Question about 1997 Chevrolet Blazer

1 Answer

I have a 1998 Blazer 4x4. 4wheel low light flashes but will not engauge.High wheel will engauge.Can yall help me fix this.Thank You.

Posted by on

  • jlflowers151 Oct 09, 2010

    Thank You for your response.Is this part easy to replace.Where is it located.How much will it cost.

  • jlflowers151 Oct 09, 2010

    Thank You Azraelsrl. Have a great day.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 11,800 Answers

The selection is done by an electrical actuator - this part is defective and must be replaced. Here it is
http://monsterautoparts.com/CHEVROLET/s10/s10_%20blazer/chevrolet_s10_blazer_transfer_ca.htm

Posted on Oct 09, 2010

  • Azrael SRL Oct 09, 2010

    Yes,it's easy to replace - all you need is to unhook the electrical connector, remove the three bolts fixing it in place and slide it out.



    It's on the side of the transfer case, you will need to lift the truck on some very sturdy supports and crawl underneath it to access the actuator.

  • Azrael SRL Oct 09, 2010

    Glad i could help. Please don't forget to rate.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4x4 inop


Check underneath for interferences, etc. Look near the transmission. Those transfers had a bad habit of wearing our the splines. You made need a replacement.

Nov 21, 2013 | 1998 Chevrolet Blazer

1 Answer

Stuck in 4 wheel lo, how do i get it back to 2 wheel hi ?


On these issue, there are few solved help links for troubleshooting the issue easily.-------

Click the link below: ---

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------

4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------

Car will not go into 4WD high or 4WD low?


http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------

4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------

4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------

2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------

2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------

4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------

4x4 will not engage on Ford F150?

http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------

Dodge Ram 4x4 light keeps flashing

4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------

Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

Dec 09, 2012 | 1999 Chevrolet Blazer

1 Answer

I have a 1998 explorer and the 4wheel drive will switch on like it should and the lights do not blink or anything but I can tell the rear end doea lock in low but never any power to front axle in any...


On these issue,there are few solved help links for troubleshooting the issue easily.-------

Click the link below:---
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------
4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------
Car will not go into 4WD high or 4WD low?


http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------
4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------
4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------
2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------
2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------
4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------
4x4 will not engage on Ford F150? http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------
Dodge Ram 4x4 light keeps flashing 4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------
Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

Nov 23, 2012 | Cars & Trucks

2 Answers

Flashing 4WH and 4WL lights on the dash with switch position on Auto. What does it mean and what is needed to fix the problem? Car dirves fine.


This is purely a guess, but it seems to point towards the four wheel drive High and Low range, (Transmission)

Jul 12, 2010 | 1998 Ford Explorer

1 Answer

When you start the car the 4 wheel high and 4 wheel low indicators light and flash four times,


To make the lights stop blinking and actually engage the transfer case you have to maintain the electric motor that engauges the transfer case. the contact points inside get worn and corroded and wont allow enough power through to rotate the servo. The motor is located on the transfer case and is held of by 3 bolts, remove and unplug. Any good 4-wheel drive shop can fix it for you for about $50 or you can take it apart and clean the contact points inside and relubricate it yourself in about 15 minutes. reinstall and your 4 wheel drive will stop flashing and actually work.

Feb 07, 2010 | 2003 Ford Expedition

3 Answers

4wd how to enguage


make sure your in nutural, or park then if you have hub locks turn them to locking position. then shift small shifter if available into 4 wheel low or high. or may have just a push button to engauge. then shift into low or high. then you may use your regular stick to shift or just shift into drive w automatic.

Jan 27, 2010 | 1998 Isuzu Rodeo

1 Answer

1998 Expedition 4AWD engaugeing at low speed


Go back and talk to the service manager. If he wont do anything go to his higher up.

May 06, 2017 | 1998 Ford Expedition

1 Answer

96 blazer


With the selector in 2WD, attempt to slowly move the car forward (drive)and backward (reverse) in an area of 15 or 20 feet. That should release the 4WD gearing engagement.

Good luck
Aduz

Mar 27, 2009 | 1999 Chevrolet Blazer

1 Answer

No 4wd high range


checkunder the battery pan there is a bellows type of thing acid got on mine and ate the connection up i replaced this unit and 4wd worked by the way u only have 2wd low the transfer case has shifted the the trannie output to low range rear tires will spin not the front the cable that broke shifts a fork in the front pig 2 get the front wheeles engauged not a master tech it happened to me bout 4 years ago

Dec 01, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...