  1. Position the thermostat in ite correct location, then install the cover-to-outlet pipe bolt. Tighten the bolt to 10 ft. lbs. (14 Nm).
  2. Install the outlet pipe-to-oil pan bolt. Tighten the pipe-to-oil pan bolt to 19 ft. lbs. (26 Nm) and the pipe-to-transaxle bolt to 40 ft. lbs. (54 Nm).
  3. Connect the radiator and heater hoses to the outlet pipe.
  4. Carefully lower the vehicle.
  5. Install the cover-to-outlet pipe bolt through the exhaust manifold runner.
  6. Properly fill the cooling system, then connect the negative battery cable.

Posted on Oct 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does a 1994 Chevrolet cavalier have 2 thermostat?


One thermostat, located at the end of the upper radiator hose.

Nov 06, 2010 | 1994 Chevrolet Cavalier

2 Answers

Can't find the oil filter for my chevy cavalier 2005


Your oil filter is located on the right side underneet the power steering oil. Its a black cap with a square notch on it to remove it.

Hope helps (remember to rate and comment this).

Sep 14, 2010 | 2005 Chevrolet Cavalier

1 Answer

I'm looking for the firing order for the spark plug wires in an 01 cavalier L4 2.2


For the 2001 Chevrolet Cavalier 2.2L In-Line 4-Cylinder:

Firing Order:
1-3-4-2

Cylinders:
.........(back).........
|...1....2....3....4...|
..........(front)
Ignition Coil Connections:
...(back)
.o <--4
..O o <--1
.........o <--3
...........O o <--2
....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com

Aug 06, 2010 | 2001 Chevrolet Cavalier

1 Answer

Need diagram for firing order on a 1995 chevy cavalier 2.2


For the 1995 Chevrolet Cavalier 2.2L DOHC In-Line 4-Cylinder:

Firing Order:
1-3-4-2

Cylinders:
.........(back).........
|...1....2....3....4...|
..........(front)
Ignition Coil Connections:
...(back)
.o <--4
..O o <--1
.........o <--3
...........O o <--2
....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 15, 2010 | 1995 Chevrolet Cavalier

1 Answer

WHATS THE FIREING ORDER ON A 1996 CHEVY CAVALIER


For the 1996 Chevrolet Cavalier 2.2L DOHC In-Line 4-Cylinder:

Firing Order:
1-3-4-2

Cylinders:
..........(back)..........
|...1....2....3....4...|
..........(front)
Ignition Coil Connections:
...(back)
.o <--4
..O o <--1
.........o <--3
...........O o <--2
....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 11, 2010 | 1996 Chevrolet Cavalier

1 Answer

SPARK PLUG DIAGRAM 2000 PONTIAC BONNEVILLE


For the 1995 Pontiac Bonneville 3.8L:

Firing Order:
1-6-5-4-3-2

Cylinders:
.......(back).......
|...2....4....6...|

________________
|...1....3....5...|
.......(front)

For the Coils:
(back)
....6
....3
....2
....5
....4
....1
(front)

For this Type Coil (Solid One UNIT):
(back)

_____
|....o| <---6
|O....|
|....o| <---3
|....o| <---2
|O....|
|....o|
<---5
|....o| <---4
|O....|
|....o| <---1
(front)

For this Type Coil (3-Section UNITS):
(back)
______
|....o.| <---6
|O.....|
|....o.| <---3
_____
|....o.| <---2
|O.....|
|....o.| <---5
_____
|....o.| <---4
|O.....|
|....o.| <---1
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 28, 2010 | 1995 Pontiac Bonneville

1 Answer

Replace thermostat on 97 cavalier?


GM Cavalier/Sunfire 1995-2000 Repair Guide

Thermostat - REMOVAL & INSTALLATION

2.2L Engine
(see Figures 1, 2, 3, 4, 5 and 6)


0900c1528003cd07.jpg Fig. 1: The thermostat is located in the lower radiator hose on the 2.2L engine


0900c1528003cd08.jpg Fig. 2: Remove the two retaining bolts for on the housing


0900c1528003cd09.jpg Fig. 3: Separate the housing halves to access the thermostat


0900c1528003cd0a.jpg Fig. 4: Pull the thermostat out to remove it from the housing


0900c1528003cd0b.jpg Fig. 5: The thermostat has an O-ring which goes around the center


0900c1528003cd0c.jpg Fig. 6: Thoroughly clean the mating surfaces of the thermostat housing
When adding coolant, it is important that you use GM Goodwrench DEX-COOL® (orange colored, silicate free) coolant meeting GM specifications. On these vehicles, if silicated coolant is added to the system, premature engine, heater core or radiator corrosion may result. In addition, the engine coolant will require change sooner; at 30,000 miles or 24 months.
  1. Disconnect the negative battery cable.
  2. Properly drain and recover the coolant until the level is below the thermostat.
  3. Unfasten the coolant outlet-to-inlet manifold attaching bolt and nut, then remove the outlet.
  4. Remove the thermostat. Clean the inlet manifold and outlet mating surfaces.

To install:
  1. Install a new O-ring onto the thermostat
  2. Place the thermostat in the inlet manifold.
  3. Attach the coolant outlet to the inlet manifold, using the bolt and nut. Tighten to 89 inch lbs. (10 Nm).
  4. Refill the engine cooling system.
  5. Connect the negative battery cable, then start the engine and check for coolant leaks.

Hope this helped (remember comment and rated this).

Apr 05, 2010 | 1997 Chevrolet Cavalier

1 Answer

Im not sure of the correct firing order for a 93 chevy cavalier 2.2 litre and how are the spark plugs numbered from left to right 1-2-3-4 and how are the distributor posts numbered from top to bottom...


For the 1993 Chevy Cavalier 2.2L:

Firing Order:
1-3-4-2

Cylinders:
........(back)
1......2......3......4
........(front)

Ignition Connections:
........(back)
.....o <------4
.....O..o <-------1
.......................
.............o <--------3
.............O..o <---------2
.........(front)

Let me know if this helped, or if have additional information or questions. Feel Free to contact me at FixYa.com!


Mar 23, 2010 | 1996 Chevrolet Cavalier

2 Answers

I need to replace a throttle body sensor on a 2002 cavalier


IT IS SIMPLE
FIRST RELIECE THE FUEL PRESSURE AT SCHRADER VALVE ON THE FUEL LINE.
DISSCONNECT ALL ELECTRICAL PLUGS
DISSCONECT 2 CABLES<< SOMETIMES 1 CABLEREMOVE FUEL AND VACUUM LINES & HOSESTHEN REMOVE THE 4 MOUNT BOLTS,<<<.>> THEN THROTTLE BODY

Sep 17, 2009 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,083 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...