Question about 1994 Chevrolet Camaro

1 Answer

1994 camaro 3.4l v6

Gudmornin,my camaro is starting to **** slightly as i drive and it revs to a high value. it is an automatic. there is a light that comes up on the dash,it looks like a engine and small lines at the top of it.

Posted by on

  • Anonymous Feb 18, 2009

    Seems like my camaro is not getting the proper gas flow.Sometimes I cant get it to crank and I think its the gas filter, but Im not sure.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

That is your check engine light. Use an OBD2 scan tool and find out what trouble code it is. After you find out what it is you will be able to shut it off. Hope this helps.

Posted on May 30, 2008

  • Eric Rodriguez Jun 02, 2008

    I don't understand how you would rate this inappropriate. If you would use a scan tool, then you would get an error code, Thus solving the problem. Once you know what error it is, then you know what to fix. The scan tool tells you everything you need to know. You people just want the answers and don't want to do any footwork. You seem to forget that I have taken my time to help you out for free and all you try to do is drop my rating. How ungrateful!

  • CaptainAmzng Oct 19, 2010

    A '94 Camaro is OBD1...



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 94 chevy Silverado 5.7l with 4l60 transmission will a 97 chevy Silverado 4l60 work even if the speed sender is on different side and made different on transmission

Chevrolet / GMC / GEO Transmission Look Up Table
Blazer, 1993-, 4L60-E. Blazer, 1994 - Up, 6.5L V8 Turbo Diesel, 4L80-E. BLAZER/TRAIL BLAZER/JIMMY, 1995-2003, 4 SP RWD/4X4, L4 2.2L L6 4.2L V6 4.3L ...

Transmission Applications - GM Automatic Transmissions
Avalanche, 2001-06, V8 5.3L 5.7L 6.0L, 4 Spd RWD/4X4, 4L60E. Avalanche, 2004-06... Camaro, 1994-05, V6 3.4L 3.8L, 4 Spd RWD, 4L60E. Camaro .... Monte Carlo, 1997-05, V6 3.8L (W/S.C.), 4 Spd FWD, 4T65E. Monte Carlo ... Silverado, Sierra,1500-3500, 1995-06, V8 4.8L 5.0L 5.3L, 4 Spd RWD/4X4, 4L60E. Silverado ...

4L60E Transmission Rebuilt ' eBay

Dec 27, 2015 | Cars & Trucks

2 Answers

Why is my '94 Camaro V6 idling too high?

Changing a fuel pump shouldn't affect the idle.Was it ok before the pump was changed? Look for any source of vacuum leak under the hood from the hoses causing unmetered air to enter the engine. Make sure the throttle is not stuck open slightly. Is the check engine light on? If so have the codes scanned for possibleTPS or IAC problems

May 03, 2015 | 1994 Chevrolet Camaro

1 Answer

Not shifting

Have you checked your automatic transmission fluid. If the shaft came out of the tail of the transmission, you loose fluid and that's what it sounds like as far as the symptom you described. As far as the speedo not working, I would check all your connectors on the transmission to make sure when the drive shaft came off it didn't knock off your connector.

Jul 01, 2013 | 1994 Chevrolet Camaro

2 Answers

What is the part number for a carrier bearing on 1995 chevy camaro

(a little late in responding - but maybe someone will need this info).

If you mean the carrier bearing on the driveshaft - then you must have a v6 model. I would advise to skip replacing it and instead purchase a 1pc shaft (no carrier bearing). The cb is located near a Hi-Speed CV Joint which make changing the carrier a little difficult.
A new replacement 1pc driveshaft costs about $225.00
The carrier bearing itself may run $40-$140. ( ) - for reference...
You could also check a junk yard for a 1pc oem shaft (most shafts there are bent or have bad uj's and will cost $$ to have fixed )
>1994-2002 f-body models all have the same length from the seal of the transmission to the center of the uj @ the diff.
>when looking for an oem 1pc shaft you will find them in Steel and Aluminum. Slight differences in length when measuring center to center of the universal joints ( 40 7/8" - 40 1/2" ) - but the slip yokes vary in length, weighted / non-weighted..etc = this will make it appear the the shafts are different.
>>watch out for oem shafts with the weighted slip yoke from manual 6spd v8 models. This slip yoke may hit the trans/exhaust mount that is used on v6 models.!!

Jan 13, 2013 | 1995 Chevrolet Camaro

1 Answer

I replaced the fuel pump, the EGR, MAP,IAC,sensors and now the engine revs too high at start around 3200 rpm, the revs go down when put in drive to 1500rpm 1991 Chevy Camaro V6 3.1 Everyone here said to...

My experience has been with later model vehicles, but a bad throttle position sensor most definetly causes this type of situation. Two torx screws, opposite side if the throttle body, should have a three wire plug.

Aug 17, 2011 | 1991 Chevrolet Camaro

1 Answer

2001 Camaro V6, ran low on gas now engine wont start. It did start once but was very rough and wouldn't rev.

Maybe the fuel filter is clogged up and pressure to the injectors isn't high enough. Test the pressure by reading the pressure off of the fuel rail at the test port.

Dec 18, 2010 | Chevrolet Camaro Cars & Trucks

1 Answer

Trying to start the car its like the timing is advanced so the motor dont turn freely this is a 94 camaro v6 automatic

it is possible that your timing is advanced . you timing chain may have jumped a tooth or two . the best way to find out if this the problem is to hook a timming light to it and check that way. or you can try loosening the bolt and turn your distrbutor back acouple of degrees and try to start your camaro. good luck

Jun 27, 2010 | 1994 Chevrolet Camaro

1 Answer

S10 blazer surges

might wanna check intake gasket for leaks on the high engine rev as for tranny might be in the comp

Dec 05, 2008 | 1994 Chevrolet S-10

Not finding what you are looking for?
1994 Chevrolet Camaro Logo

Related Topics:

492 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides