Question about Ford Focus

Open Question

I inspected my ford focus st 2006 2.3L and i got this code P2004 intake manifold runner control stuck open bank, and i was wondering if you guys could help out with this problem. Maybe you could give me a website, or simple instructions to solve this problem. thanks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 218 Answers

SOURCE: Check engine light came on

THERE IS A VALVE ON THE RIGHT SIDE OF THE INTAKE MANIFOLD THAT OPEN THE RUNNER.IT HAS A VACUUM LINE TO IT.FOR IT TO BE STUCK OPEN EITHER THE SOLENOID IS BAD,THE VACUUM LINE IS BAD OR THE RUNNER IS GUMMED UP WITH CARBON AND STUCK OPEN

Posted on May 15, 2009

Ad
  • 449 Answers

SOURCE: ENGINE LIGHT ON SLIGHT LOSS OF POWER AND POSSIBLE RATTLE

p2004 (Intake Manifold Runner Control Stuck Open)You need to take a look at the IMRC actuators on the intake manifold. You can try using a screwdriver or other tool to move the actuators to see if one is stuck in the open position. Do not use your fingers to do this, because if one is open and decides to close it has a bit of force behind it and can injure you. If the IMRC is stuck open, it is usually due to deposits in the intake manifold. Repair involves removing the upper intake manifold and cleaning out any deposits in the IMRC plate area. I would try running some Techron Concentrate in 2 tanks of gas to see if it dissolves enough of the gunk on the plates to free up the stuck one. Certainly a lot cheaper than having to pull the intake manifold and cleaning the plates. Always run tier one gasoline like Shell or Chevron to reduce the buidup of deposits.

Posted on Dec 19, 2008

  • 1114 Answers

SOURCE: Mazda 3, 2004 has check engine light code P2004

bank 1 is O2 sensor mate!

Posted on Jan 04, 2009

  • 14036 Answers

SOURCE: 1998 ford windstar 3.8 with code p1538. Is this a

LOOKING IN CODE BOOK.POSSIBLE CAUSE TO YOUR PROBLEM THE IMRC COULD BE STUCK OPEN.OR THE IMRC ACTUATOR IS DAMAGED OR HAS FAILED.ALSO THE IMRC MONITOR SIGNAL CIRCUIT COULD BE SHORTED TO POWER GROUND OR SHORTED TO SIGNAL GROUND RETURN.

Posted on Oct 23, 2009

  • 1 Answer

SOURCE: water leak under the intake manifold,1995 toyota 4 runner

There is a heater core bypass pipe that runs from the block (under the manifold) to the bacl of theengine where you will see a flat rectangular "sheet metal" thing with a pipe coming out of it. The a rubber hose connects. You need to pull the top air plenums and intake to get to it. The p[ipe flange bolts to the block with silicone rtv as a sealant.

Posted on Nov 27, 2009

Testimonial: "thanxs"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DTC P2004. What do the letters vpwr mean?


Code 2004

Intake Manifold Runner Control Stuck Open Bank 1
Read more: http://www.autocodes.com/search_codes.php?q=p2004#ixzz44V8nd7Zu
VPWR means battery voltage / power.

Mar 31, 2016 | 2003 Ford Focus

1 Answer

2003 ford focus 2.3 litre DTC P2004 intake manifold runner control stuck open. What does it mean when it says shorted to VREF or signal circuit shorted open or shorted to VPWR.


code p 2004 refers to intake manifold air control actuator bank 1--actuator stuck open===causes --wiring--intake manifold air control actuator---mechanical fault
it also refers to intake manifold air control solenoid bank 1--solenoid stuck open=== causes --wiring---intake manifold air control solenoid---mechanical fault
reference auto data technical fault codes
I cannot find reference to the VREF or VPWR as they may be referenced in a ford workshop manual so you may have to ask a ford service person what they stand for but I suspect that they will come back to the same thing as listed in the causes

Feb 19, 2016 | Ford Cars & Trucks

2 Answers

2008 dodge avenger code p2004


Intake Manifold runner control stuck open - bank one:
- Intake Manifold Runner Binding Or Sticking
- Faulty Manifold flow valve
- Manifold flow valve harness is open or shorted
- Manifold flow valve circuit poor electrical connection

There is a factory service bulletin for this problem for 2007-2008 Dodge Avengers. (JS)

Sep 22, 2015 | Dodge Cars & Trucks

1 Answer

How to fix code p2004 on 2005 ford focus


you code is here

P2004 Ford Intake Manifold Runner Control Stuck Open Bank 1


Possible causes - Intake Manifold Runner Control (IMRC) monitor signal shorted to power
- Faulty Intake Manifold Runner Control (IMRC) actuator
- Faulty Intake Manifold Runner Control (IMRC) solenoid
- Damage Powertrain Control Module (PCM)
- Blocked vacuum hoses
alt="What does this mean?"> What does this mean? Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P2004 Ford Description The P2004 is set when the Intake Manifold Runner Control (IMRC) is commanded closed by the Powertrain Control Module (PCM), but the IMRC indicates open.


Read more: http://engine-codes.com/p2004_ford.html#ixzz3lke1SreV

Sep 14, 2015 | Ford Cars & Trucks

2 Answers

P2004 code. where is the imrc valve located?


It is attached to the intake manifold, it is a valve that adjusts the runner length of the intake for optimal performance and fuel economy.

Jan 25, 2015 | 2006 Pontiac G6 GTP

1 Answer

Chhrysler sebring 2007 2.4 litter getting code p2004 intak manifold runner control how do you fix it


code p2004 refers to intake manifold air control actuator bank 1---actuator stuck open===causes --wiring--intake manifold air control actuator --mechanical fault.
also refers to intake manifold air control solenoid bank 1 solenoid stuck open===causes--wiring intake manifold air control solenoid --- mechanical fault
you may be able to remove and clean the units to ensure they move freely otherwise replace them

Dec 31, 2013 | Cars & Trucks

1 Answer

Code p2004 saying intake manifold runner control sturck open. bank 1


code p 2004 has two references
intake manifold air control actuator , bank 1 --actuator stuck open====causes ---wiring---intake manifold air control actuator ---mechanical fault
second reference is
intake manifold air control solenoid , bank 1 --solenoid stuck open===causes ---wiring--intake manifold air control solenoid ---mechanical fault
probably means the same as what you have but in a more easy to understand method
--2012

Nov 26, 2017 | 2010 Dodge Caliber

1 Answer

P2004 intake man.control bank 1 stuck open


The intake manifold runner control (IMRC) cables have plastic ends that like to break. Check your IMRC to see if the cable it attached. If the cable s attached, then the IMRC actuator is probably defective. (see diagram)

6_17_2012_2_48_42_pm.gif

Jun 17, 2012 | 2003 Ford Focus

1 Answer

P2004 INTAKE manifold runner stuck open control bank 1.


Hi there,
I have a Mazda 6 which recently had black smoke / soot coming from the exhaust. On inspection, the inlet manifold was stuck open. I have just had the garage replace the control solenoid for the inlet manifold and so far the car is running ok.

Apr 05, 2012 | Ford Focus Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5655 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...