Question about 2002 Mercury Villager
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Location of the spare tire and tools
The spare tire and tools for your vehicle are stowed in the following
Spare tire Under the vehicle, just forward of
the rear bumper
Jack assembly Under the third row bench seat in
the tool bag
Removing the jack and tools
1. Lift the 3rd row seat cushion.
2. Remove the jack assembly from the bag under the seat.
Removing the spare tire
1. Open the liftgate, locate the U-shaped slits in the carpet, and flip up
the piece of carpet to expose the hex nut.
2. Insert the lug nut wrench on the
hex nut in cargo floor.
3. Turn the wrench
counterclockwise until tire is
lowered to the ground and the cable
is slightly slack.
4. Remove the retainer from the
spare tire. It may be necessary to
lift one end of the tire to disengage
Posted on Jul 12, 2009
it is a bit of a time consuming job it would be best to get a diagram to see where everything goes as this will help you alot otherwise take to a mechanic.
any feedback left would be great
Posted on Jul 01, 2008
We have a 1997 Mercury Villager. I don't know how different it is from ours. We cannot remove the back seat. We can remove the middle seat and slide the back seat forward. I hope this helps.
Posted on Jul 06, 2008
make sure handbrake is off take wheel off hit the drum with a mallet not steel,as it will brake,hit on outter diametter face of drum, try and rotate as you twist off
Posted on Jan 05, 2009
Behind the brake mounting plate there is a small hole with a rubber plug on the top portion.
Remove the plug. Look from the back of the vehicle and you will see a star wheel in the hole. Stick
a long skinny screw driver with a large blade and rotate it in the direction of risistance.(clockwise).
You will hear a spring poping noise. Rotate a few times and the drums will turn freely.
Then you can slide the drums off.
Posted on Jul 04, 2009
Tips for a great answer:
Oct 29, 2016 | Mercury Cars & Trucks
Dec 17, 2015 | 2002 Mercury Villager
Mar 26, 2015 | 2002 Mercury Villager
Feb 15, 2015 | 2002 Mercury Villager
Dec 19, 2012 | 2002 Mercury Mountaineer
Dec 10, 2012 | 2002 Mercury Villager
Sep 03, 2012 | 2000 Mercury Villager
Jun 22, 2010 | 1998 Mercury Villager
Mar 29, 2010 | 2002 Mercury Villager
226 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: