Question about 2004 Chevrolet Impala
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is what I could find, hope it helps.
REMOVAL & INSTALLATION
See Figures 1 and 2
The following procedure is a general procedure for console removal. You may have to modify or skip certain steps depending upon your vehicle.
Fig. Fig. 1: Remove the retainers, unplug the connector, then remove the console door
Fig. Fig. 2: Exploded view of a typical console mounting
Posted on May 04, 2009
There are 2 10mm bolts in the compartment hold of the center console that must be removed. Two similar 10 mm bolts must be removed at the front of the center console, near the driver's and passenger's lower legs. The top of the center console, where the shifter is located, snaps out. With this top piece removed, the cigarette and auxilary outlet can be disconnected. Four more bolts near the shifter bracket need to be removed, and then the console is free. Hope this helps someone. I needed to remove the center console to install a component for a car stereo.
Posted on Jul 07, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Solved it. Found a small shank screwdriver that fitted into the opening with a little bending of the plastic frame. managed to replace it with a new one without trouble. No further help needed. dave
Posted on Nov 09, 2009
Tips for a great answer:
Oct 16, 2015 | 2002 Kia Sedona
Aug 23, 2014 | 2004 Suzuki Forenza
Apr 20, 2014 | 2004 Chevrolet Impala
Nov 03, 2009 | 2004 Chevrolet Impala
Aug 07, 2009 | 2004 Audi A4
Jul 06, 2009 | 2003 Chevrolet Impala
Aug 03, 2008 | 2001 Chevrolet Impala
549 people viewed this question
Usually answered in minutes!