Question about 1994 Geo Metro

2 Answers

Clutch won't release (or engage) although is running and vehicle in first gear

Posted by on

  • farley1954 Oct 09, 2010

    Would a bad speed sensor have any affect on it?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Expert
  • 2,973 Answers

The clutch pedal linkages need adjustment.The linkages have become so loose that when you press fully the action does not reach the clutch plates and hence you can not come out of first gear. So please have it adjusted/tightened.

Posted on Oct 10, 2010

First thing to check is the clutch cable, make sure it is adjusted properly. If your clutch cable is ok, then you will need to replace the throwout bearing. To replace that part, the transmission needs to be separated from the vehicle

Posted on Oct 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Clutch disc and Release Bearing for the TD4-Freelander, were replaced recently. The Pressure Plate was still in a good condition.Gears difficult to engage.Please advise.Tks.John.


Most likely still has air in hydraulic clutch slave system. Many transmisions will have dificulty shifting if clutch doesn't full disengage. If air is in system it won't allow full disengage thus difficulty in shifting even possible grinding gears

Sep 17, 2016 | 2002 Land Rover Freelander

2 Answers

Drive train locked up while driving in 5th gear. Vehicle would not move unless clutch was engaged will in neutral.


Hi Tom:
If you're lucky, a linkage has become disengaged. Trace from the gearshift to the transmission.
What happens to the gearshift lever when you try to shift?
If it won't move and the linkage is not disconnected, try to manually move the shift levers where they enter the trans.
Also if you have a custom shifter it is possible that a pin has slipped.
Have fun chasing this one.

Mar 20, 2015 | 1990 Ford Bronco II

1 Answer

Mitsubishi sigma 1984 clutch has pressure but not engaging as I can't select gears unless cars turned off?


although clutch may feel like it is engaging i suspect the pressure plate is worn ,if you try to engage gears with engine running is there a grating noise ?

Mar 31, 2014 | Cars & Trucks

1 Answer

My 1998 Honda civic ex won't move but the motor


Have you just replaced the clutch? Taken out the transaxle, and put it back in? Are you sure transmission was in good condition before this? If so, review your procedure carefully to be sure you got it all back right.
Watch the slave cylinder while someone depresses clutch. You should see the little plunger move slightly out and move the clutch lever back. The lever moves the release bearing inside bell housing into contact with the pressure plate. If slave cylinder doesn't move at all, try bleeding again. The plunger has to move when clutch is engaged.
I'm not sure what you mean by "will shift but won't go into gear". You mean it's actually going into a gear position and car won't move? Or it won't go into any gear, period. As if you had no clutch?

Nov 06, 2011 | 1998 Honda Civic

1 Answer

I am having a gear shifting problem with my Kia Sportage (4x4 Gasoline engine, 2009 version). taking off from an incline drive it is difficult to shift from first to second gear (grinding noise). Also...


Check your clutch fluid box located by your breaks master cylinder. Your clutch works like your breaks in that when you press the clutch pedal it uses hydraulics to disengage your clutch plate. If it's low or not working properly your clutch plate won't fully disengage and could lead to more problems.

May 27, 2011 | 2000 Kia Sportage

1 Answer

How do can you roll start a 86 samurai


Engage two wheel drive. Switch on the ignition. Pull out the choke? Engage second gear and release the hand brake. Depress the clutch pedal and get the vehicle up to about 6-8 mph. Release the clutch and the engine should be turned by the rotation of the wheels - and hopefully start. Once the engine has caught, depress the clutch and keep the engine running in the normal manner.

May 17, 2011 | 1986 Suzuki Samurai

2 Answers

Not sure if shifter is installed properly


Ok, I guess its going to be a not too obvious solution then. All we have to do is find it...
1.What type of gear shifter is in your truck. Column or tower
2. Is the tail shaft turning when you try to move the vehicle
3. Does the vehicle try to move at all
4. Is there any noise from the gearbox or clutch area
5. Are you certain the clutch kit was the right one
6. Did you try the clutch plate on the gearbox input shaft spline
7. Is the release bearing clear of the pressure plate fingers.
8. Does the release bearing carrier slide freely on the retainer on the front of the bearbox, and did you apply lubricant here.

Mar 26, 2010 | 1987 Ford Ranger

1 Answer

Ford focus slow at take off


clutch slipping change the clutch

Jun 10, 2009 | 2002 Ford SVT Focus

4 Answers

Car will not drive, is it clutch or cabel


my daewoo lanos wont shift into gear/s while running even when clutch is depressed all the way

Nov 12, 2008 | 2001 Daewoo Lanos

Not finding what you are looking for?
1994 Geo Metro Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...