Question about 1999 Mercury Sable

Open Question

1999 mercury sable wont hold idle - 1999 Mercury Sable

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2003 mercury sable, not idleing right

I was looking under the hood, and noticed that i could hear air rushing around. I found that a vacum hose had decayed and cracked. After i replaced that, everything has been fine

Posted on Jan 13, 2009

  • 1 Answer

SOURCE: cannot find idle air control valve

3.0 and 3.8 engines are next to the throttle body [throttle cable hooks to it] and is bolted down with two 5/16 head bolts,is about three inchs long and 1 1/2 round

Posted on Jan 17, 2009

  • 1 Answer

SOURCE: 2000 MERCURY SABLE

My 2000 Sable starts blowing hot air about every 6 months. I mean like an oven. All I do is disconnect the battery negative terminal for about 5 minutes. After I re-connect the problem is solved. This solves many problems on this car, it just needs a re-boot. It must be powered by Microsoft (ha ha). Good luck. ps my auto headlamps never did work right either. Dave.

Posted on Apr 21, 2009

  • 232 Answers

SOURCE: MERCURY SABLE - NO PROBLEM WITH TRANS. YESTERDAY

First check the transmission fluid level. If the car is cold it should be on the bottom line or other cold indicator in the transmission dip-stick. If the fluid (transmission oil) is within specs try giving it a tune-up. If the fluid is low you obviously have a leak. It could be leaking from the transmission pan gasket or the fluid cooling hoses that go to the radiator. Let me know what you find.

Posted on May 11, 2009

arquetteg
  • 37 Answers

SOURCE: 2000 Mercury Sable LS

Probably need a fuel pump

Posted on May 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a whining noise coming from my 1999 Mercury Sable. Starts at about 20 MPH and increases getting the loudest around 40-60 mph then holds steady, have shifted to nuetral and whining stays. I believe...


Could be anything connected with the front wheels.
So that includes hub-wheel bearings, axle joints, the differential gears, and the transmission.

Feb 23, 2013 | 1999 Mercury Sable

1 Answer

1999 Mercury Sable 24v OHC engine, starts normal but when engine begins to idle it runs rough and dies


this is a difficult one..
check for vacuum leaks by possibly a visual inspection and then spraying starting fluid around hoses , intake and so on..if any change, you might have found a vacuum leak/bad gasket.
otherwise, DO clean the Idle Air Control Valve 1st.
then check and clean EGR valve next..

Sep 30, 2010 | 1999 Mercury Sable

1 Answer

88 mercury sable start service light on then goes out idle rough runs good down the road wont pass emission


you got a miss in the ign. system do a full tune-up, wires, plugs and filters

Sep 12, 2010 | 2001 Mercury Sable

1 Answer

1999 Sable: Initially took a few cranks for the car to start. ...


while you state the battery is "strong" what kind of voltage are you getting to the starter solenoid

May 18, 2010 | 1999 Mercury Sable

1 Answer

No diagram for 1999 mercury sable for serpentine


Click on the following free direct Link.
It has the correct Belt Diagrams for your 1999 Mercury Sable 3.0L V6.

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1999/make/mercury/model/sable/1999_mercury_sable_drive_belt_routing_diagram.htm

Nov 07, 2009 | 1999 Mercury Sable

1 Answer

Looking for shift solenoid on 1999 Mercury Sable


I believe these are internal you must drop the trans. pan down to access it.

Jul 03, 2009 | 1999 Mercury Sable

1 Answer

Rear speakers 1999 mercury sable


To remove the rear speakers you will need to remove the plastic covers that are behind the seats. The screws are located in the trunk. I believe there are 8 of them, but don't quote me on that.

Once that plastic is removed, the screws holding down the speakers will be clearly visable.

Jan 21, 2009 | 1999 Mercury Sable

3 Answers

Need the fuse box diagram for the 1999 mercury sable gs?


if you have an owners manual there should be one in there but if not it should be under the cover to the fuse box also there is one under the hood of the car as well

Dec 29, 2008 | 1999 Mercury Sable

1 Answer

1999 mercury sable has varying idle. jumps up and down randomly.


if the idle jumps up and down you have a vaccum leak somewhere in the system look around the intake on the engine for a loose or miising hose

Sep 03, 2008 | Mercury Sable Cars & Trucks

Not finding what you are looking for?
1999 Mercury Sable Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

fordexpert

Level 3 Expert

5474 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...