Question about 2000 Lincoln LS

1 Answer

How do i replace the 02 sensor - 2000 Lincoln LS

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,006 Answers

Disconnect the wiring from it and unscrew it from the catalytic converter and then fit the new one in reverse order.

In practice, the old one is usually solidly rusted in place so expect to use plenty of penetrating oil and if that fails you'll need to heat the metal around it with a blow torch to expand the hole it sits in. In theory it's a very simple job, but in practice it can be a real swine. By all means, attempt it yourself, but be prepared to give up and ask a professional to do it. Exhaust (US=muffler) fitting centres do this sort of thing dozens of time daily so have plenty of practice and know all the tricks.

Posted on Oct 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code po161 which is bank 2 sensor 2


That sensor bank 2 is the 02 sensor that monitor thhe catalytic convertor more than likey when you get a code heater circuit its a failed 02 sensor itself so a replacement is to replace the 02 sensor on the second bankcansmo_155.gifcansmo_156.gif

Aug 29, 2011 | 2001 Toyota Highlander

1 Answer

Im getting code P2253 on my 04 Saturn vue with 3.5l V6. Anyway to tell which O2 sensor it is? Thxs Bill


P0804 is the highest OBD-II trouble code.

Here's your Oxygen sensor codes.

P0130 02 Sensor Circuit Malfunction (Bank I Sensor 1)
P0131 02 Sensor Circuit Low Voltage (Bank I Sensor I)
P0132 02 Sensor Circuit High Voltage (Bank I Sensor 1)
P0133 02 Sensor Circuit Slow Response (Bank 1 Sensor 1)
P0134 02 Sensor Circuit No Activity Detected (Bank I Sensor 1)
P0135 02 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1)
P0136 02 Sensor Circuit Malfunction (Bank I Sensor 2)
P0137 02 Sensor Circuit Low Voltage (Bank I Sensor 2)
P0138 02 Sensor Circuit High Voltage (Bank I Sensor 2)
P0139 02 Sensor Circuit Slow Response (Bank 1 Sensor 2)
P0140 02 Sensor Circuit No Activity Detected (Bank 1 Sensor 2)
P0141 02 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)
P0142 02 Sensor Circuit Malfunction (Bank I Sensor 3)
P0143 02 Sensor Circuit Low Voltage (Bank I Sensor 3)
P0144 02 Sensor Circuit High Voltage (Bank I Sensor 3)
P0145 02 Sensor Circuit Slow Response (Bank 1 Sensor 3)
P0146 02 Sensor Circuit No Activity Detected (Bank I Sensor 3)
P0147 02 Sensor Heater Circuit Malfunction (Bank I Sensor 3)
P0150 02 Sensor Circuit Malfunction (Bank 2 Sensor I)
P0151 02 Sensor Circuit Low Voltage (Bank 2 Sensor I)
P0152 02 Sensor Circuit High Voltage (Bank 2 Sensor 1)
P0153 02 Sensor Circuit Slow Response (Bank 2 Sensor 1)
P0154 02 Sensor Circuit No Activity Detected (Bank 2 Sensor 1)
P0155 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)
P0156 02 Sensor Circuit Malfunction (Bank 2 Sensor 2)
P0157 02 Sensor Circuit Low Voltage (Bank 2 Sensor 2)
P0158 02 Sensor Circuit High Voltage (Bank 2 Sensor 2)
P0159 02 Sensor Circuit Slow Response (Bank 2 Sensor 2)
P0160 02 Sensor Circuit No Activity Detected (Bank 2 Sensor 2)
P0161 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 2)
P0162 02 Sensor Circuit Malfunction (Bank 2 Sensor 3)
P0163 02 Sensor Circuit Low Voltage (Bank 2 Sensor 3)
P0164 02 Sensor Circuit High Voltage (Bank 2 Sensor 3)
P0165 02 Sensor Circuit Slow Response (Bank 2 Sensor 3)
P0166 02 Sensor Circuit No Activity Detected (Bank 2 Sensor 3)
P0167 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 3)

Note: "Bank 1" is the side of the engine with cylinder 1. "Bank 2" is the other side.

Jul 03, 2011 | 2004 Saturn VUE

1 Answer

O2 sensors keep failing and a evap leak code i put new gas cap did not cgehan ssomers11@gmail.com


Are you sure it's 02 sensors? Just because code says 02 sensors doesn't necessarily mean they're bad. Bad 02 sensor code can also indicate bad cat. converter. If 02 sensors read exact same reading before and after converter they will trigger OBC to "sensor fault" - they should be reading 2 different readings. (Pre CAT/POST cat) I'd suggest replacing cat converter before replacing sensors.

Mar 14, 2011 | 1999 Toyota Camry Solara

1 Answer

My 2001 passport check engine light was diagnoised by a local parts store as oxyge sensor, now i find out that there's more than one (1) How do i know which one to replace or do i just replace them all or...


No I can not give you the code number because I did not scan it for you. The Diagnostic Trouble Code will show ( example 02 Sensor Bank 1 sensor 2 ) for the sensor at fault, or something simaller for one of the other 02 sensors. Fore ( example 02 Sensor Bank 2 Sensor 2 ).The parts store that did the scan for you should have given you the particular fault code as well as its location. If you replace one 02 sensor, you should replace all of them. Good Luck and have a good XMASS.

Dec 17, 2010 | Honda Passport Cars & Trucks

1 Answer

I have a 1998 ford windstar and i need upstream & downstream 02 sensor but i dont know if i need 1 or 2 upstream sensors.


assueming it has the v-6 in it look at the exhaust pipe comming off the side of the engine there will be two up stream 02 sensors which are heated and one downstream past catalitic conveter. If may have the second style with the Y cross over with 1 upstream before the cat and one after. The difference between the 0-2 sensors is the upstrean are heated so it goes into closed loop faster. I find that on most of these the up stream 02 sensor heaters have failed. You can go to a Autozone and they can pull the codes for you and tell you which side it is that needs to be replaced. However 02 sensors get old after time and they start shifting slowly, if it shifts slowly then it's called a lazy 02 sensor. And will send a code to the computer, if you get the trouble code of the 02 sensor heater is bad you will have to change it, I recommend Replacing both. The reason is if one is going bad the other will soon follow. You can buy a socket wrench For the 02 sensors for 12 dollars makes it real easy to replace the 02 sensors when they are COLD. Hope this helps and thanks for using fix-ya.

Sep 14, 2010 | 1998 Ford Windstar

1 Answer

Escort has engine light on, diagnostics say 02 sensor is out, both were replaced, same code for 02 sensor bad shows up, replaced again, same code shows up


MOST OF THE TIME AN 02 CODE DOES NOT MEAN REPLACE 02 SENSOR..SOME AUTO PARTS STORES WILL SCAN YOUR CAR..TELL YOU CODE 02 SO PEOPLE AUTOMATICALLY REPLACE SENSORS...IF YOU CLEAR THE CODES DOES THE CHECK ENGINE LIGHT COME BACK ON RIGHT AWAY OR DOES IT TAKE A LITTLE TIME... IF IT TAKES A LITTLE TIME THEN YOU HAVE SOME PROBLEMS THAT ARE CAUSING THE EMMISSIONS TO BE OUT OF RANGE.. IF THE LIGHT COMES BACK ON RIGHT AWAY YOU HAVE A PROBLEM IN WIRING HARNESS BETWEEN THE SENSOR AND ECM....MAIN COMPUTER.....OR SECONDLY POSSIBLE PROB IN THE MAIN COMPUTER...GET SOME OF THOSE ANSWERS AND FIND THE EXACT CODE THAT RETURNS THEN GET BACK WITH ME FOR MORE HELP

Sep 01, 2009 | 2000 Ford Escort

1 Answer

Check engine light stays on


You can try to clean them with carb cleaner and a tooth brush but if it has a heated 02 sensor most likely the heater is burned out and will need to be replaced, it would be the one before the catalytic converter. Sometimes the 02 sensor gets slow and will not read fast enough if that’s the case then the piezoelectric coating is malfunctioning so again you have to replace the 02 sensor, they refer this as a lazy 02 sensor, it does not cycle fast enough.

Jul 02, 2009 | 2002 Ford F150 Regular Cab

1 Answer

I have 2004 GMC ENVOY XL the engine light stay on. i do a diagnostic on it the code i get is P1133 HO25/025 INSUFFICIENT SWITCHING SENSOR 1 OR BANK 1 SENSOR 1. also code PO133 02 CIRCUIT SLOW RESPONSE(BANK...


P1133 is a slow 02 sensor or a shorted to ground at the PCM to 02 sensor signal. If the 02 sensor does not cycle fast enought it is called a lazy 02 sensor, the only way to test for this is with a digital volt meter or a scanner. if it will not pulse fast enough it will throw the code so Replace the 02 senor on the driver side bank. Bank one. then clear the codes. The code is thrown do to seveal reasons the 02 sensor could be dirty or it just could be worn out, you could pull it and clean it and try it again or just replace it and be done with it. The cost of a heated 02 sensor is $50.00 at a auto parts store or the dealer might charge a little higher but the cost in savings of fuel is well worth it.

Jun 30, 2009 | 1998 Saturn SC

1 Answer

How do I replace the 02 sensor


well you first need to know which 02 sensor but if you know all it takes is usually a 7/8ths wrench. sometimes you need an 02 sensor socket. but really you unplug it and unscrew it apply the copper anti seeze to threads and install it tighten it up. disconnect battery for 10 min and good to go

May 06, 2009 | 2000 Pontiac Sunfire

Not finding what you are looking for?
2000 Lincoln LS Logo

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...