Question about 2004 Chrysler Sebring

1 Answer

REPLACED BATTERY IN VEHICLE. I KNOW THAT THE COMPUTER HAS TO RESET. WHAT IS THE PROCESS. CAR STARTS FINE. ALL ACCESSORIES WORK. BUT WONT HOLD IDLE.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,826 Answers

The computer will gather data as you drive it normally at various speeds on the highway and in town.

If the idle continues to not hold at the specified rpm then I would check into the iacv or idle air control valve being non functional or having dirty passage ways.

Posted on Oct 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset computer in a 2008 impala


Have you driven the vehicle? Sometimes after battery replacement some of the dash lights illuminate but once the vehicle is driven they reset!

Dec 11, 2014 | 2008 Chevrolet Impala

2 Answers

RESTART VEHICLE AFTER BATTERY CHANGED


Computer reset for starters
Second alternator is failing get tested
Third fuel filter and pump
These are the norms for routine maintenance with battery change
Since battery died we know it wasnt getting voltage on the road
Or it was getting it intermitently
The alternator can pass tests intermitently
When checked
The best old fasioned way of testing alternator run vehicle disconnect from battery positve side
Let run if power drop or car stops alternator needs replaced
Battery is only good for starting a vehicle
All other power like accessories comes from a transformer in vehicle that stores voltage
Youll see in car a second bar with ground and power going to it this is your transformer do not jump accross transformer
Other then mentioned above routine maintenance is needed

Nov 17, 2014 | 2004 Kia Amanti

1 Answer

On day car starts fine next day the car wont


I own a 2001 Dodge Intrepid and this use to happen to me. I replaced my crankshaft position sensor and it's working fine now. Oh by the way, it will be underneath the vehicle towards the middle of the front seats outside the car. Let me know if that worked out for you. I only paid $12.00 at AutoZone after purchasing too many sensors figuring the problem which cost me over $50.00 per sensor. Good luck and take care. :-)

Apr 15, 2014 | 2004 Dodge Intrepid

1 Answer

How to reset the 1998 Lexus ES after changing the battery/


turn the key on disconnect the negative battery cable then disconnect the positive then hold down the breaks or hit the horn until it stops blowing or you cant see the break lights any more then wait 15 minutes for computers memory to clear then turn the key off and hook your battery back up and start vehicle computer should be reset. make sure to hit either brakes or horn cars store a small amount of electricity even after the battery is unhooked

Mar 20, 2013 | Lexus ES 300 Cars & Trucks

1 Answer

Car wont start, seems like computer has to be reset, how can i reset the computer?


Computers store codes, if a fault in a system is detected

You clear the codes after the repair is made,no resetting

All sensors have to remain connected & working as designed

First you check that the battery is good & has at least 12.6 volts
& holds that after cranking

Then you check for codes & go from there

Do you have fuel pressure at the engine?

Do you have spark while cranking?

The air ducting & MAF Sensor have to be in place?

Nov 22, 2012 | 2003 Nissan Altima

1 Answer

Security light comes on and vehicle wont start


You could try resetting the computer. The car maybe in lockout mode. Try turning your car over….leave the ignition on. Wait exactly 10 min. Then try turning over again….again leave the key on. Wait exactly 10 min and do it a third time….this time the car should start…maybe run a lil rough while it relearns the processes of your vehicle again. It is important to wait the exact 10 min each time. You will probably need a battery charger or a set of jumper cables because if your car goes low during this process it will not work. Good luck and I hope this works.

Apr 15, 2010 | 2003 Pontiac Grand Am

1 Answer

Wont start and a ticking noise is coming from the auto hdlp ctrl


You could try resetting the computer. The car maybe in lockout mode. Try turning your car over….leave the ignition on. Wait exactly 10 min. Then try turning over again….again leave the key on. Wait exactly 10 min and do it a third time….this time the car should start…maybe run a lil rough while it relearns the processes of your vehicle again. It is important to wait the exact 10 min each time. You will probably need a battery charger or a set of jumper cables because if your car goes low during this process it will not work. Good luck and I hope this works.

Apr 14, 2010 | 2001 Pontiac Grand Am SE

1 Answer

The theft system wont let me turn on my car it only cranks but wont stay on


You could try resetting the computer. The car maybe in lockout mode. Try turning your car over….leave the ignition on. Wait exactly 10 min. Then try turning over again….again leave the key on. Wait exactly 10 min and do it a third time….this time the car should start…maybe run a lil rough while it relearns the processes of your vehicle again. It is important to wait the exact 10 min each time. You will probably need a battery charger or a set of jumper cables because if your car goes low during this process it will not work. Good luck and I hope this works.

Apr 06, 2010 | 2002 Pontiac Sunfire

1 Answer

1993 pontiac sunfire turns over but wont start.I can hear fuel pump working? help!!


This works for a 96-98 grand am for sure. Maybe help ou out? You could try resetting the computer. The car maybe in lockout mode. Try turning your car over….leave the ignition on. Wait exactly 10 min. Then try turning over again….again leave the key on. Wait exactly 10 min and do it a third time….this time the car should start…maybe run a lil rough while it relearns the processes of your vehicle again. It is important to wait the exact 10 min each time. You will probably need a battery charger or a set of jumper cables because if your car goes low during this process it will not work. Good luck and I hope this works.

Mar 30, 2010 | 1993 Pontiac Sunbird

2 Answers

2005 yukon denali, a/c worked fine until battery died


Get the climate control computer relaced or reprogrammed. There is a good chance that when your vehicle was jump started it fried the climate system.

Jul 05, 2009 | 2004 GMC Sierra

Not finding what you are looking for?
2004 Chrysler Sebring Logo

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...