Question about 2008 Chrysler Sebring

1 Answer

I have a 2008 crysler sebring my car will start but when i press the breaks to put it in gear it wont move from park

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Your car was likely involved in recall K16 for a transmission interlock spring clip, if it breaks your car gets stuck in park. You will most likely have to have you car towed to a dealership to get the repair, the recall repair is free although you may have other problems that would be your liability.

Posted on Nov 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

When i start my car and go to put it in gear it wont move.


When you say rocky spot, what do you mean? If you mean there were rocks in the roadway, you could have put a small hole in the transmission pan which leaked all the fluid out of it. First thing I would do is check the fluid level on the transmission dipstick and look for leaks on the ground under the car.

May 01, 2015 | 2002 Ford Taurus

1 Answer

Car wont start


Probably the gear selector switch on the transmission. You might try cranking it in neutral. The switch prevents you from cranking the engine in drive or reverse and also turns the backup lights on.

Jan 22, 2014 | 2008 Chrysler Sebring

2 Answers

Stick is lock on park cant put on drive by pressing break wy


have friend bump car just a little to move it apply break put on parking break
start vehicle press brake take out of gear let off emergency brake
you park on hill so this is called shift lock always use the emergency parking break when on hill so you dont get shift lock

Nov 09, 2013 | 2004 Ford Freestar

1 Answer

My jeep wrangler 2008 - I shifted to reverse then to parking, when i release the breaks it kept going in reverse. So i turn off the engine. now it wont start the engine, neither the shifter will move


The shifter cable has broken more than likely ,Find the shift shaft on the transmission,,block the wheels and remove the shift cable from the shift shaft,put the gear shift in park,then shift the shift shaft in park,then it will start,Then of course you will have to replace the shift cable.

Oct 05, 2013 | 2008 Jeep Wrangler

1 Answer

My crysler sebring wont go into gear from the inside of the car, it want go out of park. But I can go under the hood of my car and get it into gear. I was wonder what the problem could be and how much


I would say its the brake switch located on the brake pedal. follow your pedal up and youll see it. when it goes bad you will not be able to take the car out of park. do you have brake lights?

Feb 02, 2013 | 2003 Chrysler Sebring

3 Answers

My 2008 Chrysler is stick in park


emove trim ring around gear sift, turn the car on, push down on breaks, use a screwdriver to push little pink plastic piece back

Jun 03, 2010 | 2007 Chrysler Sebring Sedan

1 Answer

Cant get it out of park


cant shift out of park 2008 sebring conv

Apr 02, 2010 | 2008 Chrysler Sebring

1 Answer

2008 sebring convertivble -m wont shift


if was running fine and and next day just wont go y woulthink is probably oyu input or output speed sensor,oyu need to check it with scanner and see if is that is the problem and not you tranny brain

Sep 27, 2009 | 2008 Chrysler Sebring Convertible

1 Answer

Sebring wont get out of park


Newer cars REQUIRE you to press on the brake to get into gear. If the switch at the brake pedal is not working, or the solenoid at the gearshift is not working. The shifter is stuck. You MUST have a little slot by the shifter covered with a small cover. Check your manual, a key in that slot releases the shifter should you have the above problem or the battery is dead and no power to that release solenoid.

Jul 24, 2009 | 2008 Chrysler Sebring Convertible

1 Answer

2008 avenger


possibly the brake light switch

Jun 05, 2017 | 2008 Dodge Avenger

Not finding what you are looking for?
2008 Chrysler Sebring Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...