Question about 1998 Chevrolet Tahoe

1 Answer

How to replace the wheel hub on a 1998 chevy tahoe

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 81 Answers

If it is just the hub you want to replace, jack up the rear tire of the hub you want to replace. Put truck on jack stand. Remove the back tire. Take a rubber mallet and beat the hub off the lug studs. It will probably be stuck, since the truck is a 98, because the brake pads inside have worn their way into the hub a little, creating a lip that you will have to overcome with pressure from the mallet. You will probably need to hit it harder than you would think is normal, but if it has to come off...

Posted on Oct 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 chevy Tahoe LTZ Traction control and stability track service message


have truck scanned for code can be simple as a sensor to hub problems

Jul 02, 2017 | Cars & Trucks

1 Answer

Is the front CV shafts required to retain front hubs 1998 Chevy Tahoe Lt 4x4


cv shaft go through the hub on a spline then a outer bolt

hub as a new part

s-l225-4l3mo04yvnp2xdvhjfffy5rf-3-0.jpg

index-4l3mo04yvnp2xdvhjfffy5rf-3-1_0.jpg

Apr 16, 2017 | Cars & Trucks

3 Answers

My 1998 Chevy Tahoe. Shaking it stops around 70 about real bad at 60 miles per hour


get tires checked . out of balance or worse ahve a bad spot on one getting ready to blow out .

Feb 27, 2015 | 1998 Chevrolet Tahoe

1 Answer

Change wheel bearings on 2005 tahoe


jack up an secure truck loosen but dont remove center hub nut ,remove wheel, brakes,hang calipre out of way,remove brake support bracket,disconnect abs connector up by frame,remove rotor remove the 3 bolts that hold hub [wheel bearing] in place remove center hub nut remove hub clean area replace hub rebolt all and done

Apr 06, 2013 | 2005 Chevrolet Tahoe

1 Answer

Grinding noise when turning left or right in my 2005 chevy tahoe.


One, or both, universal joints from the front wheels has failed prematurely. You will have to replace it.
It's a complicated job that implies the complete removal of the wheel hub - something that only a repair shop can do it safely and correctly. It will cost you about $500 (including the replacement shaft and joint) per wheel.

Jan 19, 2011 | Chevrolet Tahoe Cars & Trucks

4 Answers

Why is my abs light on in my 03 chevy? and on the passanger side the front tire is roaring really bad when i drive, please help


Ok, there are sensors on your front wheel hubs. This could easily cause the abs light to turn on. The loud noise could easily be your wheel hub going bad. Easiest way to check, jack up the front of the truck, grab tire, shake back and forth and up and down. Same amout of play each way? You're wheel hub is bad.......

Aug 27, 2010 | 2003 Chevrolet Tahoe

1 Answer

2001 Chevy Silverado anti-lock brakes activate on dry pavement, the pedal pulsates, the typical anti-lock brake sound is heard, and the truck feels like it is not going to stop at times


One of the sensors has gone bad and needs to be replaced, the other thing to that would also do that is the ABS sensor is dirty or needs to be re gaped to the speed ring on the hub. There was a issue bulletin with your Tahoe on the ABS activating under 8 km/h. Good luck and hope this helps, if not clean out the sensor with brake parts cleaner and check the wire harness and ABS sensor bracket. Re gap the sensor to the speed ring hub. Here is the bulletin. Anti lock Brake (ABS) Activation at Low Speeds (Clean Wheel Speed Sensor Mounting Surface) #03-05-25-007C - (05/16/2006) 2001-2006 Chevrolet Suburban, Tahoe

Jun 05, 2009 | 2001 Chevrolet Tahoe

1 Answer

4 wheel drive blowing fuse 1998 chevy tahoe


Need more info. Does it blow fuses all the time, has this problem gotten worse or was out of nowhere, Does it happen when you go into 4wd or out?

May 23, 2009 | 1998 Chevrolet Tahoe

2 Answers

I need a diagram for 1998 chevy tahoe fuel pump


Do you want a diagram, or do you just want to replace the pump?

Dec 08, 2008 | 1998 Chevrolet Tahoe

Not finding what you are looking for?
1998 Chevrolet Tahoe Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...