Question about Dodge Ram 1500

1 Answer

I get wind noise when diiving down the interstate,is there an adjustment to tighten up the latch on a 2003 Dodge Ram?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 365 Answers

The pin on the centre pillar where the door locks onto should be adjustable but you may need a torx bit to loosen it

Posted on Oct 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install quarter window that flips out on 2003 dodge Dakota. 2 door.right side


REMOVAL

(1) Remove quarter trim panel.

(2) Remove the bolts attaching the latch to the cab


side panel.



(3) Remove the nuts attaching the frame/hinge to

the B-pillar.

(4) Remove the glass from the cab.
(5) If necessary, remove the latch from the glass.

INSTALLATION

(1) If removed, install the latch to the glass.

(2) Center the window glass at the opening, insert

the hinge studs in the B-pillar holes, and install the

nuts.

(3) Attach the latch to the rear side panel with the

bolts. Tighten the bolts with the latch in the lock

position and pushing rearward on the latch.

(4) Test the vent window for water leaks.
(5) Install quarter trim panel.

INSTALLATION

(1) If removed, install the latch to the glass.

(2) Center the window glass at the opening, insert

the hinge studs in the B-pillar holes, and install the

nuts.

(3) Attach the latch to the rear side panel with the

bolts. Tighten the bolts with the latch in the lock

position and pushing rearward on the latch.

(4) Test the vent window for water leaks.
(5) Install quarter trim panel.

Oct 02, 2016 | 2003 Dodge Dakota

1 Answer

How to change parking brakes on 2003 dodge ram


  • 1 Determine which type of emergency brakes your Dodge Ram will need. Emergency brakes typically function by activating the regular braking system on the driving wheels. The emergency brakes for the Dodge Ram have used rear disc brakes since 2001.
  • 2 Release the parking brake pedal completely and raise your vehicle. Remove the tire and wheel with a socket wrench and disconnect the brake caliper from the caliper adapter. Slide the rotor from the axle shaft.
  • 3 Install the new brake rotor onto the axle shaft and complete the installation by reversing the removal steps.
  • 4 Tighten the wheel mounting nuts in the proper sequence with a torque wrench until the nuts are torqued to 47.5 foot/pounds Repeat the tightening sequence to torque the nuts to 95 foot/pounds.
  • 5 Apply and release the park brake pedal to seat and adjust the parking brake cables. Road test the vehicle to ensure the vehicle's brake system is functioning.
  • 6 Place tool C-3919 or the equivalent over the park brake shoes and use the star wheel adjuster to lower the park brake shoes until the lining just touches the jaws on the tool.


  • Read more : http://www.ehow.com/how_4521030_replace-emergency-brakes-dodge-ram.html

    Dec 31, 2014 | Dodge Cars & Trucks

    1 Answer

    Tailgate adjustment


    adjust the tail gate lock/ latch to tighten the gate up on the rubber seals

    Jan 02, 2014 | 2003 Ford Explorer

    1 Answer

    Hood release will not work


    While having someone pull release, trying banging with palm of hand on front of hood near latch, it may just release. If that fails, try getting a small pair of pliers or vice grips on cable behind lever you pull to open, and trying pulling cable more, that way. There should be a way to adjust /tighten cable once you get it open and look at latch where cable is attached. Lubricate mechanism as well once open.

    May 30, 2013 | 1999 Dodge Ram

    1 Answer

    2002 dodge quad cab -wind noise at top of driver door and door vibrates -how to fix


    check the bolts on the hinges on the door also the bolts on the latch it self

    Jan 28, 2013 | Dodge Ram 1500 Cars & Trucks

    2 Answers

    Hood release wont latch


    replace hood release cable or lubricate the cable to free it up.
    In the mean time, push the cable back in and see if that helps.


    Jul 20, 2010 | 1999 Dodge Ram

    1 Answer

    Loud squeal noise from serpentine belt on 99 dodge truck with 318 motor when its cranked up


    If you have an manual adjuster you need to tighten or replace the belt, belt treatment may help.
    If you have an automatic adjuster. You can try belt treatment, if it doesn't work you'll need to replace the belt and maybe the adjuster.

    Jun 06, 2010 | 1998 Dodge Ram 1500 4WD

    1 Answer

    My 2001 Dodge ram 1500 will not shift into reverse, all it does is rev up...my tranny fluid is good, and it drives fine in drive


    The reverse band on transmission is out of adjustment. To correct this, drain the transmission fluid and remove the filter. After removing the filter you will see an adjustment screw with a locknut looking down. Back the locknut off 4 turns. make sure the adjustment screw turns freely. tighten the adjustment screw to 72 in-lbs of torque then back off 3 turns, hold the screw to keep it from turning and tighten the locknut on screw to 25 ft-lbs. Replace the filter and fluid,install pan on transmission. hope this will help you.

    May 12, 2010 | 2001 Dodge Ram 1500 Truck 2WD

    2 Answers

    Need to know if there is a fix for excessive wind noise


    it sounds to me like you need to replace the door seals stop by your local dealer parts department and see what the cost is for new ones you can also try www.truckandvan.com or call them at 1-866-272-8407

    Mar 19, 2009 | 2004 Dodge Ram 1500

    2 Answers

    Doors are very hard to shut on my 1988 Dodge ram


    I'm not sure what you were told but the (knobs) are the strikers. Do the latches in the door line up with the strikers? Do the doors hang straight? You might need to adjust the hinges or the striker. If it all does line up then you might need a new latch.

    Mar 14, 2009 | 1988 Dodge D-Series Pickups

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    99 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...