Question about 2005 Subaru Outback

Open Question

What fuse panel supports the license plate bulbs on the 2005 subaru outback, 2.5l

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2005 Subaru Outback XT - Real Tail light- bulb replacement

1. Open the rear hatch, and look down towards the bumper, in the direction of the tail light bulb needing replacement.
2. You should see the dark colored plastic trim piece, which is held in place by two small plastic body style philips head screws.
3. These wil only 'loosen' a little bit, you will need to slip a fingernail or some other slim item, underneath the heads of each of the screws, and pull back on them firmly by grasping the body of the screw, not the head (which is flimsy, and can crush if squeezed).
3. remove the plastic trim piece - it can be achieved by lifting out and towards you - set aside.
4. Using a 10mm socket or wrench, unscrew the upper and lower bolts holding the taillight assembly in place.
5. the taillight assembly is now loose - it can pulled rearwards, and will slide off of the small guide slots holding it in place.
6. The bulb is a twist lock style, underneath the tan cap- twist the cap counter-clockwise, and it will pop out. The bulb is a number 7440, for the running light/ brake light, and a 7443 for the turn signal. a 3757 will not fit through the cut out hole in the taillight assembly.
7. Re-assemble in reverse, making sure to check the function of the bulb PRIOR to re-assembly.
Good Luck.

Posted on Jan 03, 2009

  • 119 Answers

SOURCE: 2005 subaru outback cabin air filter install

look for identifiacation lable on the drivers door jamb,if you have a filter there should be a warning lable {yellow}.if you do the glove box needs to be removed to gain acess to heater box,if you buy a filter from subaru instructions are inclosed

Posted on Jul 16, 2009

techbuster
  • 5081 Answers

SOURCE: 1999 Dodge Neon rear license Plate bulb

LICENSE PLATE LAMP BULB
REMOVAL

  1. Remove screws attaching license plate lamp to rear bumper
  2. Remove lamp from bumper.
  3. Remove bulb socket from lamp.
  4. Pull bulb from socket.

INSTALLATION
  1. Install bulb into socket.
  2. Install bulb socket into lamp.
  3. Place lamp in position.
  4. Install screws attaching license plate lamp to rear bumper.

Posted on Oct 08, 2009

bschilz
  • 2049 Answers

SOURCE: Fuel Filter for a 2005 Subaru Outback

In 2005 Subaru moved the fuel filters to the fuel tank for both 4-cyl and 6-cyl cars. What is confusing is the statement in the owner's manual about replacement intervals; the statement actually only applies to 4-cyl cars. Even though the filter is mounted in the tank, this is still a replaceable element on 4-cyl, but not on 6-cyl. The 6-cyl filter element is part of the entire fuel pump assembly (a $300 assembly) and is not sold separately. Therefore the 6-cyl filter is intended to be a "lifetime" part, which really means it gets replaced when the fuel pump fails and the entire pump assembly is replaced.

Posted on Oct 30, 2009

Testimonial: "Excellent and timely advice. He cleared up a confusing question I had and got conflicting information from the vehicle owner's manual."

  • 1986 Answers

SOURCE: how to replace license plate bulbs on 2005 cadilac

To change the bulbs all you have to do is put a flat blade screw driver on the right side of the bulb housing and gently push to the left (towards the driver's side). This will release the catch holding it in and it will drop out and down on the end of its wiring connector. Twist the bulb counter clockwise to release it. Replace the bulb and just put the housing back into the opening left side first, then just push up on the right side till you hear a click.

Posted on Nov 18, 2009

Testimonial: "easy"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to take off the cover to the dome light in my 2005 subaru outback wagon. how does the cover come off so i can change the bulb? i didnt wanna try pulling it off and break it.


The bulb in our 2005 Outback dome light has been replaced twice---I found the best way to remove the cover is with a dime.

Good luck!

Jan 03, 2011 | 2005 Subaru Outback

1 Answer

Looking for the headlight bulb for my 2005 subaru


It is only about $8 for the bulb, as long as you have not broken the lens. That costs a lot more.

http://www.drivewire.com/vehicle/subaru-outback/headlight-bulbs/

Nov 18, 2010 | 2005 Subaru Outback

2 Answers

The headlight bulbs keep burning out I have had to have them replaced4 times this year. What is causing this the wiring has been checked


have you got any misting inside the lamp(s)cos that will make the bulbs act like fuses and blow when wet.....

Jul 11, 2010 | 2005 Subaru Outback

2 Answers

Replacing brake light on a subaru outback limited wagon 2000


How To Install Replace Change Taillight and Bulb 2000-04 Subaru Outback

Apr 07, 2010 | 2000 Subaru Outback

1 Answer

License plate lamp doesn't work after replacing


Have you checked for power at the socket? But most vehicles do have 2-3 fuse panels; in different locations.

Jan 26, 2010 | 2005 Chrysler Pacifica

1 Answer

How do you fix the dome light in a 2005 Subaru Outback? It will not turn on, no matter what the position of the switch. Thanks.


Try replacing the bulb. the cover should pop right off. next you could try to check the fuse box it should be on the side of the dash or under the driverside dash.

Nov 07, 2009 | 2005 Subaru Outback

2 Answers

Need to replace license plate bulb on my 2005


1. Open the hatch and stand under it.
2. Remove pull handle from the inside of the hatch (2 screws under pop panels).
3. Starting in the lower corners, gently pry the entire interior panel from the hatch,
and leave it hanging from the wiper area near the glass.
4. Grasp the bulb housing and twist to the left while pressing inward.
5. Replace with a 1156 bulb.

Nov 01, 2009 | 2005 Nissan Pathfinder

1 Answer

Bad groind in subaru, HELP!


earth is making contact with the live at the bulb holder.remove and check.Make sure you have the right bulb in it.then replace the blown fuse.

May 30, 2009 | 2006 Subaru Outback

Not finding what you are looking for?
2005 Subaru Outback Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...