Question about 1997 Dodge Caravan

1 Answer

Whats the easiest way to change the back 3 plugs on the 3.3?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 5,332 Answers

It is not impossible to do them from underneath the van. You can also try removing the wiper tub.

To get the wiper tub out you'll need to remove,

the wiper arms
the plastic cowl cover
5 or 6 10mm nuts
4 or 5 13mm bolts
Unplug the wiper motor

And pop the whole assembly out. There will be a lot of room once it is out.

Posted on Oct 09, 2010

  • 1 more comment 
  • mooneyorvill Oct 09, 2010

    which is easier, from underneath, or thru the assembly hole?

  • Jeremy W.
    Jeremy W. Oct 09, 2010

    It's a catch 22. Either way there not the easiest to get out. Personally I do them from underneath most of the time. On the other hand it only takes about 20 minutes to pull the wiper tub. The most difficult part will be getting the wiper arms removed from the posts. Sometimes they can be a real bear to get them to break free.

  • mooneyorvill Oct 10, 2010

    Well, i'm here to inform ya, even with the wiper assembly out of the way, you need plastic man to fit his hand between the body and the intake manifold!! Goin at it from below!!!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the easiest way to replace a cv axle on a 1997 honda civic


There is only one way to change a c/v joint, no such thing asan easy way to do a job cprrectly

Jul 24, 2015 | Honda Cars & Trucks

1 Answer

Whats the best and easiest way to change the 3 rear spark plugs on a 1996 pontiac grand am 3100


If this is the same question about the dog bone, its been answered.
Sometimes you can reach the plugs from under the car too.

Jul 27, 2012 | 1996 Pontiac Grand Prix

1 Answer

Got 3 spark plugs in back of motor whats the fastest way to change them. I have a 3.1 motor


This is how i changed the plugs in my old 3.1 Lumina. Remove the top motor mounts. Set the parking brake and start the motor. Shift to Reverse. This will tilt the motor forward and allow you some access to the plugs in the back. To get the motor back into position to reattach the mounts, just release the parking brake and the motor shound rock back into position. It may be necessary to shift to drive, though. You might have to jam a metal bar somewhere in between the motor and frame to get it to maintain position. It's been a while since I've done it, so I don't exacly remember where I jammed the bar. But this is still the easiest way I've found of accessing those rear plugs. Hope this helps you out. Best of luck!

May 24, 2011 | Chevrolet Lumina Cars & Trucks

1 Answer

Whats the easiest way to change a fuel pump in a 2000 GMC Jimmy?


There is no easy way
the tank needs to be dropped
If there is a drain plug on the tank do that first
if there is a lot of fuel it will be easier to syphin it first

Nov 29, 2010 | 2000 GMC Jimmy

1 Answer

WhaT IS THE EASIEST WAY TO CHange the back spark plugs on a 2005 chevrolet equinox?


The easiest way to change the back plugs on a GM V6 is to pay someone else to do it. You need good light, good tools, lots of various extensions, swivels, and universals. A good vocabulary of curse words also comes in handy.

Oct 03, 2010 | 2005 Chevrolet Equinox

1 Answer

Whats the easiest way to change the spark plugs on a front wheel drive 2001 ford escape


3/8th drive socket set with universal and a few extra extensions

Dec 24, 2009 | 2001 Ford Escape

1 Answer

How to change headlight bulb on a smart car


you need to remove the front wing on the side that the bulb has blown,and the centre panel, then there are 3 torx bolts holding the light assy in.then its just the bulb unit clips out.

Dec 02, 2009 | 2008 Smart fortwo

1 Answer

Whats the easiest way to change my dash board 4x4 switch?


The best way is to pull the front cover back with a flat-head and disconnect the wires and then push is through the front

Oct 21, 2008 | 1999 Chevrolet Blazer

1 Answer

Spark plugs


i generally take the right front wheel off and go through the wheel well you have an easier access to the plugs and you don't have to use so many extensions and universal adapters.......please rate this

Aug 22, 2008 | 1990 Ford F150

Not finding what you are looking for?
1997 Dodge Caravan Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...